/* * Copyright (c) 2019 Laird Connectivity * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include / { model = "Laird BL652 DVK"; compatible = "laird,bl652_dvk"; chosen { zephyr,console = &uart0; zephyr,shell-uart = &uart0; zephyr,uart-mcumgr = &uart0; zephyr,bt-mon-uart = &uart0; zephyr,bt-c2h-uart = &uart0; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; }; leds { compatible = "gpio-leds"; led1: led_1 { gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; label = "Blue LED 1"; }; led2: led_2 { gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; label = "Blue LED 2"; }; }; buttons { compatible = "gpio-keys"; button1: button_1 { gpios = <&gpio0 11 GPIO_PULL_UP>; label = "Push button switch 1"; }; button2: button_2 { gpios = <&gpio0 15 GPIO_PULL_UP>; label = "Push button switch 2"; }; }; /* These aliases are provided for compatibility with samples */ aliases { led0 = &led1; led1 = &led2; sw0 = &button1; sw1 = &button2; }; }; &adc { status = "okay"; }; &gpiote { status = "okay"; }; &gpio0 { status = "okay"; }; &uart0 { status = "okay"; compatible = "nordic,nrf-uart"; current-speed = <115200>; tx-pin = <6>; rx-pin = <8>; rts-pin = <5>; cts-pin = <7>; }; &i2c0 { compatible = "nordic,nrf-twi"; status = "okay"; sda-pin = <26>; scl-pin = <27>; dac0: mcp4725@60 { /* MCP4725 not populated at factory */ compatible = "microchip,mcp4725"; reg = <0x60>; label = "MCP4725"; #io-channel-cells = <1>; status = "disabled"; }; }; &pwm0 { status = "okay"; ch0-pin = <17>; }; &spi0 { compatible = "nordic,nrf-spi"; /* Cannot be used together with i2c0. */ /* status = "okay"; */ sck-pin = <25>; mosi-pin = <23>; miso-pin = <24>; cs-gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; }; &spi1 { compatible = "nordic,nrf-spi"; status = "okay"; sck-pin = <16>; mosi-pin = <20>; miso-pin = <14>; cs-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; &flash0 { partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; boot_partition: partition@0 { label = "mcuboot"; reg = <0x00000000 0xc000>; }; slot0_partition: partition@c000 { label = "image-0"; reg = <0x0000C000 0x32000>; }; slot1_partition: partition@3e000 { label = "image-1"; reg = <0x0003E000 0x32000>; }; scratch_partition: partition@70000 { label = "image-scratch"; reg = <0x00070000 0xa000>; }; storage_partition: partition@7a000 { label = "storage"; reg = <0x0007a000 0x00006000>; }; }; };