.. _bme680:
BME680: Integrated environmental sensor
#####################################################
Description
***********
This sample application periodically (every 3s) measures the ambient temperature
in degrees Celsius, atmospheric pressure in kilopascal, relative humidity in percentage,
and gas sensor resistance in ohms. The result is written to the console.
References
**********
- BME680: https://www.bosch-sensortec.com/bst/products/all_products/bme680
Wiring
*******
This sample uses the BME680 sensor controlled using the I2C interface.
Connect Supply: **VDD**, **VDDIO**, **GND** and Interface: **SDA**, **SCL**.
The supply voltage can be in the 1.8V to 3.6V range.
Depending on the baseboard used, the **SDA** and **SCL** lines require Pull-Up
resistors.
Building and Running
********************
This project outputs sensor data to the console. It requires a BME680
sensor. It should work with any platform featuring a I2C peripheral interface.
It does not work on QEMU.
In this example below the :ref:`nrf52840dk_nrf52840` board is used.
.. zephyr-app-commands::
:zephyr-app: samples/sensor/bme680
:board: nrf52840dk_nrf52840
:goals: build flash
Sample Output
=============
.. code-block:: console
Device 0x20002b74 name is BME680
T: 23.988877; P: 97.648568; H: 53.689533; G: 1035.211466
T: 24.168500; P: 97.648866; H: 53.565966; G: 1046.677896
T: 24.336533; P: 97.648596; H: 53.353663; G: 1058.656533
T: 24.589696; P: 97.648366; H: 53.958864; G: 1072.155863
T: 24.856631; P: 97.648322; H: 53.553669; G: 1096.448788
<repeats endlessly>
2cd51a33ce