/* * Copyright (c) 2020 Intel Corporation * * SPDX-License-Identifier: Apache-2.0 */ #ifndef ZEPHYR_INCLUDE_SYS_MEM_MANAGE_H #define ZEPHYR_INCLUDE_SYS_MEM_MANAGE_H #include /* * Caching mode definitions. These are mutually exclusive. */ /** No caching. Most drivers want this. */ #define K_MEM_CACHE_NONE 2 /** Write-through caching. Used by certain drivers. */ #define K_MEM_CACHE_WT 1 /** Full write-back caching. Any RAM mapped wants this. */ #define K_MEM_CACHE_WB 0 /** Reserved bits for cache modes in k_map() flags argument */ #define K_MEM_CACHE_MASK (BIT(3) - 1) /* * Region permission attributes. Default is read-only, no user, no exec */ /** Region will have read/write access (and not read-only) */ #define K_MEM_PERM_RW BIT(3) /** Region will be executable (normally forbidden) */ #define K_MEM_PERM_EXEC BIT(4) /** Region will be accessible to user mode (normally supervisor-only) */ #define K_MEM_PERM_USER BIT(5) /* * This is the offset to subtract from a virtual address mapped in the * kernel's permanent mapping of RAM, to obtain its physical address. * * virt_addr = phys_addr + Z_MEM_VM_OFFSET * * This only works for virtual addresses within the interval * [CONFIG_KERNEL_VM_BASE, CONFIG_KERNEL_VM_BASE + (CONFIG_SRAM_SIZE * 1024)). * * These macros are intended for assembly, linker code, and static initializers. * Use with care. * * Note that when demand paging is active, these will only work with page * frames that are pinned to their virtual mapping at boot. * * TODO: This will likely need to move to an arch API or need additional * constraints defined. */ #ifdef CONFIG_MMU #define Z_MEM_VM_OFFSET ((CONFIG_KERNEL_VM_BASE + CONFIG_KERNEL_VM_OFFSET) - \ (CONFIG_SRAM_BASE_ADDRESS + CONFIG_SRAM_OFFSET)) #else #define Z_MEM_VM_OFFSET 0 #endif #define Z_MEM_PHYS_ADDR(virt) ((virt) - Z_MEM_VM_OFFSET) #define Z_MEM_VIRT_ADDR(phys) ((phys) + Z_MEM_VM_OFFSET) #if Z_MEM_VM_OFFSET != 0 #define Z_VM_KERNEL 1 #ifdef CONFIG_XIP #error "XIP and a virtual memory kernel are not allowed" #endif #endif #ifndef _ASMLANGUAGE #include #include #include #include struct k_mem_paging_stats_t { #ifdef CONFIG_DEMAND_PAGING_STATS struct { /** Number of page faults */ unsigned long cnt; /** Number of page faults with IRQ locked */ unsigned long irq_locked; /** Number of page faults with IRQ unlocked */ unsigned long irq_unlocked; #ifndef CONFIG_DEMAND_PAGING_ALLOW_IRQ /** Number of page faults while in ISR */ unsigned long in_isr; #endif } pagefaults; struct { /** Number of clean pages selected for eviction */ unsigned long clean; /** Number of dirty pages selected for eviction */ unsigned long dirty; } eviction; #endif /* CONFIG_DEMAND_PAGING_STATS */ }; /* Just like Z_MEM_PHYS_ADDR() but with type safety and assertions */ static inline uintptr_t z_mem_phys_addr(void *virt) { uintptr_t addr = (uintptr_t)virt; #ifdef CONFIG_MMU __ASSERT((addr >= CONFIG_KERNEL_VM_BASE) && (addr < (CONFIG_KERNEL_VM_BASE + (CONFIG_KERNEL_VM_SIZE))), "address %p not in permanent mappings", virt); #else /* Should be identity-mapped */ __ASSERT((addr >= CONFIG_SRAM_BASE_ADDRESS) && (addr < (CONFIG_SRAM_BASE_ADDRESS + (CONFIG_SRAM_SIZE * 1024UL))), "physical address 0x%lx not in RAM", (unsigned long)addr); #endif /* CONFIG_MMU */ /* TODO add assertion that this page is pinned to boot mapping, * the above checks won't be sufficient with demand paging */ return Z_MEM_PHYS_ADDR(addr); } /* Just like Z_MEM_VIRT_ADDR() but with type safety and assertions */ static inline void *z_mem_virt_addr(uintptr_t phys) { __ASSERT((phys >= CONFIG_SRAM_BASE_ADDRESS) && (phys < (CONFIG_SRAM_BASE_ADDRESS + (CONFIG_SRAM_SIZE * 1024UL))), "physical address 0x%lx not in RAM", (unsigned long)phys); /* TODO add assertion that this page frame is pinned to boot mapping, * the above check won't be sufficient with demand paging */ return (void *)Z_MEM_VIRT_ADDR(phys); } #ifdef __cplusplus extern "C" { #endif /** * Map a physical memory region into the kernel's virtual address space * * This function is intended for mapping memory-mapped I/O regions into * the virtual address space. Given a physical address and a size, return a * linear address representing the base of where the physical region is mapped * in the virtual address space for the Zephyr kernel. * * This function alters the active page tables in the area reserved * for the kernel. This function will choose the virtual address * and return it to the caller. * * Portable code should never assume that phys_addr and linear_addr will * be equal. * * Once created, mappings are permanent. * * Caching and access properties are controlled by the 'flags' parameter. * Unused bits in 'flags' are reserved for future expansion. * A caching mode must be selected. By default, the region is read-only * with user access and code execution forbidden. This policy is changed * by passing K_MEM_CACHE_* and K_MEM_PERM_* macros into the 'flags' parameter. * * If there is insufficient virtual address space for the mapping this will * generate a kernel panic. * * This API is only available if CONFIG_MMU is enabled. * * It is highly discouraged to use this function to map system RAM page * frames. It may conflict with anonymous memory mappings and demand paging * and produce undefined behavior. Do not use this for RAM unless you know * exactly what you are doing. If you need a chunk of memory, use k_mem_map(). * If you need a contiguous buffer of physical memory, statically declare it * and pin it at build time, it will be mapped when the system boots. * * This API is part of infrastructure still under development and may * change. * * @param virt [out] Output virtual address storage location * @param phys Physical address base of the memory region * @param size Size of the memory region * @param flags Caching mode and access flags, see K_MAP_* macros */ void z_phys_map(uint8_t **virt_ptr, uintptr_t phys, size_t size, uint32_t flags); /* * k_mem_map() control flags */ /** * @def K_MEM_MAP_UNINIT * * @brief The mapped region is not guaranteed to be zeroed. * * This may improve performance. The associated page frames may contain * indeterminate data, zeroes, or even sensitive information. * * This may not be used with K_MEM_PERM_USER as there are no circumstances * where this is safe. */ #define K_MEM_MAP_UNINIT BIT(16) /** * @def K_MEM_MAP_LOCK * * Region will be pinned in memory and never paged * * Such memory is guaranteed to never produce a page fault due to page-outs * or copy-on-write once the mapping call has returned. Physical page frames * will be pre-fetched as necessary and pinned. */ #define K_MEM_MAP_LOCK BIT(17) /** * @def K_MEM_MAP_GUARD * * A un-mapped virtual guard page will be placed in memory immediately preceding * the mapped region. This page will still be noted as being used by the * virtual memory manager. The total size of the allocation will be the * requested size plus the size of this guard page. The returned address * pointer will not include the guard page immediately below it. The typical * use-case is downward-growing thread stacks. * * Zephyr treats page faults on this guard page as a fatal K_ERR_STACK_CHK_FAIL * if it determines it immediately precedes a stack buffer, this is * implemented in the architecture layer. */ #define K_MEM_MAP_GUARD BIT(18) /** * Return the amount of free memory available * * The returned value will reflect how many free RAM page frames are available. * If demand paging is enabled, it may still be possible to allocate more. * * The information reported by this function may go stale immediately if * concurrent memory mappings or page-ins take place. * * @return Free physical RAM, in bytes */ size_t k_mem_free_get(void); /** * Map anonymous memory into Zephyr's address space * * This function effectively increases the data space available to Zephyr. * The kernel will choose a base virtual address and return it to the caller. * The memory will have access permissions for all contexts set per the * provided flags argument. * * If user thread access control needs to be managed in any way, do not enable * K_MEM_PERM_USER flags here; instead manage the region's permissions * with memory domain APIs after the mapping has been established. Setting * K_MEM_PERM_USER here will allow all user threads to access this memory * which is usually undesirable. * * Unless K_MEM_MAP_UNINIT is used, the returned memory will be zeroed. * * The mapped region is not guaranteed to be physically contiguous in memory. * Physically contiguous buffers should be allocated statically and pinned * at build time. * * Pages mapped in this way have write-back cache settings. * * The returned virtual memory pointer will be page-aligned. The size * parameter, and any base address for re-mapping purposes must be page- * aligned. * * Many K_MEM_MAP_* flags have been implemented to alter the behavior of this * function, with details in the documentation for these flags. * * @param size Size of the memory mapping. This must be page-aligned. * @param flags K_MEM_PERM_*, K_MEM_MAP_* control flags. * @return The mapped memory location, or NULL if insufficient virtual address * space, insufficient physical memory to establish the mapping, * or insufficient memory for paging structures. */ void *k_mem_map(size_t size, uint32_t flags); /** * Given an arbitrary region, provide a aligned region that covers it * * The returned region will have both its base address and size aligned * to the provided alignment value. * * @param aligned_addr [out] Aligned address * @param aligned_size [out] Aligned region size * @param addr Region base address * @param size Region size * @param align What to align the address and size to * @retval offset between aligned_addr and addr */ size_t k_mem_region_align(uintptr_t *aligned_addr, size_t *aligned_size, uintptr_t addr, size_t size, size_t align); #ifdef CONFIG_DEMAND_PAGING /** * Evict a page-aligned virtual memory region to the backing store * * Useful if it is known that a memory region will not be used for some time. * All the data pages within the specified region will be evicted to the * backing store if they weren't already, with their associated page frames * marked as available for mappings or page-ins. * * None of the associated page frames mapped to the provided region should * be pinned. * * Note that there are no guarantees how long these pages will be evicted, * they could take page faults immediately. * * If CONFIG_DEMAND_PAGING_ALLOW_IRQ is enabled, this function may not be * called by ISRs as the backing store may be in-use. * * @param addr Base page-aligned virtual address * @param size Page-aligned data region size * @retval 0 Success * @retval -ENOMEM Insufficient space in backing store to satisfy request. * The region may be partially paged out. */ int k_mem_page_out(void *addr, size_t size); /** * Load a virtual data region into memory * * After the function completes, all the page frames associated with this * function will be paged in. However, they are not guaranteed to stay there. * This is useful if the region is known to be used soon. * * If CONFIG_DEMAND_PAGING_ALLOW_IRQ is enabled, this function may not be * called by ISRs as the backing store may be in-use. * * @param addr Base page-aligned virtual address * @param size Page-aligned data region size */ void k_mem_page_in(void *addr, size_t size); /** * Pin an aligned virtual data region, paging in as necessary * * After the function completes, all the page frames associated with this * region will be resident in memory and pinned such that they stay that way. * This is a stronger version of z_mem_page_in(). * * If CONFIG_DEMAND_PAGING_ALLOW_IRQ is enabled, this function may not be * called by ISRs as the backing store may be in-use. * * @param addr Base page-aligned virtual address * @param size Page-aligned data region size */ void k_mem_pin(void *addr, size_t size); /** * Un-pin an aligned virtual data region * * After the function completes, all the page frames associated with this * region will be no longer marked as pinned. This does not evict the region, * follow this with z_mem_page_out() if you need that. * * @param addr Base page-aligned virtual address * @param size Page-aligned data region size */ void k_mem_unpin(void *addr, size_t size); #endif /* CONFIG_DEMAND_PAGING */ #ifdef CONFIG_DEMAND_PAGING_STATS /** * Get the paging statistics since system startup * * This populates the paging statistics struct being passed in * as argument. * * @param[in,out] stats Paging statistics struct to be filled. */ __syscall void k_mem_paging_stats_get(struct k_mem_paging_stats_t *stats); #ifdef CONFIG_DEMAND_PAGING_THREAD_STATS /** * Get the paging statistics since system startup for a thread * * This populates the paging statistics struct being passed in * as argument for a particular thread. * * @param[in] tid Thread ID * @param[in,out] stats Paging statistics struct to be filled. */ __syscall void k_mem_paging_thread_stats_get(k_tid_t tid, struct k_mem_paging_stats_t *stats); #endif /* CONFIG_DEMAND_PAGING_THREAD_STATS */ #include #endif /* CONFIG_DEMAND_PAGING_STATS */ #ifdef __cplusplus } #endif #endif /* !_ASMLANGUAGE */ #endif /* ZEPHYR_INCLUDE_SYS_MEM_MANAGE_H */