355 lines
11 KiB
C
355 lines
11 KiB
C
/*
|
|
* Copyright (c) 2024 ENE Technology Inc.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT ene_kb1200_i2c
|
|
|
|
#include <zephyr/kernel.h>
|
|
#include <zephyr/drivers/i2c.h>
|
|
#include <zephyr/drivers/pinctrl.h>
|
|
#include <errno.h>
|
|
#include <reg/fsmbm.h>
|
|
|
|
struct i2c_kb1200_config {
|
|
struct fsmbm_regs *fsmbm;
|
|
const struct pinctrl_dev_config *pcfg;
|
|
};
|
|
|
|
struct i2c_kb1200_data {
|
|
struct k_sem mutex;
|
|
volatile uint8_t *msg_buf;
|
|
volatile uint32_t msg_len;
|
|
volatile uint8_t msg_flags;
|
|
volatile int state;
|
|
volatile uint32_t index;
|
|
volatile int err_code;
|
|
};
|
|
|
|
/* I2C Master local functions */
|
|
static void i2c_kb1200_isr(const struct device *dev)
|
|
{
|
|
const struct i2c_kb1200_config *config = dev->config;
|
|
struct i2c_kb1200_data *data = dev->data;
|
|
|
|
if (data->state == STATE_SENDING) {
|
|
if (config->fsmbm->FSMBMPF & FSMBM_BLOCK_FINISH_EVENT) {
|
|
/* continue block */
|
|
uint32_t remain = data->msg_len - data->index;
|
|
uint32_t send_bytes =
|
|
remain > FSMBM_BUFFER_SIZE ? FSMBM_BUFFER_SIZE : remain;
|
|
memcpy((void *)&config->fsmbm->FSMBMDAT[0],
|
|
(void *)&data->msg_buf[data->index], send_bytes);
|
|
data->index += send_bytes;
|
|
/* Increase CNT setting let hw can't match counter */
|
|
config->fsmbm->FSMBMPRTC_C += send_bytes;
|
|
/* If it was the last protocol recover the correct length value*/
|
|
if (data->msg_len == data->index) {
|
|
config->fsmbm->FSMBMPRTC_C -= 1;
|
|
}
|
|
config->fsmbm->FSMBMPF = FSMBM_BLOCK_FINISH_EVENT;
|
|
} else if (config->fsmbm->FSMBMPF & FSMBM_COMPLETE_EVENT) {
|
|
/* complete */
|
|
if (((config->fsmbm->FSMBMSTS & FSMBM_STS_MASK) == FSMBM_SMBUS_BUSY) &&
|
|
((config->fsmbm->FSMBMFRT & ___STOP) == ___NONE)) {
|
|
/* while packet finish without STOP, the error message is
|
|
* FSMBM_SMBUS_BUSY
|
|
*/
|
|
data->err_code = 0;
|
|
} else {
|
|
data->err_code = config->fsmbm->FSMBMSTS & FSMBM_STS_MASK;
|
|
}
|
|
data->state = STATE_COMPLETE;
|
|
config->fsmbm->FSMBMPF = FSMBM_COMPLETE_EVENT;
|
|
} else {
|
|
data->err_code = config->fsmbm->FSMBMSTS & FSMBM_STS_MASK;
|
|
data->state = STATE_COMPLETE;
|
|
}
|
|
} else if (data->state == STATE_RECEIVING) {
|
|
uint32_t remain = data->msg_len - data->index;
|
|
uint32_t receive_bytes = (remain > FSMBM_BUFFER_SIZE) ? FSMBM_BUFFER_SIZE : remain;
|
|
|
|
memcpy((void *)&data->msg_buf[data->index], (void *)&config->fsmbm->FSMBMDAT[0],
|
|
receive_bytes);
|
|
data->index += receive_bytes;
|
|
if (config->fsmbm->FSMBMPF & FSMBM_BLOCK_FINISH_EVENT) {
|
|
/* continue block */
|
|
/* Check next protocl information */
|
|
remain = data->msg_len - data->index;
|
|
uint32_t NextLen =
|
|
(remain > FSMBM_BUFFER_SIZE) ? FSMBM_BUFFER_SIZE : remain;
|
|
/* Increase CNT setting let hw can't match counter */
|
|
config->fsmbm->FSMBMPRTC_C += NextLen;
|
|
/* If it was the last protocol recover the correct length value */
|
|
if (data->msg_len == (data->index + NextLen)) {
|
|
config->fsmbm->FSMBMPRTC_C -= 1;
|
|
}
|
|
config->fsmbm->FSMBMPF = FSMBM_BLOCK_FINISH_EVENT;
|
|
} else if (config->fsmbm->FSMBMPF & FSMBM_COMPLETE_EVENT) {
|
|
/* complete */
|
|
if (((config->fsmbm->FSMBMSTS & FSMBM_STS_MASK) == FSMBM_SMBUS_BUSY) &&
|
|
((config->fsmbm->FSMBMFRT & ___STOP) == ___NONE)) {
|
|
/* while packet finish without STOP, the error message is
|
|
* FSMBM_SMBUS_BUSY
|
|
*/
|
|
data->err_code = 0;
|
|
} else {
|
|
data->err_code = config->fsmbm->FSMBMSTS & FSMBM_STS_MASK;
|
|
}
|
|
data->state = STATE_COMPLETE;
|
|
config->fsmbm->FSMBMPF = FSMBM_COMPLETE_EVENT;
|
|
} else {
|
|
data->err_code = config->fsmbm->FSMBMSTS & FSMBM_STS_MASK;
|
|
data->state = STATE_COMPLETE;
|
|
}
|
|
} else if (data->state == STATE_COMPLETE) {
|
|
config->fsmbm->FSMBMPF = (FSMBM_COMPLETE_EVENT | FSMBM_BLOCK_FINISH_EVENT);
|
|
}
|
|
}
|
|
|
|
static int i2c_kb1200_poll_write(const struct device *dev, struct i2c_msg msg, uint16_t addr)
|
|
{
|
|
const struct i2c_kb1200_config *config = dev->config;
|
|
struct i2c_kb1200_data *data = dev->data;
|
|
uint8_t send_bytes;
|
|
|
|
if (msg.flags & I2C_MSG_STOP) {
|
|
/* No CMD, No CNT, No PEC, with STOP*/
|
|
config->fsmbm->FSMBMFRT = ___STOP;
|
|
} else {
|
|
/* No CMD, No CNT, No PEC, no STOP*/
|
|
config->fsmbm->FSMBMFRT = ___NONE;
|
|
}
|
|
data->msg_len = msg.len;
|
|
data->msg_buf = msg.buf;
|
|
data->msg_flags = msg.flags;
|
|
data->state = STATE_IDLE;
|
|
data->index = 0;
|
|
data->err_code = 0;
|
|
|
|
send_bytes = (msg.len > FSMBM_BUFFER_SIZE) ? FSMBM_BUFFER_SIZE : msg.len;
|
|
memcpy((void *)&config->fsmbm->FSMBMDAT[0], (void *)&data->msg_buf[data->index],
|
|
send_bytes);
|
|
data->index += send_bytes;
|
|
data->state = STATE_SENDING;
|
|
|
|
config->fsmbm->FSMBMCMD = 0;
|
|
config->fsmbm->FSMBMADR = (addr & ~BIT(0)) | FSMBM_WRITE;
|
|
config->fsmbm->FSMBMPF = (FSMBM_COMPLETE_EVENT | FSMBM_BLOCK_FINISH_EVENT);
|
|
/* If data over bufferSize increase 1 to force continue transmit */
|
|
if (msg.len >= (FSMBM_BUFFER_SIZE + 1)) {
|
|
config->fsmbm->FSMBMPRTC_C = FSMBM_BUFFER_SIZE + 1;
|
|
} else {
|
|
config->fsmbm->FSMBMPRTC_C = send_bytes;
|
|
}
|
|
config->fsmbm->FSMBMIE = (FSMBM_COMPLETE_EVENT | FSMBM_BLOCK_FINISH_EVENT);
|
|
config->fsmbm->FSMBMPRTC_P = FLEXIBLE_PROTOCOL;
|
|
while (data->state != STATE_COMPLETE)
|
|
;
|
|
data->state = STATE_IDLE;
|
|
if (data->err_code != 0) {
|
|
/* reset HW */
|
|
config->fsmbm->FSMBMCFG |= FSMBM_HW_RESET;
|
|
return data->err_code;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_kb1200_poll_read(const struct device *dev, struct i2c_msg msg, uint16_t addr)
|
|
{
|
|
const struct i2c_kb1200_config *config = dev->config;
|
|
struct i2c_kb1200_data *data = dev->data;
|
|
|
|
if (msg.flags & I2C_MSG_STOP) {
|
|
/* No CMD, No CNT, No PEC, with STOP*/
|
|
config->fsmbm->FSMBMFRT = ___STOP;
|
|
} else {
|
|
/* No CMD, No CNT, No PEC, no STOP*/
|
|
config->fsmbm->FSMBMFRT = ___NONE;
|
|
}
|
|
data->msg_len = msg.len;
|
|
data->msg_buf = msg.buf;
|
|
data->msg_flags = msg.flags;
|
|
data->state = STATE_IDLE;
|
|
data->index = 0;
|
|
data->err_code = 0;
|
|
data->state = STATE_RECEIVING;
|
|
|
|
config->fsmbm->FSMBMCMD = 0;
|
|
config->fsmbm->FSMBMADR = (addr & ~BIT(0)) | FSMBM_READ;
|
|
config->fsmbm->FSMBMPF = (FSMBM_COMPLETE_EVENT | FSMBM_BLOCK_FINISH_EVENT);
|
|
/* If data over bufferSize increase 1 to force continue receive */
|
|
if (msg.len >= (FSMBM_BUFFER_SIZE + 1)) {
|
|
config->fsmbm->FSMBMPRTC_C = FSMBM_BUFFER_SIZE + 1;
|
|
} else {
|
|
config->fsmbm->FSMBMPRTC_C = msg.len;
|
|
}
|
|
config->fsmbm->FSMBMIE = (FSMBM_COMPLETE_EVENT | FSMBM_BLOCK_FINISH_EVENT);
|
|
config->fsmbm->FSMBMPRTC_P = FLEXIBLE_PROTOCOL;
|
|
while (data->state != STATE_COMPLETE)
|
|
;
|
|
data->state = STATE_IDLE;
|
|
if (data->err_code != 0) {
|
|
/* reset HW */
|
|
config->fsmbm->FSMBMCFG |= FSMBM_HW_RESET;
|
|
return data->err_code;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* I2C Master api functions */
|
|
static int i2c_kb1200_configure(const struct device *dev, uint32_t dev_config)
|
|
{
|
|
const struct i2c_kb1200_config *config = dev->config;
|
|
|
|
if (!(dev_config & I2C_MODE_CONTROLLER)) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if (dev_config & I2C_ADDR_10_BITS) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
uint32_t speed = I2C_SPEED_GET(dev_config);
|
|
|
|
switch (speed) {
|
|
case I2C_SPEED_STANDARD:
|
|
config->fsmbm->FSMBMCFG = (FSMBM_CLK_100K << FSMBM_CLK_POS);
|
|
break;
|
|
case I2C_SPEED_FAST:
|
|
config->fsmbm->FSMBMCFG = (FSMBM_CLK_400K << FSMBM_CLK_POS);
|
|
break;
|
|
case I2C_SPEED_FAST_PLUS:
|
|
config->fsmbm->FSMBMCFG = (FSMBM_CLK_1M << FSMBM_CLK_POS);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
config->fsmbm->FSMBMPF = (FSMBM_COMPLETE_EVENT | FSMBM_BLOCK_FINISH_EVENT);
|
|
config->fsmbm->FSMBMIE = (FSMBM_COMPLETE_EVENT | FSMBM_BLOCK_FINISH_EVENT);
|
|
/* HW reset, Enable FSMBM function, Timeout function*/
|
|
config->fsmbm->FSMBMCFG |= FSMBM_HW_RESET | FSMBM_TIMEOUT_ENABLE | FSMBM_FUNCTION_ENABLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_kb1200_get_config(const struct device *dev, uint32_t *dev_config)
|
|
{
|
|
const struct i2c_kb1200_config *config = dev->config;
|
|
|
|
if ((config->fsmbm->FSMBMCFG & FSMBM_FUNCTION_ENABLE) == 0x00) {
|
|
printk("Cannot find i2c controller on 0x%p!\n", config->fsmbm);
|
|
return -EIO;
|
|
}
|
|
|
|
switch ((config->fsmbm->FSMBMCFG >> FSMBM_CLK_POS) & FSMBM_CLK_MASK) {
|
|
case FSMBM_CLK_100K:
|
|
*dev_config = I2C_MODE_CONTROLLER | I2C_SPEED_SET(I2C_SPEED_STANDARD);
|
|
break;
|
|
case FSMBM_CLK_400K:
|
|
*dev_config = I2C_MODE_CONTROLLER | I2C_SPEED_SET(I2C_SPEED_FAST);
|
|
break;
|
|
case FSMBM_CLK_1M:
|
|
*dev_config = I2C_MODE_CONTROLLER | I2C_SPEED_SET(I2C_SPEED_FAST_PLUS);
|
|
break;
|
|
default:
|
|
return -ERANGE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_kb1200_transfer(const struct device *dev, struct i2c_msg *msgs, uint8_t num_msgs,
|
|
uint16_t addr)
|
|
{
|
|
struct i2c_kb1200_data *data = dev->data;
|
|
int ret;
|
|
|
|
/* get the mutex */
|
|
k_sem_take(&data->mutex, K_FOREVER);
|
|
for (int i = 0U; i < num_msgs; i++) {
|
|
if ((msgs[i].flags & I2C_MSG_RW_MASK) == I2C_MSG_WRITE) {
|
|
ret = i2c_kb1200_poll_write(dev, msgs[i], addr);
|
|
if (ret) {
|
|
printk("%s Write error: 0x%X\n", dev->name, ret);
|
|
break;
|
|
}
|
|
} else {
|
|
ret = i2c_kb1200_poll_read(dev, msgs[i], addr);
|
|
if (ret) {
|
|
printk("%s Read error: 0x%X\n", dev->name, ret);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
/* release the mutex */
|
|
k_sem_give(&data->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* I2C Master driver registration */
|
|
static const struct i2c_driver_api i2c_kb1200_api = {
|
|
.configure = i2c_kb1200_configure,
|
|
.get_config = i2c_kb1200_get_config,
|
|
.transfer = i2c_kb1200_transfer,
|
|
};
|
|
|
|
#define KB1200_FSMBM_DEV(inst) DEVICE_DT_INST_GET(inst),
|
|
static const struct device *const fsmbm_devices[] = {DT_INST_FOREACH_STATUS_OKAY(KB1200_FSMBM_DEV)};
|
|
static void i2c_kb1200_isr_wrap(void)
|
|
{
|
|
for (size_t i = 0; i < ARRAY_SIZE(fsmbm_devices); i++) {
|
|
const struct device *dev_ = fsmbm_devices[i];
|
|
const struct i2c_kb1200_config *config = dev_->config;
|
|
|
|
if (config->fsmbm->FSMBMIE & config->fsmbm->FSMBMPF) {
|
|
i2c_kb1200_isr(dev_);
|
|
}
|
|
}
|
|
}
|
|
|
|
static bool init_irq = true;
|
|
static void kb1200_fsmbm_irq_init(void)
|
|
{
|
|
if (init_irq) {
|
|
init_irq = false;
|
|
IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority), i2c_kb1200_isr_wrap, NULL,
|
|
0);
|
|
irq_enable(DT_INST_IRQN(0));
|
|
}
|
|
}
|
|
|
|
static int i2c_kb1200_init(const struct device *dev)
|
|
{
|
|
int ret;
|
|
const struct i2c_kb1200_config *config = dev->config;
|
|
struct i2c_kb1200_data *data = dev->data;
|
|
|
|
ret = pinctrl_apply_state(config->pcfg, PINCTRL_STATE_DEFAULT);
|
|
if (ret != 0) {
|
|
return ret;
|
|
}
|
|
|
|
/* init mutex */
|
|
k_sem_init(&data->mutex, 1, 1);
|
|
kb1200_fsmbm_irq_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define I2C_KB1200_DEVICE(inst) \
|
|
PINCTRL_DT_INST_DEFINE(inst); \
|
|
static struct i2c_kb1200_data i2c_kb1200_data_##inst; \
|
|
static const struct i2c_kb1200_config i2c_kb1200_config_##inst = { \
|
|
.fsmbm = (struct fsmbm_regs *)DT_INST_REG_ADDR(inst), \
|
|
.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(inst), \
|
|
}; \
|
|
DEVICE_DT_INST_DEFINE(inst, &i2c_kb1200_init, NULL, &i2c_kb1200_data_##inst, \
|
|
&i2c_kb1200_config_##inst, PRE_KERNEL_1, \
|
|
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, &i2c_kb1200_api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(I2C_KB1200_DEVICE)
|