/* * Copyright (c) 2019-2021 Vestas Wind Systems A/S * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include #include #include / { model = "NXP Kinetis KE18 MCU Tower System Module"; compatible = "nxp,mke18f16", "nxp,ke18f", "nxp,ke1xf"; aliases { led0 = &orange_led; led1 = &yellow_led; led2 = &green_led; led3 = &red_led; led4 = &tri_red_led; led5 = &tri_green_led; led6 = &tri_blue_led; pwm-led0 = &orange_pwm_led; pwm-led1 = &yellow_pwm_led; pwm-led2 = &green_pwm_led; pwm-led3 = &red_pwm_led; red-pwm-led = &tri_red_pwm_led; green-pwm-led = &tri_green_pwm_led; blue-pwm-led = &tri_blue_pwm_led; sw0 = &user_button_3; sw1 = &user_button_2; }; chosen { zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; zephyr,console = &lpuart0; zephyr,shell-uart = &lpuart0; zephyr,uart-pipe = &lpuart0; zephyr,can-primary = &flexcan0; }; leds { compatible = "gpio-leds"; orange_led: led_0 { gpios = <&gpioc 13 GPIO_ACTIVE_LOW>; label = "User LED D9"; }; yellow_led: led_1 { gpios = <&gpioc 12 GPIO_ACTIVE_LOW>; label = "User LED D8"; }; green_led: led_2 { gpios = <&gpioc 11 GPIO_ACTIVE_LOW>; label = "User LED D7"; }; red_led: led_3 { gpios = <&gpioc 10 GPIO_ACTIVE_LOW>; label = "User LED D6"; }; tri_red_led: led_4 { gpios = <&gpiod 16 GPIO_ACTIVE_LOW>; label = "User Tricolor LED D5 (Red)"; }; tri_green_led: led_5 { gpios = <&gpiod 15 GPIO_ACTIVE_LOW>; label = "User Tricolor LED D5 (Green)"; }; tri_blue_led: led_6 { gpios = <&gpiob 5 GPIO_ACTIVE_LOW>; label = "User Tricolor LED D5 (Blue)"; }; }; pwmleds { compatible = "pwm-leds"; orange_pwm_led: led_pwm_0 { pwms = <&ftm3 7 60000 PWM_POLARITY_INVERTED>; label = "User PWM LED D9"; }; yellow_pwm_led: led_pwm_1 { pwms = <&ftm3 6 60000 PWM_POLARITY_INVERTED>; label = "User PWM LED D8"; }; green_pwm_led: led_pwm_2 { pwms = <&ftm3 5 60000 PWM_POLARITY_INVERTED>; label = "User PWM LED D7"; }; red_pwm_led: led_pwm_3 { pwms = <&ftm3 4 60000 PWM_POLARITY_INVERTED>; label = "User PWM LED D6"; }; tri_red_pwm_led: led_pwm_4 { pwms = <&ftm0 1 60000 PWM_POLARITY_INVERTED>; label = "User Tricolor PWM LED D5 (Red)"; }; tri_green_pwm_led: led_pwm_5 { pwms = <&ftm0 0 60000 PWM_POLARITY_INVERTED>; label = "User Tricolor PWM LED D5 (Green)"; }; tri_blue_pwm_led: led_pwm_6 { pwms = <&ftm0 5 60000 PWM_POLARITY_INVERTED>; label = "User Tricolor PWM LED D5 (Blue)"; }; }; gpio_keys { compatible = "gpio-keys"; user_button_2: button_0 { label = "User SW2"; gpios = <&gpiod 3 GPIO_ACTIVE_LOW>; }; user_button_3: button_1 { label = "User SW3"; gpios = <&gpiod 6 GPIO_ACTIVE_LOW>; }; }; }; &cpu0 { clock-frequency = <120000000>; cpu-power-states = <&idle &stop>; }; &idle { min-residency-us = <1>; }; &stop { min-residency-us = <20000>; exit-latency-us = <13>; }; &sim { clkout-source = <1>; clkout-divider = <0>; pinctrl-0 = <&CLKOUT_PTE10>; pinctrl-names = "default"; }; &scg { sosc-mode = ; sosc_clk { status = "okay"; clock-frequency = <8000000>; }; pll { clock-mult = <30>; }; core_clk { clocks = <&spll_clk>; }; bus_clk { clock-div = <2>; }; slow_clk { clock-div = <5>; }; clkout_clk { status = "okay"; }; splldiv1_clk { clock-div = <1>; }; splldiv2_clk { clock-div = <2>; }; sircdiv1_clk { clock-div = <1>; }; sircdiv2_clk { clock-div = <2>; }; fircdiv1_clk { clock-div = <1>; }; fircdiv2_clk { clock-div = <1>; }; soscdiv1_clk { clock-div = <1>; }; soscdiv2_clk { clock-div = <1>; }; }; &lpuart0 { status = "okay"; current-speed = <115200>; pinctrl-0 = <&LPUART0_RX_PTB0 &LPUART0_TX_PTB1>; pinctrl-names = "default"; }; &ftm0 { status = "okay"; compatible = "nxp,kinetis-ftm-pwm"; #pwm-cells = <3>; pinctrl-0 = <&FTM0_CH0_PTD15 &FTM0_CH1_PTD16 &FTM0_CH5_PTB5>; pinctrl-names = "default"; }; &ftm3 { status = "okay"; compatible = "nxp,kinetis-ftm-pwm"; #pwm-cells = <3>; pinctrl-0 = <&FTM3_CH4_PTC10 &FTM3_CH5_PTC11 &FTM3_CH6_PTC12 &FTM3_CH7_PTC13>; pinctrl-names = "default"; }; &lpi2c0 { status = "okay"; pinctrl-0 = <&LPI2C0_SDA_PTA2 &LPI2C0_SCL_PTA3>; pinctrl-names = "default"; fxos8700: fxos8700@1d { compatible = "nxp,fxos8700"; reg = <0x1d>; label = "FXOS8700"; reset-gpios = <&gpioc 15 GPIO_ACTIVE_HIGH>; }; }; &lpi2c1 { status = "okay"; pinctrl-0 = <&LPI2C1_SDA_PTD8 &LPI2C1_SCL_PTD9>; pinctrl-names = "default"; }; &lpspi0 { status = "okay"; pinctrl-0 = <&LPSPI0_SCK_PTE0 &LPSPI0_SIN_PTE1 &LPSPI0_SOUT_PTE2 &LPSPI0_PCS2_PTE6>; pinctrl-names = "default"; }; &lpspi1 { status = "okay"; pinctrl-0 = <&LPSPI1_SCK_PTD0 &LPSPI1_SIN_PTD1 &LPSPI1_SOUT_PTD2 &LPSPI1_PCS0_PTD3>; pinctrl-names = "default"; }; &dac0 { status = "okay"; pinctrl-0 = <&DAC0_OUT_PTE9>; pinctrl-names = "default"; }; &adc0 { status = "okay"; sample-time = <12>; pinctrl-0 = <&ADC0_SE0_PTA0 &ADC0_SE1_PTA1 &ADC0_SE12_PTC14>; pinctrl-names = "default"; }; &temp0 { status = "okay"; }; &flexcan0 { status = "okay"; bus-speed = <125000>; pinctrl-0 = <&CAN0_RX_PTE4 &CAN0_TX_PTE5>; pinctrl-names = "default"; }; &gpioa { status = "okay"; }; &gpiob { status = "okay"; }; &gpioc { status = "okay"; }; &gpiod { status = "okay"; }; &gpioe { status = "okay"; }; &edma { status = "okay"; }; &flash0 { partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; boot_partition: partition@0 { label = "mcuboot"; reg = <0x00000000 0xc000>; }; slot0_partition: partition@c000 { label = "image-0"; reg = <0x0000c000 0x32000>; }; slot1_partition: partition@3e000 { label = "image-1"; reg = <0x0003e000 0x32000>; }; scratch_partition: partition@70000 { label = "image-scratch"; reg = <0x00070000 0xa000>; }; storage_partition: partition@7a000 { label = "storage"; reg = <0x0007a000 0x00006000>; }; }; };