# XTENSA architecture configuration options # Copyright (c) 2016 Cadence Design Systems, Inc. # SPDX-License-Identifier: Apache-2.0 menu "XTENSA Options" depends on XTENSA config ARCH default "xtensa" config SIMULATOR_XTENSA bool "Simulator Target" help Enable if building to run on simulator. config XTENSA_RESET_VECTOR bool "Build reset vector code" default y help This option controls whether the initial reset vector code is built. This is always needed for the simulator. Real boards may already implement this in boot ROM. config XTENSA_GEN_HANDLERS bool "Automatically generate interrupt handlers" default n help When set, an "xtensa_handlers.h" file is generated containing definitions for the interrupt entry code of the target Xtensa core, based automatically on the details in the core-isa.h file. This replaces the previous scheme where a _soc_inthandlers.h file would be generated offline. config XTENSA_USE_CORE_CRT1 bool "Use crt1.S from core" default y help SoC or boards might define their own __start by setting this setting to false. config XTENSA_ENABLE_BACKTRACE bool "Backtrace on panic exception" default y depends on SOC_SERIES_ESP32 || SOC_FAMILY_INTEL_ADSP || SOC_XTENSA_DC233C help Enable this config option to print backtrace on panic exception config XTENSA_SMALL_VECTOR_TABLE_ENTRY bool "Workaround for small vector table entries" help This option enables a small indirection to bypass the size constraint of the vector table entry and moved the default handlers to the end of vector table, renaming them to _Level\LVL\()VectorHelper. config XTENSA_RPO_CACHE bool "Cached/uncached RPO mapping" help Support Cached/uncached RPO mapping. A design trick on multi-core hardware is to map memory twice so that it can be seen in both (incoherent) cached mappings and a coherent "shared" area. if XTENSA_RPO_CACHE config XTENSA_CACHED_REGION int "Cached RPO mapping" range 0 7 help This specifies which 512M region (0-7, as defined by the Xtensa Region Protection Option) contains the "cached" mapping. config XTENSA_UNCACHED_REGION int "Uncached RPO mapping" range 0 7 help As for XTENSA_CACHED_REGION, this specifies which 512M region (0-7) contains the "uncached" mapping. endif config XTENSA_CCOUNT_HZ int "CCOUNT cycle rate" default 1000000 help Rate in HZ of the Xtensa core as measured by the value of the CCOUNT register. config XTENSA_MORE_SPIN_RELAX_NOPS bool "Use Xtensa specific arch_spin_relax() with more NOPs" help Some Xtensa SoCs, especially under SMP, may need extra NOPs after failure to lock a spinlock. This gives the bus extra time to synchronize the RCW transaction among CPUs. config XTENSA_NUM_SPIN_RELAX_NOPS int "Number of NOPs to be used in arch_spin_relax()" default 1 depends on XTENSA_MORE_SPIN_RELAX_NOPS help Specify the number of NOPs in Xtensa specific arch_spin_relax(). menu "Xtensa HiFi Options" config XTENSA_CPU_HAS_HIFI bool config XTENSA_CPU_HAS_HIFI3 select XTENSA_CPU_HAS_HIFI bool config XTENSA_CPU_HAS_HIFI4 select XTENSA_CPU_HAS_HIFI bool # Selected when at least one XTENSA_HIFIn version has been configured config XTENSA_HIFI bool if XTENSA_CPU_HAS_HIFI config XTENSA_HIFI3 bool "HiFi3 AudioEngine instructions" depends on XTENSA_CPU_HAS_HIFI3 default y select XTENSA_HIFI help This option enables HiFi 3 instruction support. config XTENSA_HIFI4 bool "HiFi4 AudioEngine instructions" depends on XTENSA_CPU_HAS_HIFI4 default y select XTENSA_HIFI help This option enables HiFi 4 instruction support. config XTENSA_HIFI_SHARING bool "HiFi register sharing" depends on XTENSA_HIFI help This option enables preservation of the hardware HiFi registers across context switches to allow multiple threads to perform concurrent HiFi operations. endif # XTENSA_CPU_HAS_HIFI endmenu # Xtensa HiFi Options if CPU_HAS_MMU config XTENSA_MMU bool "Xtensa MMU Support" select MMU select ARCH_MEM_DOMAIN_SYNCHRONOUS_API if USERSPACE select XTENSA_SMALL_VECTOR_TABLE_ENTRY select KERNEL_VM_USE_CUSTOM_MEM_RANGE_CHECK if XTENSA_RPO_CACHE select CURRENT_THREAD_USE_NO_TLS if USERSPACE help Enable support for Xtensa Memory Management Unit. if XTENSA_MMU choice prompt "PageTable virtual address" default XTENSA_MMU_PTEVADDR_20000000 help The virtual address for Xtensa page table (PTEVADDR). config XTENSA_MMU_PTEVADDR_20000000 bool "0x20000000" endchoice config XTENSA_MMU_PTEVADDR hex default 0x20000000 if XTENSA_MMU_PTEVADDR_20000000 help The virtual address for Xtensa page table (PTEVADDR). config XTENSA_MMU_PTEVADDR_SHIFT int default 29 if XTENSA_MMU_PTEVADDR_20000000 help The bit shift number for the virtual address for Xtensa page table (PTEVADDR). config XTENSA_MMU_NUM_L1_TABLES int "Number of L1 page tables" default 1 if !USERSPACE default 4 help This option specifies the maximum number of traslation tables. Translation tables are directly related to the number of memory domains in the target, considering the kernel itself requires one. config XTENSA_MMU_NUM_L2_TABLES int "Number of L2 page tables" default 20 if USERSPACE default 10 help Each table can address up to 4MB memory address. config XTENSA_MMU_DOUBLE_MAP bool "Map memory in cached and uncached region" help This option specifies that the memory is mapped in two distinct region, cached and uncached. config XTENSA_INVALIDATE_MEM_DOMAIN_TLB_ON_SWAP bool help This invalidates all TLBs referred by the incoming thread's memory domain when swapping page tables. config PRIVILEGED_STACK_SIZE # Must be multiple of CONFIG_MMU_PAGE_SIZE default 4096 endif # XTENSA_MMU endif # CPU_HAS_MMU if CPU_HAS_MPU menuconfig XTENSA_MPU bool "Xtensa MPU Support" select MPU select SRAM_REGION_PERMISSIONS select XTENSA_SMALL_VECTOR_TABLE_ENTRY select ARCH_MEM_DOMAIN_SYNCHRONOUS_API if USERSPACE select CURRENT_THREAD_USE_NO_TLS if USERSPACE select EXPERIMENTAL # TODO: the target the MPU code developed on (basically sample_controller # plus MPU minus s32c1i) does not have cache or SMP capability. # Need to verify functionalities with targets supporting these. depends on !CACHE && !SMP help Enable support for Xtensa Memory Protection Unit. if XTENSA_MPU config XTENSA_MPU_DEFAULT_MEM_TYPE hex "Default Memory Type" default 0x18 help Default memory type for memory regions: non-cacheable memory, non-shareable, non-bufferable and interruptible. If userspace is enabled, it will be used to restore the memory type of the region being removed from a memory domain. config XTENSA_MPU_ONLY_SOC_RANGES bool help Enable this by the SoC to indicate to the architecture code to use the MPU ranges specified by SoC only, and skip the common ranges defined in the core architecture code. This gives total control to the SoC on the MPU ranges. endif # XTENSA_MPU endif # CPU_HAS_MPU config XTENSA_SYSCALL_USE_HELPER bool "Use userspace syscall helper" default y if "$(ZEPHYR_TOOLCHAIN_VARIANT)" = "xt-clang" depends on (XTENSA_MMU || XTENSA_MPU) && USERSPACE help Use syscall helpers for passing more then 3 arguments. This is a workaround for toolchains where they have issue modeling register usage. config XTENSA_INSECURE_USERSPACE bool default y depends on (XTENSA_MMU || XTENSA_MPU) && USERSPACE endmenu