zephyr/samples/basic/fade_led
Tim Lovett 216a1d95ed boards: seeed: Add xiao_rp2040 board
Adds xiao_rp2040 board built off rpi_pico
Currently only uf2 flash supported

Signed-off-by: Tim Lovett <timo614@gmail.com>
2024-06-12 17:10:04 -05:00
..
boards boards: seeed: Add xiao_rp2040 board 2024-06-12 17:10:04 -05:00
src samples: basic: fade_led: add testing base on console output 2024-06-05 04:24:22 -07:00
CMakeLists.txt cmake: increase minimal required version to 3.20.0 2021-08-20 09:47:34 +02:00
prj.conf driver: pwm: use new logger 2018-10-08 17:49:12 -04:00
README.rst hwmv2: Introduce Hardware model version 2 and convert devices 2024-03-02 16:56:33 -05:00
sample.yaml samples: basic: fade_led: add testing base on console output 2024-06-05 04:24:22 -07:00

.. zephyr:code-sample:: fade-led
   :name: Fade LED
   :relevant-api: pwm_interface

   Fade an LED using the PWM API.

Overview
********

This application "fades" a LED using the :ref:`PWM API <pwm_api>`.

The LED starts off increases its brightness until it is fully or nearly fully
on. The brightness then decreases until the LED is off, completing on fade
cycle. Each cycle takes 2.5 seconds, and the cycles repeat forever. The PWM
period is taken from Devicetree. It should be fast enough to be above the
flicker fusion threshold.

Requirements and Wiring
***********************

This sample has the same requirements and wiring considerations as the
:zephyr:code-sample:`pwm-blinky` sample.

Building and Running
********************

To build and flash this sample for the :ref:`nrf52840dk_nrf52840`:

.. zephyr-app-commands::
   :zephyr-app: samples/basic/fade_led
   :board: nrf52840dk/nrf52840
   :goals: build flash
   :compact:

Change ``nrf52840dk/nrf52840`` appropriately for other supported boards.

After flashing, the sample starts fading the LED as described above. It also
prints information to the board's console.