/* * Copyright (c) 2018 STMicroelectronics * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include #include / { model = "Tocoding Argonkey 96boards"; compatible = "tocoding,argonkey"; chosen { zephyr,console = &usart1; zephyr,shell-uart = &usart1; zephyr,sram = &sram0; zephyr,flash = &flash0; }; leds { compatible = "gpio-leds"; green_led_0: led_0 { gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>; label = "USR0 LED"; }; green_led_1: led_1 { gpios = <&gpiob 2 GPIO_ACTIVE_HIGH>; label = "USR1 LED"; }; }; gpio_keys { compatible = "gpio-keys"; user_button: button { label = "User"; gpios = <&gpioa 2 GPIO_ACTIVE_LOW>; }; }; aliases { led0 = &green_led_0; led1 = &green_led_1; sw0 = &user_button; }; }; &usart1 { pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pa10>; current-speed = <115200>; status = "okay"; }; &spi1_nss_pa4 { slew-rate = "very-high-speed"; }; &spi1 { pinctrl-0 = <&spi1_nss_pa4 &spi1_sck_pa5 &spi1_miso_pa6 &spi1_mosi_pa7>; status = "okay"; }; &spi2_nss_pb12 { slew-rate = "very-high-speed"; }; &spi2 { pinctrl-0 = <&spi2_nss_pb12 &spi2_sck_pb13 &spi2_miso_pb14 &spi2_mosi_pb15>; status = "okay"; /* ST Microelectronics LSM6DSL accel/gyro sensor */ lsm6dsl@1 { compatible = "st,lsm6dsl"; reg = <1>; spi-max-frequency = <1000000>; irq-gpios = <&gpiob 1 GPIO_ACTIVE_HIGH>; label = "LSM6DSL_SPI"; }; }; &dma2 { status = "okay"; }; &i2s5 { status = "okay"; pinctrl-0 = <&i2s5_ck_pb0 &i2s5_sd_pb8>; mp34dt05@0 { compatible = "st,mpxxdtyy"; reg = <0>; label = "MP34DT05"; }; }; &i2c1 { pinctrl-0 = <&i2c1_scl_pb6 &i2c1_sda_pb7>; status = "okay"; clock-frequency = ; }; &i2c2 { pinctrl-0 = <&i2c2_scl_pb10 &i2c2_sda_pb9>; status = "okay"; clock-frequency = ; hts221@5f { compatible = "st,hts221"; reg = <0x5f>; label = "HTS221"; drdy-gpios = <&gpioa 2 GPIO_ACTIVE_HIGH>; }; lps22hb-press@5d { compatible = "st,lps22hb-press"; reg = <0x5d>; label = "LPS22HB"; }; vl53l0x@29 { compatible = "st,vl53l0x"; reg = <0x29>; label = "VL53L0X"; }; }; &i2c3 { pinctrl-0 = <&i2c3_scl_pa8 &i2c3_sda_pb4>; status = "okay"; clock-frequency = ; lp3943@60 { compatible = "ti,lp3943"; reg = <0x60>; label = "LP3943"; }; }; &rtc { status = "okay"; };