# LPC LPC55XXX Series

# Copyright 2019, 2023 NXP
# SPDX-License-Identifier: Apache-2.0

choice
	prompt "LPC5500 Series MCU Selection"
	depends on SOC_SERIES_LPC55XXX

config SOC_LPC55S06
	bool "SOC_LPC55S06 M33"
	select CPU_CORTEX_M33
	select CPU_HAS_ARM_SAU
	select CPU_HAS_ARM_MPU
	select CPU_HAS_FPU
	select ARMV8_M_DSP
	select ARM_TRUSTZONE_M
	select CLOCK_CONTROL
	select HAS_MCUX_IAP if !TRUSTED_EXECUTION_NONSECURE
	select HAS_MCUX_RNG

config SOC_LPC55S16
	bool "SOC_LPC55S16 M33"
	select CPU_CORTEX_M33
	select CPU_HAS_ARM_SAU
	select CPU_HAS_ARM_MPU
	select CPU_HAS_FPU
	select ARMV8_M_DSP
	select ARM_TRUSTZONE_M
	select CLOCK_CONTROL
	select HAS_MCUX_IAP if !TRUSTED_EXECUTION_NONSECURE
	select HAS_MCUX_MCAN
	select HAS_MCUX_RNG

config SOC_LPC55S28
	bool "SOC_LPC55S28 M33"
	select CPU_CORTEX_M33
	select CPU_HAS_ARM_MPU
	select CPU_HAS_FPU
	select ARMV8_M_DSP
	select CLOCK_CONTROL
	select HAS_MCUX_IAP
	select HAS_MCUX_LPADC
	select HAS_MCUX_LPC_DMA
	select HAS_MCUX_RNG

config SOC_LPC55S36
	bool "SOC_LPC55S36 M33"
	select CPU_CORTEX_M33
	select CPU_HAS_ARM_SAU
	select CPU_HAS_ARM_MPU
	select CPU_HAS_FPU
	select ARMV8_M_DSP
	select ARM_TRUSTZONE_M
	select CLOCK_CONTROL
	select HAS_MCUX_MCAN
	select HAS_MCUX_PWM

config SOC_LPC55S69_CPU0
	bool "SOC_LPC55S69 M33 [CPU 0]"
	select CPU_CORTEX_M33
	select CPU_HAS_ARM_SAU
	select CPU_HAS_ARM_MPU
	select CPU_HAS_FPU
	select ARMV8_M_DSP
	select ARM_TRUSTZONE_M
	select CLOCK_CONTROL
	select HAS_MCUX_IAP
	select HAS_MCUX_LPADC
	select HAS_MCUX_LPC_DMA
	select HAS_MCUX_USB_LPCIP3511
	select HAS_MCUX_CTIMER
	select HAS_MCUX_SCTIMER
	select HAS_MCUX_RNG

config SOC_LPC55S69_CPU1
	bool "SOC_LPC55S69 M33 [CPU 1]"
	select CPU_CORTEX_M33

endchoice

if SOC_SERIES_LPC55XXX

config SOC_PART_NUMBER_LPC55S06JBD64
	bool

config SOC_PART_NUMBER_LPC55S16JBD64
	bool

config SOC_PART_NUMBER_LPC55S16JBD100
	bool

config SOC_PART_NUMBER_LPC55S28JBD100
	bool

config SOC_PART_NUMBER_LPC55S36JBD100
	bool

config SOC_PART_NUMBER_LPC55S69JBD100
	bool

config SOC_PART_NUMBER_LPC55S69JET98
	bool

config SOC_PART_NUMBER_LPC55XXX
	string
	default "LPC55S06JBD64"  if SOC_PART_NUMBER_LPC55S06JBD64
	default "LPC55S16JBD64" if SOC_PART_NUMBER_LPC55S16JBD64
	default "LPC55S16JBD100" if SOC_PART_NUMBER_LPC55S16JBD100
	default "LPC55S28JBD100" if SOC_PART_NUMBER_LPC55S28JBD100
	default "LPC55S36JBD100" if SOC_PART_NUMBER_LPC55S36JBD100
	default "LPC55S69JBD100" if SOC_PART_NUMBER_LPC55S69JBD100
	default "LPC55S69JET98"  if SOC_PART_NUMBER_LPC55S69JET98

	help
	  This string holds the full part number of the SoC. It is a hidden
	  option that you should not set directly. The part number selection
	  choice defines the default value for this string.

config INIT_PLL0
	bool "Initialize PLL0"

config INIT_PLL1
	bool "Initialize PLL1"
	default "y"
	depends on !(SOC_LPC55S06 || FLASH)
	help
	  In the LPC55XXX Family, this is currently being used to set the
	  core clock value at it's highest frequency which clocks at 150MHz.
	  Note that flash programming operations are limited to 100MHz, and
	  this PLL should not be used as the core clock in those cases.

config SECOND_CORE_MCUX
	bool "LPC55xxx's second core"
	depends on HAS_MCUX
	help
	  Indicates the second core will be enabled, and the part will run
	  in dual core mode.

# Workaround for not being able to have commas in macro arguments
DT_CHOSEN_Z_CODE_CPU1_PARTITION := zephyr,code-cpu1-partition

config SECOND_CORE_BOOT_ADDRESS_MCUX
	depends on SECOND_CORE_MCUX
	hex "Address the second core will boot at"
	default $(dt_chosen_reg_addr_hex,$(DT_CHOSEN_Z_CODE_CPU1_PARTITION))
	help
	  This is the address the second core will boot from.

# Move the LMA for the second core image to be in the flash region of primary
# core, so that JLink flash will load it correctly.
config BUILD_OUTPUT_ADJUST_LMA
	depends on SECOND_CORE_MCUX && SOC_LPC55S69_CPU1
	default "0x10000000"

config LPC55XXX_SRAM_CLOCKS
	bool "CLock LPC SRAM banks"
	default y
	help
	  SRAM controllers 1,2,3, and 4 are disabled at reset.
	  By default, CMSIS SystemInit will enable the clock to these RAM banks.
	  Disable this Kconfig to leave the ram banks untouched out of reset.

config LPC55XXX_USB_RAM
	bool
	default y
	help
	  Some SoC's in the LPC5500 Series do have a dedicated USB RAM.
	  By default, USB RAM is assumed to be present.
	  Disable this Kconfig in case there is no dedicated USB RAM.

endif # SOC_SERIES_LPC55XXX