.. zephyr:code-sample:: led-strip
:name: LED strip
:relevant-api: led_strip_interface
Control an LED strip example.
Overview
********
This sample application demonstrates basic usage of the LED strip.
Requirements
************
Zephyr supports various LED strip chips. For example,
- WS2812, such as the `NeoPixel(WS2812 compatible) LED Strip from AdaFruit`_.
- APA102, such as the `Dotstar(APA102 compatible) LED Strip from AdaFruit`_.
- LPD8806, such as the `LPD8806 LED Strip from AdaFruit`_.
- Power supply. These LED strips usually require a 5V supply.
- If the LED strip connects to the SPI bus, SPI communications usually use 5V
signaling, which may require a level translator, such as the
`74AHCT125 datasheet`_.
.. _NeoPixel(WS2812 compatible) LED Strip from AdaFruit: https://www.adafruit.com/product/3919
.. _Dotstar(APA102 compatible) LED Strip from AdaFruit: https://www.adafruit.com/product/2242
.. _LPD8806 LED Strip from AdaFruit: https://www.adafruit.com/product/1948
.. _74AHCT125 datasheet: https://cdn-shop.adafruit.com/datasheets/74AHC125.pdf
Wiring
******
APA020 and LPD880x
==================
#. Ensure your Zephyr board, the 5V power supply, and the LED strip
share a common ground.
#. Connect the MOSI pin of your board's SPI master to the data input
pin of the first IC in the strip.
#. Connect the SCLK pin of your board's SPI master to the clock input
pin of the first IC in the strip.
#. Connect the 5V power supply pin to the 5V input of the LED strip.
WS2812
======
#. Ensure your Zephyr board, and the LED strip share a common ground.
#. Connect the LED strip control pin (either I2S SDOUT, SPI MOSI or GPIO) from
your board to the data input pin of the first WS2812 IC in the strip.
#. Power the LED strip at an I/O level compatible with the control pin signals.
Note about thingy52
-------------------
The thingy52 has integrated NMOS transistors, that can be used instead of a level shifter.
The I2S driver supports inverting the output to suit this scheme, using the ``out-active-low`` dts
property. See the overlay file
:zephyr_file:`samples/drivers/led_strip/boards/thingy52_nrf52832.overlay` for more detail.
Building and Running
********************
The sample updates the LED strip periodically. The update frequency can be
modified by changing the :kconfig:option:`CONFIG_SAMPLE_LED_UPDATE_DELAY`.
Then build and flash the application:
.. zephyr-app-commands::
:zephyr-app: samples/drivers/led_strip
:board: <board>
:goals: flash
:compact:
When you connect to your board's serial console, you should see the
following output:
.. code-block:: none
***** Booting Zephyr OS build v2.1.0-rc1-191-gd2466cdaf045 *****
[00:00:00.005,920] <inf> main: Found LED strip device WS2812
[00:00:00.005,950] <inf> main: Displaying pattern on strip
References
**********
- `WS2812 datasheet`_
- `LPD8806 datasheet`_
- `APA102C datasheet`_
- `74AHCT125 datasheet`_
- `RGB LED strips: an overview`_
- An excellent `blog post on WS2812 timing`_.
.. _WS2812 datasheet: https://cdn-shop.adafruit.com/datasheets/WS2812.pdf
.. _LPD8806 datasheet: https://cdn-shop.adafruit.com/datasheets/lpd8806+english.pdf
.. _APA102C datasheet: https://cdn-shop.adafruit.com/product-files/2477/APA102C-iPixelLED.pdf
.. _blog post on WS2812 timing: https://wp.josh.com/2014/05/13/ws2812-neopixels-are-not-so-finicky-once-you-get-to-know-them/
.. _RGB LED strips\: an overview: http://nut-bolt.nl/2012/rgb-led-strips/
216a1d95ed