CONFIG_NET_VLAN=y

# We have one non-vlan interface and two VLAN interfaces
CONFIG_NET_VLAN_COUNT=2

# There will be three network interfaces.

# First ethernet interface will use these settings
CONFIG_NET_CONFIG_MY_IPV6_ADDR="2001:db8::1"
CONFIG_NET_CONFIG_PEER_IPV6_ADDR="2001:db8::2"
CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1"
CONFIG_NET_CONFIG_PEER_IPV4_ADDR="192.0.2.2"

# Second ethernet interface will have these settings
CONFIG_NET_SAMPLE_IFACE2_MY_IPV6_ADDR="2001:db8:100::1"
# TEST-NET-2 from RFC 5737
CONFIG_NET_SAMPLE_IFACE2_MY_IPV4_ADDR="198.51.100.1"
CONFIG_NET_SAMPLE_IFACE2_MY_IPV4_NETMASK="255.255.255.0"
# VLAN tag for the second interface
CONFIG_NET_SAMPLE_IFACE2_VLAN_TAG=100

# Settings for the third network interface
CONFIG_NET_SAMPLE_IFACE3_MY_IPV6_ADDR="2001:db8:200::1"
# TEST-NET-3 from RFC 5737
CONFIG_NET_SAMPLE_IFACE3_MY_IPV4_ADDR="203.0.113.1"
CONFIG_NET_SAMPLE_IFACE3_MY_IPV4_NETMASK="255.255.255.0"
# VLAN tag for the second interface
CONFIG_NET_SAMPLE_IFACE3_VLAN_TAG=200

# Each interface needs at least 2 context. So if we have three
# interfaces we need minimum 6 context but allocate more so that
# we do not run out of them.
CONFIG_NET_MAX_CONTEXTS=10
CONFIG_NET_MAX_CONN=10