# Copyright (c) 2017 I-SENSE group of ICCS
# SPDX-License-Identifier: Apache-2.0

description: STM32 I2C V2 controller

compatible: "st,stm32-i2c-v2"

include: [i2c-controller.yaml, pinctrl-device.yaml]

properties:
  reg:
    required: true

  interrupts:
    required: true

  pinctrl-0:
    required: true

  pinctrl-names:
    required: true

  timings:
    type: array
    description: |
        An optional table of pre-computed i2c timing values with the
        matching clock configuration.

        Precise timings values for a given Hardware can be pre-computed
        with a tool like STM32CubeMX or directly from I2C_TIMINGR register
        description.

        Because timing value is valid for a given I2C peripheral clock
        frequency and target I2C bus clock, each timing value must be
        provided with the matching configuration.

        The resulting table entries should look like <periph_clock
        clock-frequency timing>

        For example timings could be defined as

            timings = <64000000 I2C_BITRATE_STANDARD 0x10707DBC>,
                      <64000000 I2C_BITRATE_FAST 0x00603D56>,
                      <56000000 I2C_BITRATE_STANDARD 0x10606DA4>,
                      <56000000 I2C_BITRATE_FAST 0x00501D63>;

  scl-gpios:
    type: phandle-array
    description: |
      GPIO to which the I2C SCL signal is routed. This is only needed for
      I2C bus recovery support.

  sda-gpios:
    type: phandle-array
    description: |
      GPIO to which the I2C SDA signal is routed. This is only needed for
      I2C bus recovery support.