This refactors internal bits out of the public API header file
and into its own file. This includes:
* Driver API struct which is only used by driver implementations
but not by users of API.
* Inline implementations of various APIs.
* Inline z_impl_*.
These are implementation details that do not need to live within
the public API header file. This de-clutters the public header
file.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add `idle` and `s2ram` power states for nRF54H20 cpuapp and cpurad.
Also the substate `idle_cache_disable` added.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Due to the possibility of simultaneous accesess to LRCCONF registers,
additional management is required.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Currently, the serialization module for 802.15.4 enabled
the network core without giving it access to application
core memory in trusted execution mode. This commit
grands this access.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
Some code that automatically gets embedded on some platforms relies
on having `CONFIG_TIMEOUT_64BIT` enabled.
Do not force disabling that Kconfig option in the test configuration,
as that will make the test fail to compile on those platforms.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
CMAKE_LINKER_GENERATOR common-ram.cmake is out of date.
This updates it to keep it up to date with common-ram.ld
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
Introduce etrbuffer in the tddconf bindings to support flexible
placement in the memory map.
Signed-off-by: Karsten Koenig <karsten.koenig@nordicsemi.no>
Get eclair specific option file variable via zephyr_get.
This is also needed if the sca is invoked with sysbuild so it uses
the intended file.
Signed-off-by: Simon Hein <Shein@baumer.com>
DMA transfers do not execute when the USBD peripheral is in Low Power
mode. Make sure that there is no DMA active transfer when entering Low
Power mode and that new DMA transfers are not started when in Low Power
mode because the transfer won't ever finish.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Low Power mode can only be entered when there are no active DMA
transfers. Move the Suspend and Resume processing to thread to allow
waiting for the DMA available semaphore in USB Suspend handler.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This commit adds a runner wrapper for the 'minichlink' program which
offers a free, open mechanism to use the CH-LinkE programming dongle for
the CH32V003.
https://github.com/cnlohr/ch32v003fun/tree/master/minichlink
Signed-off-by: Michael Hope <michaelh@juju.nz>
Signed-off-by: Dhiru Kholia <dhiru.kholia@gmail.com>
This commit adds support for the CH32V003EVT board which features a
32-bit general-purpose RISC-V MCU.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Signed-off-by: Dhiru Kholia <dhiru.kholia@gmail.com>
This commit adds the pfic interrupt controller driver for WCH CH32V003.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Signed-off-by: Dhiru Kholia <dhiru.kholia@gmail.com>
This commit adds the usart driver for WCH CH32V003.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Signed-off-by: Dhiru Kholia <dhiru.kholia@gmail.com>
This commit adds the systick driver for WCH CH32V003.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Signed-off-by: Dhiru Kholia <dhiru.kholia@gmail.com>
This commit adds the clock driver for WCH CH32V003.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Signed-off-by: Dhiru Kholia <dhiru.kholia@gmail.com>
This commit adds the pinctrl driver for WCH CH32V003.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Signed-off-by: Dhiru Kholia <dhiru.kholia@gmail.com>
This commit adds the dtsi and bindings for the WCH CH32V003 which is a
32-bit general-purpose RISC-V MCU.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Signed-off-by: Dhiru Kholia <dhiru.kholia@gmail.com>
This addresses the following warning building with `CONFIG_64BIT=y`:
error: format '%hu' expects argument of type 'int', but argument X has
type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
bt_le_set_auto_conn() function is not working as
expected. Also, it doesn't have any test coverage
and any usage in sample applications.
The function is deprecated
Fixes#81597
Signed-off-by: Ivan Iushkov <ivan.iushkov@nordicsemi.no>
The ram0x partitions seem to be not compliant with nRF54H20
architecture and it causes that in the application dts overlay file
it is difficult to extend cpuapp_ram0x_region without modifying
whole layout.
It is better to place cpurad_ram0x_region at the beginning at
2f010000 address and then cpuapp_ram0x_region right after that.
Thanks to that, if the application needs to have more than 256 kB
of RAM, in the application dts overlay file, a user can increase
cpuapp_ram0x_region size up to 2f0be000.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
Add missing "pinctrl-names" and "status" properties for
the spi1 node in ek_ra8m1.dts to able to test spi_loopback
on ek_ra8m1
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
TX part of interrupt driven API was not calling PM device runtime
API. Additionally, when txstopped occurred after poll out it was
not handled correctly.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves syslog into a singular
testsuite at tests/posix/xsi_system_logging app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
Add a timeout to the `bme280_wait_until_ready` loop to ensure that we
never get stuck in this loop even if the bus enters an error condition.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Commit e2a32d8b0ca596afeae48739c43817f693720a88 introduced an unbound
cmd issue for jlink flashing.
Fixed by moving cmd assignment outside of condition.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Adding new CONFIG_MBEDTLS_PSA_KEY_SLOT_COUNT to select the number
of key slots in PSA Crypto core. The default value is 16. Be aware
that key slots consume RAM memory even if unused, so the proper value
should be a compromise between the number of slots required by
the application and the available RAM in the system.
This commit also:
- updates tests/crypto/secp256r1/mbedtls.conf to showcase how to
use this new symbol to reduce RAM footprint.
- tests/bsim/bluetooth/mesh/overlay_psa.conf to support all the
keys used in the test.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Adding the Kconfig symbol CONFIG_MBEDTLS_PSA_STATIC_KEY_SLOTS
to allow Mbed TLS's PSA Crypto core to use static key buffers
to store key's material. This helps reducing heap memory
usage and, potentially, it also discard code implementing
heap memory management if there's no other module in the build
that makes use of it.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Update the Mbed TLS revision so as to take in a patch which
allows to use static key slot buffers for the PSA Crypto core
instead of dynamic (i.e. heap based) ones.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add a simple demonstration of the led_write_channels api on the lp5569
driver sample.
The demonstration simply turns on all of the channels with a single call to
led_write_channels. Then the same is done for turning off the channels.
Thus, it doesn't add much visually, but it shows the usage of the api.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
The lp5569 has multiple pwm outputs, and thus implementing the
write_channels api to set multiple values in a single call makes sense.
Implement the write_channels function with a basic range check on the
channel range.
Since the lp5569 supports auto-increment, all of the channels can be
written in one i2c transfer, starting from the pwm register of the
start_channel.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
The lp5569 controller supports auto-increment for its registers. This is by
default enabled in the chip, but the driver actively disabled it.
Since auto-increment is useful for writing multiple consecutive registers,
enable the feature. The driver, however, doesn't perform such consecutive
writes and thus the existing behavior is not altered.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
k_thread_suspend() is an async API intended to stop any thread in any
state from any context. Some apps just want to use it to "suspend
myself", which is a much (!) simpler operation. Detect that specific
usage as a performance case.
Signed-off-by: Andy Ross <andyross@google.com>
This puts the syscall helpers into the vector code section, and
is a tiny TLB optimization. Before this, worst case scenario is
that there would 2 instruction TLB misses when both the syscall
helpers and the vector code pages are not in TLB cache. With
this change, there would be at most 1 instruction TLB miss as
now the syscall helper and the vector code (which includes
exception handling code and xtensa_do_syscall()) are now in
the same page, and the same TLB entry.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The B_L4S5I_IOT01A Discovery kit does not boot up when using --sysbuild.
The error is caused by slot0_partition which is assigned an address of
0x1000 which overlaps with the boot_partition. Setting the address to
0x10000 fixed it.
Signed-off-by: Winston Arrocena <we.arrocena@gmail.com>
This adds support for the single-vector trapping (SVT) model, defined by
SPARC-V8 Embedded (V8E) Architecture Specification. SVT is available in
most LEON processors.
With single-vector trapping enabled, all traps are vectored through a
single trap vector (TBR.A) rather than one 16-byte entry for each trap
type. This improves memory utilization because the full 4 KiB trap table
is not needed.
This implementation uses a two-level of lookup table to find the handler
for the trap type (0..255).
- Execution time is constant.
- Condition flags are preserved.
- The implementation footprint is 60 bytes .text and 284 bytes .rodata.
For comparison, a non-SVT table is always 4096 .text.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Added mikrobus_header, mikrobus_i2c, mikrobus_spi and mikrobus_serial
node labels to da14695_dk_usb device tree board definition, allowing
compatible shield boards to be used. Also fixed minor issues with
pin assignment and header labelling.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Reducing the heap requirement for the hci_ipc sample from
8KiB to 4KiB. It has been tested in various configurations to
work with 2300, but 4KiB was used to provide some leeway for
future updates.
The heap requirement is not documented, and it is unclear why
values lower than 2300 (not exact number) won't boot, and should
be investigated further.
Memory has become a very scarce resource for especially the ISO
builds for the nRF5340, which is why this is getting reduced.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The SSP driver has odd dependency to outside definition of
CONFIG_INTEL_NM. This is in practise tied to SSP hardware
version and always enabled for SSP block version 1.0.
Use the new SSP_IP_VER define to replace the CONFIG_INTEL_MN
preprocssor checks. Also modify the board test case to
remove the obsolete config setting.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Use Kconfig to configure watchdog instead of using expensive filters.
Also disable CONFIG_TEST_HW_STACK_PROTECTION for this test so we do not
have to create special cases.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enabling CONFIG_FPU and CONFIG_FPU_SHARING requires the
definition of `arch_float_disable` and `arch_float_enable`.
Signed-off-by: Matthias Alleman <matthias.alleman@basalte.be>
This fixes memory corruption of delayable work when
tests executes unsupported function.
When test (e.g. only_rx_in_chunks) is executed it starts
delayed work for master functionality (with 10 ms delay).
Later when slave function is tried and reports that
function is unsupported, test is terminated (task ends)
but work is still scheduled.
When next test starts it clears work that is already
scheduled:
static void before(void *not_used)
{
ARG_UNUSED(not_used);
memset(&tdata, 0, sizeof(tdata));
this leads to memory corruption and system work queue
tries to remove work but it never does since head/next
pointers are zeroed at that time.
This just adds after function that cancels work
regardless if it was scheduled or not.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
The blobs are now part of nrf_wifi module, and remove the manual check
and add verifying the blobs and their integrity using helper function.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The shim files should be part of the Zephyr module directory within
Zephyr, as they are coupled with the module implementation which os OS
agnostic.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Following the naming convention add an underscore and update path in the
maintainers file too.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Do not enable the video sw generator if a real camera is present. This
helps to save some spaces and to avoid unrelated code going
into the built image.
Signed-off-by: Trung Hieu Le <trunghieu.le@nxp.com>
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Most likely there is no point of synchronizing RTC if net core is
not enabled. Same for the bootloader.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Replacing "area: Networking" with "area: PTP" to prevent from
including myself in issues and PRs that are related to every
piece of Networking code. Insted I'll be included only in PTP
related issued/PRs.
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
Enable BLE feature for Nucleo-WB09KE and Nucleo-WB05KZ.
Dedicate 32KB and 8KB at the end of flash memory to storage partition on
Nucleo-WB09KE and Nucleo-WB05KZ respectively.
Add ble tag to the both devices yaml file.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Put the default value for BT_AUTO_PHY_UPDATE and BT_AUTO_DATA_LEN_UPDATE
to "n" at SOC level since they cause "controller busy" due to starting
several parallel BLE procedures during connection by
"perform_auto_initiated_procedures" function. At the moment, ST controller
does not support parallelism, i.e. host should not initiate a new procedure
before previous one is completed.
Disable CONFIG_BT_HCI_ACL_FLOW_CONTROL at SOC level.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Add Bluetooth HCI driver for STM32WB0x series.
Modify CMakeLists.txt to compile the driver based on its kconfig parameter.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
This PR adds arduino giga r1 overlay in the dac sample.
Arduino Giga R1 has a 3.5mm audio jack connected to the
dac.
Signed-off-by: Mario Paja <mariopaja@hotmail.com>
allows use of touch_sensor, rtc_counter, and wdt simultaneously by enabling
ESP_INTR_FLAG_SHARED when calling esp_intr_alloc()
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
The `Kconfig.defconfig` is not good place for put `select PINCTRL`.
Drop `select PINCTL` from `Kconfig.defconfig` and add it at each
driver's Kconfig.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
A warning could be generated when compiling with -Wtype-limits. This
works around the warning which could happen if initial_count is 0 and
count_limit is K_SEM_MAX_LIMIT.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The function does not return the language, but rather stores
the lang in the provided lang param.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
bt_conn_le_create logs a warning if the provided conn is
non-NULL which was the case here. Simply set it to
NULL as it is a local variable.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Optionally write to ad559x register bit which increases DAC output range
from 0V to 2 x Vref.
The functionality has been tested on AD5593r.
The voltage at 4095 has been measured to 5.01 volts.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
The `default y`, which is coupled with
`depends on DT_HAS_WOLFSON_WM8904_ENABLED` to link the settings with
DeviceTree, which was missing, so I added it.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add a new west command as helper for package management of Zephyr
and modules.
The first package manager to get supported is pip, where west projects
can list individual packages or requirements files in their module file.
A convenience --install argument is added to install the packages instead.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This is a follow-up to 21475774fc,
extending the number of tests and samples that use the new L05 and L10.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the connection and advertising intervals of the
broadcast and connected ISO samples (including benchmark
samples) to work better with the selected SDU intervals
and the resulting ISO intervals.
For the ISO connected benchmark the order of CIG and ACl
has changed, so that we create the CIG before connecting
the ACL for the purpose of providing as much information
as possible to the controller.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When CONFIG_ASSERT is enabled, assertion for unbalanced state lock
get/put is triggered. This commit leverages shi drivers from other
SoCs to resolve the assertion.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
This change introduces the ability in twister to select which
emulation/simulation tool to use on the command line.
If none is specified, it will select the first in the list.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
This simplifies the code and makes it clearer that both properties are
defined in terms of the Binding object matched to a given DT node.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
This commit adds test to assert that thread specific data is deallocated
on thread termination.
Signed-off-by: Jakub Michalski <jmichalski@antmicro.com>
The MMU mapping in SoC covers 0x0 which prevents catching NULL
pointer accesses. Since there are no hardware registers at
the very first page of memory, we move the starting point one
page later.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This change disables USB debug path at default, in order to prevent SoC
from entering debug mode when there is signal toggling on GPH5/GPH6.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
To make AP related code/config more clear and clean, use
CONFIG_WIFI_NM_WPA_SUPPLICANT_AP for supplicant based AP case,
and use CONFIG_WIFI_NM_HOSTAPD_AP for hostapd based AP case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
- Add SPI driver support for RA
- RA2A1 not support slave select keeping level so disable it
in Kconfig
Signed-off-by: Tri Nguyen <tri.nguyen.wj@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
`_current` is now functionally equals to `arch_curr_thread()`, remove
its usage in-tree and deprecate it instead of removing it outright,
as it has been with us since forever.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Implement `arch_curr_thread()` & `arch_set_curr_thread()`
with the global pointer (GP) register.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add the following arch-specific APIs:
- arch_curr_thread()
- arch_set_curr_thread()
which allow SMP architectures to implement a faster "get current
thread pointer" than the default provided by the kernel. The 'set'
function is required for the 'get' to work, more on that later.
When `CONFIG_ARCH_HAS_CUSTOM_CURRENT_IMPL` is selected, calls to
`_current` & `k_sched_current_thread_query()` will be redirected to
`arch_curr_thread()`, which ideally should translate into a single
instruction read, avoiding the current
"lock > read CPU > read current thread > unlock" path in SMP
architectures and thus greatly improves the read performance.
However, since the kernel relies on a copy of the "current thread"s on
every CPU for certain operations (i.e. to compare the priority of the
currently scheduled thread on another CPU to determine if IPI should be
sent), we can't eliminate the copy of "current thread" (`current`) from
the `struct _cpu` and therefore the kernel now has to invoke
`arch_set_curr_thread()` in addition to what it has been doing. This
means that it will take slightly longer (most likely one instruction
write) to change the current thread pointer on the current
CPU.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The clock_t and clockid_t types are already defined in ARC MWDT headers,
so they should not be defined again in Zephyr headers.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
The clockid_t definition in question is not reachable anymore
because at least one of _CLOCKID_T_DECLARED and __clockid_t_defined
macros is already defined by that point, always making the check fail.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
Until POSIX layer decoupling is done, we still need the size_t type
definition across the codebase, but it should come through sys/types.h
and not through toolchain-specific headers.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
As the test uses reentrant time functions like asctime_r or ctime_r,
it should select POSIX_C_LANG_SUPPORT_R. Otherwise there are build
failures observed with the default test configuration if these
functions are not provided by the toolchain.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
This change is needed to avoid including Zephyr-specific implementations
of POSIX reentrant functions while building natively. One can safely
assume that the host libc indeed provides its own implementations of
the said functions.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
ARC MWDT library does not contain implementations for the reentrant
POSIX time functions, so common Zephyr implementations end up being
used instead. However, there are no declarations, so we just add them
here, unguarded, until a better place is found.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
The fileno macro defined in ARC MWDT headers conflicts with the fileno()
function defined in lib/posix/options/device_io.c. We should undefine it
and replace with a POSIX-compliant declaration and a weak definition.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
mipi api allows only buffers where pitch is equal to width.
buffers with smaller width get split into multiple transmissions
but mipi buffer size was set incorrectly.
Signed-off-by: Manuel Martin <martiman89+github@gmail.com>
Document change to mipi-dbi device binding, and provide users with
example of how to transition to the new mipi-mode property.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use a string for the mipi-mode property over an integer value, as this
significantly improves the readability of the MIPI DBI device binding.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The python subprocess call had a stdout=subprocess.PIPE parameter that
redirects standard output to a pipe, and a stderr=subprocess.STDOUT
parameter that redirected stderr to the pipe. This mixed JSON and
non-JSON output together, and issued an exception. Fixing with
stderr=subprocess.DEVNULL to ignore standard error and only keep the
JSON output.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Reset pulse count can be up to 512 before we would be unable to support
it using the peripheral. Use a uint32_t for the count, so that even long
reset pulses will still be calculated correctly. Add code to warn about
reset pulse requests that are too long.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The NXP LCDIC peripheral contains two internal timers, with configurable
periods. These times are used to determine delays within the peripheral,
such as the reset and tearing enable signal delays. Allow these periods
to be set within the devicetree for the peripheral.
Raise the period where required for display drivers that need a value
other than the reset setting
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Extend tca954x (tca9546a, tca9548a) driver to support tca9544a i2c MUX.
(different bitmask and flag for enable bit in register)
Signed-off-by: Florian Weber <Florian.Weber@live.de>
Add isr_ok property to the interrupt configure API.
For level-triggered interrupt the interrupt may have to be disabled
until a thread context can process it and clear the interrupt trigger.
The function is documented as returning an error if it would block.
Drivers in zephyr already do this, so if this is not ISR safe function
then they need to be fixed.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
- Add possibility to disable functions that use heap. This is to
reduce code size and prevent accidental use of heap.
- Add possibility to compile xxhash library, "Extremely Fast Hash
algorithm" in. It might be sometimes needed as a standalone,
but especially lz4frame requires it.
- Add possibility to compile also hc and lz4frame modules. The
config options include possibility to configure will heap or
stack be used. Defaults are set according to lz4's current
defaults.
Signed-off-by: Miika Karanki <miika.karanki@vaisala.com>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for sap.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Add note about compatible change for NXP PORT IP. Also, update
references to the DT compatible within board docs.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
NXP PORT IP instantiations often have different features absent, IE
input buffer, open drain, or slew rate support. Check if the relevant
PCR register bitmasks are defined in the common pin control file, and
define the bitmasks to 0x0 (no effect) if they are not. This allows us
to further consolidate the pinctrl_soc.h headers for SOCs using the PORT
IP.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The NXP PORT pinmuxing peripheral is reused across the MCX, S32, and
Kinetis lines. Rename the compatible from the family-specific
nxp,kinetis-pinctrl to a more generic nxp,port-pinctrl to reflect the
actual name for the IP block used within reference manuals.
Update the NXP HAL revision to include a change to use the new Kconfig
name for the PORT pinctrl driver
Update the MAINTAINERS.yml path, as there are no longer any NXP drivers
matching the string "drivers/*/*kinetis*
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
* Replace copies of fixed-partitions nodes in related boards by
referencing the apropriate partition table from the available list.
* For better reference the `partitions_*.dtsi` file has boot offset,
purpose and the flash size encoded in the file name. Default flash size
is considered to be 4MB.
* Added the flash size node for the boards which are not based on the
module.
* Removed flash size registry from the esp32.*common.dtsi
Signed-off-by: Marek Matej <marek.matej@espressif.com>
flash_copy() is performed on a page.size span but following flash_read()
verification step is performed on EXPECTED_SIZE length (512).
This doesn't work on devices where page.size is lower than EXPECTED_SIZE,
such as STM32L1 where page size is 256.
To fix this, perform verification on the smalest value between page.size
and EXPECTED_SIZE.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
STM32F4 series flash layout is as follows:
{.pages_count = 4, .pages_size = KB(16)},
{.pages_count = 1, .pages_size = KB(64)},
{.pages_count = 7, .pages_size = KB(128)}
Since NVS subsys requires 2 sectors of max 32K in total, provide a
flash partition which respects this constraint using 2 of the 16K sectors
in the beginning of the layout.
Provide a compatible flash partition usable with mcuboot, but keep the
storage partition commented as its usage is not compatible with use w/o
mcuboot enabled (in this case main image starts as offset 0 which conflicts
with storage partition).
Note that it isn't possible either to get main image starting directly
in the 128K sectors w/o bootloader as boot flash address can't be
configured.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
NVS susbsystem requires a slot covering 2 sectors of flash, which
should be at minimum 8K on L1 series which provides 4K sectors.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
NVS susbsystem requires a slot covering 2 sectors of flash, which
should be at minimum 4K on G0 series which provised 2K sectors.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
STM32F2 series flash layout is as follows:
{.pages_count = 4, .pages_size = KB(16)},
{.pages_count = 1, .pages_size = KB(64)},
{.pages_count = 7, .pages_size = KB(128)}
Since NVS subsys requires 2 sectors of max 32K in total, provide a
flash partition which respects this constraint using 2 of the 16K sectors
in the beginning of the layout.
Provide a compatible flash partition usable with mcuboot, but keep the
storage partition commented as its usage is not compatible with use w/o
mcuboot enabled (in this case main image starts as offset 0 which conflicts
with storage partition).
Note that it isn't possible either to get main image starting directly
in the 128K sectors w/o bootloader as boot flash address can't be
configured.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Updated ADXL367 driver with RTIO stream functionality.
RTIO stream is using both FIFO threshold and FIFO full triggers.
Together with RTIO stream, RTIO async read is also implemented.
Supported FIFO_CHANNEL configurations:
- XYZ
- X
- Y
- Z
- XYZT
- XT
- YT
- ZT
Configurations with external ADC are currently not supported.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
The required ISO Tx buffers have to match the Read Buffer
Size values, otherwise the difference in the value cause a
similar amount of buffers to be stalled in the IPC driver.
Use reduced HEAP size to make room for increase in RAM
usage.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix some test simulation length be greater than wait time.
These tests completed within 12 seconds, 15 second wait
time is a good value with included margin and a 20 second
simulation time.
These tests failed on this PR CI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation for Extended Advertising Auxiliary PDUs
to use ticks slot window feature.
This will allow the periodic scheduling of AUX_ADV_IND PDUs
to drift upto 10 ms advertising delay minus the ticks_slot
time reservation of the AUX_ADV_IND PDU when overlapping
with other states/roles that cannot be moved around, to
avoid skipping them.
Having an active Extended Advertising simultaneously with
an ISO Synchronized Receiver or Connected ISO connection
will now have less ISO SDU loss when using 10 ms ISO
intervals.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce ticker reschedule with drift so that role like
AUX_ADV_IND can start after overlapping states and roles
using time reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to reschedule before overlap and be collision resolved
in the next periodic interval for tickers using slot window
yield.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Exclude stm32 platforms with accel0 or magn0
for running the samples/sensor for trigger
as their sensor driver does not have trigger set.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Align the total SRAM size for STM32L47x/L48x/L49x/L4Ax
boards. Those MCUs with up to 320 Kbytes SRAM:
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Split and fix the total SRAM size for STM32L4Px/L4Qx/L4Rx/L4Sx
device. Those MCUs with up to 640 Kbytes SRAM:
This is 640KB for the STM32L4Rxxx and STM32L4Sxxx devices :
• 192 Kbytes SRAM1 + 64 Kbytes SRAM2 + 384 Kbytes SRAM3
This is 320KB for the STM32L4P5xx and STM32L4Q5xx devices :
• 128 Kbytes SRAM1 + 64 Kbytes SRAM2 + 128 Kbytes SRAM3
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Align the total SRAM size for STM32L47x/L48x/L49x/L4Ax
boards. Those MCUs with up to 320 Kbytes SRAM:
• 96 Kbytes SRAM1 and 32 Kbyte SRAM2 on STM32L47x/L48x.
• 256 Kbyte SRAM1 and 64 Kbyte SRAM2 on STM32L49x/L4Ax
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Split and fix the total SRAM size for STM32L47x/L48x/L49x/L4Ax
device. Those MCUs with up to 320 Kbytes SRAM:
• 96 Kbytes SRAM1 and 32 Kbyte SRAM2 on STM32L47x/L48x.
• 256 Kbyte SRAM1 and 64 Kbyte SRAM2 on STM32L49x/L4Ax
The sram0 node at address 0x20000000 and sram1 at address 0x10000000
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for IP_LOCAL_PORT_RANGE socket option. The option
supports both IPv4 and IPv6 sockets although the type is IPPROTO_IP.
The option can be used to enforce the ephemeral port number selection
to be in certain range.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
All linter issues in scripts/west_commands/runners are fixed and can be
removed from the exclusion list.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
These ignores were added with an older version of pylint and are
either removed or ignored by default.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Switch to short test identifier in reporting.
Part of a series of changes to improve reporting and remove duplication
and clutter when running twister.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix Ztest test function name extraction from ELF symbols
for C++ compiled binaries where symbol names need additional
'demangling' to match with corresponding test names.
The `c++filt` utility (part of binutils) is called for
demangling when it is needed.
Twister test suite extension and adjustment.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Update Test Application diagram as well as Test Scenario and
Test Case naming conventions to make them more clear and aligned
to Ztest suite name included as a part of Test Case name.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix a problem of Ztest suite names not taken into account by Twister
to identify a TestCase, so in some situations a Ztest test's status
was not assigned to the proper TestCase and it remains 'None'
whereas the actual status value lost, eventually the resulting total
execution counters not correct.
The issue was observed in these situations:
* Ztest application with multiple test suites having same test names.
* Ztest suite is 'skipped' entirely on execution with all its tests.
The proposed solution extends Twister test case name for Ztest to
include Ztest suite name, so the resulting identifier looks like:
`<test_scenario_name>.<ztest_suite_name>.<ztest_name>`
The above naming scheme now requires ztest_suite_name part to be
provided for `--sub-test` command line option.
Testcase identifiers in twister.json and testplan.json will also
include ztest_suite_name component.
The Twister Ztest(Test) Harness is improved to track all state changes
known from the test application's log for Ztest suites and test cases,
so now it parses log output from a Ztest application more scurpulously.
Regular expressions to match log records are extended and optimized
to compile them only once and, in some cases, fixed (suite summary).
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
The ICBMsg backend divides its memory into
blocks. Each block is aligned to data cache
alignment. Is it not required, since adjacent
blocks has the same data flow direction (either
read-only or write-only). This commit changes
it to 32-bits making wasted memory significantly
reduced.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
The board shares many features with other Arduinos based on STM32H747
(like the HSE in bypass mode).
Once https://github.com/zephyrproject-rtos/zephyr/pull/76542 is merged,
PF1550 support should be added too to allow switching IO voltage
from 3v3 to 1v8
Signed-off-by: Martino Facchin <m.facchin@arduino.cc>
Right now, USART1 is enabled on the M7 target variant by default, leaving
M4 without a UART to use; this is the way this port was originally
contributed.
Since then, USB was enabled on M7, changing the console backend from USART1
to USB CDC ACM; the M4 target was left unchanged.
This commit enabled USART1 on the M4 variant and disabled it on the M7
variant, so that the M4 variant can use it as its console backend.
Note that, for the M4 variant, USART1 has been assigned to `zephyr,console`
and `zephyr,shell-uart` since this port was contributed, even though USART1
was always disabled on M4.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Replace the DT_INST_PROP_OR statements with defaults
in the devicetree binding of the iCE40.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
This addresses the following warning building with `CONFIG_64BIT=y`:
error: field precision specifier '.*' expects argument of type 'int',
but argument X has type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
This addresses the following warning building with `CONFIG_64BIT=y`:
error: field precision specifier '.*' expects argument of type 'int',
but argument X has type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
This addresses the following warning building with `CONFIG_64BIT=y`:
error: field precision specifier '.*' expects argument of type 'int',
but argument X has type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Move "bluetooth" tag and harness from the common section
of the smp_svr sample.yaml file to "bluetooth" specific test cases.
Signed-off-by: Andrej Butok <Andrey.Butok@nxp.com>
What looks to be a copy-paste typo was not caught in
code review.
Change .rwlocks to nothing and move the filter to the
common area.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Remove the deprecated HCI driver API which was provided by the hci_driver.h
header file. The deprecation happened in Zephyr 3.7, so the API can now be
removed for Zephyr 4.1.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
To increase coverage.
Note that we call twister separatedly for this target, due to the 54l15
overlays using UARTE20 which is indexed in simulation as "2", but as
the nrf52833 does not have 3 instances. So "-uart2_loopback" is not
a valid option for a 52833 executable.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf5340 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf54l15 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf54l15 by providing
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Include in the list of supported peripherals the UARTE for the
simulated nrf54l15
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The HW models now support this peripheral for this target.
Let's enable it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add minimum flash requirement to the tests. This will effectively
exclude nrf5340dk/nrf5340/cpuapp/ns as it does not have
enough flash for the application.
Fixes#81608
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Optimize filters and remove build_on_all, this option is already used in
the synchronization sample which has more coverage on small platforms.
Since we only build, it does provide basic sanitcheck for the kernel as
well.
This reduces testplan on PRs and push events by almost 1000 entries that
would only be built or filtered at runtime.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The datasheet of the iCE40 specifies that there should be a leading and
trailing clocks phase during its configuration with SPI. Due to the
limitations of the SPI interface, and probably also due to a lock of
support for such a feature for instance in the STM32 SPI peripheral,
this is achieved with additional SPI transfers before and after the
actual image. Unfortunately, this by default also affects the slave
select GPIO, which has to stay high during these phases.
This fixes this behaviour via not passing the slave select GPIO
to the SPI driver and manipulating this GPIO manually.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Add second instance to be tested on nrf54h20dk. uart120 is a fast UARTE
which works on fixed pin locations. It is not available for cpuppr core.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
b6d45423c6 Added support for pin retention but it was added
only to the case when device PM is used. There is another mode
in which UARTE is disabled when idle (low power mode) and in
that case pin retention must also be added.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
If a character is received immediately after modem_iface_uart_init called,
the modem_iface_uart_isr function will not read the data in the serial port
fifo register as the context has not been registered at this time,
which will result in the program not being able to exit the interrupt,
so the context should registered before the serial port is initialised.
Signed-off-by: Hongquan Li <hongquan.prog@gmail.com>
Replace NULL checks for the set and clear registers with BUILD_ASSERTs
in the iCE40 device instantiation.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
The API directory really isn't the best place for shell
documentation, which isn't API.
Created a new directory for Bluetooth shell documentation
and moved the ISO and LE Audio docs in there.
The existing bluetooth-shell.rst file was also split into
several new files, so that it follows the same structure.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change in default flash map generation, where partitions hanging of
disabled devices will not have flash area generated.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add an option for platforms or forks to provide their own hostap
compatible crypto implementation. This may include proprietary or
platform specific stuff that may or may not be upstreamed to Zephyr.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Extended hardware map to share a single board between variants.
To run tests for different variants on the same board
without re-configuring the hardware map file for each variant,
one can use a `platform` atribute as a list of names.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This commit changes the BSIM tests to use the same recv callback
for all tests. The purpose of this is to reduce code duplication
and make it easier to maintain the tests.
This also changes the recv_cb so that in case of any error we log
the most recently received SDU, which should provide more
information about why a test failed in case of RX error.
PBP had to be updated a bit to support the audio_stream
struct.
Also modifies a check and log in bap_stream that was less than
helpful to determine if it was the stream or the endpoint that
was NULL.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Non-confirmable CoAP requests need lifetime tracking as well
so we can free the structure after a timeout.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When waiting for response after receiving the empty Ack, client
actually used way too timeout.
CoAP timeout only holds the timeout value in ms. t0 is the starting time.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Refactor tests to be a bit shorter, so its easier to read
and copy-paste for a new testcase
All idioms like "ret = somecall(); zasser.." are replaced with just
"zassert_ok(some_call());"
Commonly used structures are global and initialized once.
To avoid cross-test side-effects, suite_after-function is added
to cleanup all requests.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Use real-time scheduler with 100x speedup, so timeouts are
accurate enough, but still fast for tests to run.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Updates and aligns the project config file to enable usage of multiple
keys so that users are not required to manually update the project
config file for testing most common mesh scenarios requiring multiple
netkeys and appkeys.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Aligns subnet bridge related commands according to conventions used for
rest of the shell commands. Also updates documentations to reflect the
change.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
We hit some unaligned access faults running our internal tests.
Not every 32-bit instruction is 32-bit aligned; some are 16-bit aligned.
Make all reads and writes potentially unaligned to be on the safe side.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
Not all STM32 series support Zephyr MDIO API yet, while the API is enabled
by default.
To preserve compatibility, put MDIO API related code under the condition
of "st,stm32-mdio" compatible enablement.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Documentation for *init_hooks were not generated on doc website.
This was due to ill-formed doc-strings for those hooks.
Signed-off-by: Pierrick Guillaume <pierguill@gmail.com>
Previously, rtt start would always fail because the target
(i.e. firmware) had not been started.
```
Info : rtt: Searching for control block 'SEGGER RTT'
Info : rtt: No control block found
```
When the command is 'rtt', run the binary via gdb before calling
'rtt start'. Firmware calls `SEGGER_RTT_Init()` shortly after
init which allows OpenOCD to find the RTT control block.
Similarly, only start the 'rtt server' after calling
'rtt start' to avoid any potential race conditions
internally within OpenOCD.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Previously, there was a warning that the to_num() method can
(and probably should) be unbound from OpenOcdBinaryRunner.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Similar to how print_gdbserver_message() prints GDB server info
when "west debug" is run, print RTT server info when "west rtt"
is run.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add support for the rtt target so that users can run
`west build -p auto -b <board> -t rtt <app>`
similarly to the way that users can now do so with the debug
target, since the rtt target is supposed to be used in a similar
way.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The nRF54L05 and nRF54L10 are identical to the nRF54L15 except for their
memory sizes. Add support for emulating those ICs on the nRF54L15DK.
This commit only adds support for the main application core. Support for
the FLPR core may be added later.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use the rather logical convention for the name that is applied to other
Nordic boards: <board>_common.dtsi for definitions that are common to
the board itself (LEDs, buttons, etc).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
These two new ICs are variants of the nRF54L15 with different memory
sizes:
- nRF54L05: 500KB RRAM, 96KB RAM
- nRF54L10: 1022KB RRAM, 192KB RAM
- nRF54L15: 1524KB RRAM, 256KB RAM
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There are many common options to all ICs of the 54L series. Consolidate
them in a single entry so that they do not need to be re-typed for each
SoC series member.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
TASK_SHUTDOWN was deprecated in newer SOCs and now removed
in MDK 8.68 (nrfx 3.9.0)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update the HW models module to:
3cfca0192ff84da919e9bc7978bcc2239cd6a395
This includes 2 changes:
* 3cfca01 UART: Model more accurately TASKS_FLUSH behaviour
* 25cbd28: 54L15: Change CLOKPOWER IRQ line (MDK 8.68, nrfx 3.9.0)
WARNING! This change breaks backwards compatibility with SW
which expected this line to be 270 for 54L15 devices,
and therefore with MDKs < 8.68 & nrfx < 3.9.0.
This change requires updating to the MDK >=8.68 and nrfx >=3.9.0
if building using the 54L15 models.
52 and 53 models are not affected.
Change the CLOCK_POWER interrupt line from 270 to 261.
This has changed in the latest MDK (8.68) and the new
value is used in the latest nrfx (3.9.0) drivers.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the HW models module to:
42737c8ec8485987c7c9b0262b136de623e1ded2
Including the following:
42737c8 TIMER: Support devices without TASK_SHUTDOWN nrfx3.9 MDK 8.68
5fe6873 54 UARTE: Add frametimeout functionality
dc086d7 UARTE: Add basic 54 support
b046745 UARTE: Support better not having UART functionality
1c5f58c README: Mention the nRF54L15 models cover the L10 and L05
597c7d0 TEMP: Also build hal replacement for 54 and define NRF_TEMP_NS/S
fb2ca83 Makefile: Let's build libraries (specially HAL) as pic
200a1e3 Makefiles: move some common options to common snippet
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adds two new tests for the Subnet Bridge feature, testing group and
virtual addresses as destinations. The tests are based on the existing
`brg_simple.sh` test, with the addition of a new node and a new subnet
to make sure that messages are bridged to multiple subnets, but only
subnets that have a corresponding entry in the bridging table.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Renames `bt_mesh_test_send_ra` to `bt_mesh_test_send_data` and changes
the corresponding callback funciton as it is used outside of the replay
attack tests, and can be used to send custom data. The function is
extended to accept a UUID parameter to allow sending data to virtual
addresses.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
device tree:
enable support for the SDHC controller to use the micro SD card slot
documentation:
- added instructions for SD card and OLED samples
- added links to code samples
defconfig:
added CONFIG_ESP32_USE_UNSUPPORTED_REVISION=y to
ttgo_lora32_esp32_procpu_defconfig
The chip on the board is a ESP32 chip revision 1.
The board will not boot, it displays the following warning at boot:
I (35) boot: chip revision: v1.0
E (38) boot: You are using ESP32 chip revision (1) that is unsupported.
While it may work, it could cause unexpected behavior or issues.
E (50) boot: Proceeding with this ESP32 chip revision is not recommended
unless you fully understand the potential risk and limitations.
E (62) boot: If you choose to continue, please enable the
'CONFIG_ESP32_USE_UNSUPPORTED_REVISION' in your project configuration.
E (73) boot: HW init failed, aborting
In order to prevent a boot loop, CONFIG_ESP32_USE_UNSUPPORTED_REVISION=y
was added to the defconfig.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Use the existing 'atomic' bitmask to speed up ISR processing for
CONFIG_DMA_INTEL_ADSP_HDA_TIMING_L1_EXIT. This bitmask is used
to track enabled DMA channels.
In the common case, only a few DMA channels are active and low
channels are allocated first. Take advantage of this and not
iterate over all DMA channels of all all host devices. Rather
break out as soon as L1 exit handling is done for all enabled
channels.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Change the select to a depends on for the Kconfig options
for HAS and HAS_CLIENT.
This is an effort to reduce the number of selects used by
LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the select of BT_PER_ADV_SYNC and BT_EXT_ADV to
depends on. This is an effort to reduce the use of
select for Kconfig options.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify ASCS and BAP Broadcast sink to depend on the PAC options
instead of selecting them.
Since Kconfig does not support "depends on X if Y",
a select for PAC_{SRC,SNK} is used depending on
ASCS_ASE_{SRC,SNK}.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP Kconfigs option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP_BROADCAST_SOURCE Kconfig option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the selects and use def_bool for BT_AUDIO_RX and
BT_AUDIO_TX.
This is part of an effort to reduce select in Kconfig.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the Kconfig options to depend on the GATT
features rather than selecting them.
This is part of an effort to reduce the amount of
selects we use in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the selects from BT_BAP_UNICAST_SERVER and BT_BAP_UNICAST_CLIENT
and use a def_bool for BT_BAP_UNICAST.
This is part of an effort to reduce select in Kconfig.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use configdefault when enabling LV_COLOR_SWAP_16 within boards and
shield definitions, to avoid OR'ing the dependencies for the Kconfig
symbol. Otherwise, a user manually selecting LV_COLOR_DEPTH will
encounter build errors as LV_COLOR_SWAP_16 may be enabled when
LV_COLOR_DEPTH_16 is not selected
Fixes#81546
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The prior link to the I2C specification was broken and no longer
accessible. Updated the link to a valid and current URL
Signed-off-by: Dhruv Menon <dhruvmenon1104@gmail.com>
Addresses in cmd_load() should always be unsigned. Previously, strtol()
was used, which is limited to signed long values, causing issues with
addresses >= 0x80000000. This commit replaces strtol() with strtoul(),
ensuring proper handling of the full 32-bit address space.
Fixes#81343
Signed-off-by: Aaron Fontaine <aaron.fontaine@dojofive.com>
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@verkada.com>
Previously PMP was avaible only with Multithreading, since it's now
available without MT - add extra checks to prevent user/kernel mode
reconfiguration.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
USE_HYPERRAM macro defined shouldn't be placed under
CONFIG_BOOT_FLEXSPI_NOR.
Add flexspi1 pinmux pinctrl and flash partitions
Add flash partitions and correct flash parameter.
This commit was tested with samples: flash_shell on cm33/cm7 cores
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
add flexspi.c file to get flexspi clock rate.
Enable flexspi1 clock if don't boot from flash.
Use custom fixed mpu_regions.c file to config MPU for CM7
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
A valid device tree configuration is provided for the ADCs of the 8 input
channels and the sample adc_dt works out of the box. Obviously this is
not the only possible configuration but it provides a good template for
further customization without the need to lookup the ADC GPIOs and
connections in the schematics.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
This set of changes enables the RS485 hardware connected to usart3 and
provides some overlays that allow for easily running the modbus
rtu_client and rtu_server samples on Opta.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Some changes to cleanup and clarify some device tree nodes:
* removed wrong sdram2 definition
* added all internal flash slots accessible from M4
* added all internal flash slots accessible from M7
* removed CONFIG_UART_LINE_CTRL because not needed by USB CDC ACM
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
This set of changes reorganize the ethernet configuration by removing the
use a regulator to enable the PHY: the correct GPIO pin is set in code
only if the network has been configured via CONFIG_NET_L2_ETHERNET.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
As long as MBEDTLS_ENTROPY_C is enabled, Mbed TLS needs to
poll some entropy source to gather data that will then be
processed by CTR/HMAC-DRBG modules. This means that in most
of the cases, once MBEDTLS_ENTROPY_C is enabled then also
MBEDTLS_ENTROPY_POLL_ZEPHYR needs to be enabled. This was
done manually until now, as the long list of samples/tests
demonstrate.
This commit solves this dependency by defaulting
MBEDTLS_ENTROPY_POLL_ZEPHYR to on as soon as
MBEDTLS_ENTROPY_C is set. As a consequence, all manual
enablement of MBEDTLS_ENTROPY_POLL_ZEPHYR in samples/tests
are removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The main problem of MBEDTLS_PSA_CRYPTO_LEGACY_RNG is that it
brings in some legacy modules (entropy + ctr_drbg/hmac_drbg)
which means extra ROM/RAM footprint.
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG instead simply calls to the
CSPRNG which makes it definitely smaller.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Auto-select MBEDTLS_CIPHER_AES_ENABLED when AES support is requested
through PSA (i.e. CONFIG_PSA_WANT_KEY_TYPE_AES) and the PSA support is
provided through Mbed TLS itself (i.e. CONFIG_MBEDTLS_PSA_CRYPTO_C).
This mimic what happens in Mbed TLS at build time: if AES support
is required through PSA, but there's no one else providing it
(i.e. no TF-M in Zephyr) then provide this support through legacy
AES module.
This is useful in samples/tests so that the user can simply use the
PSA_WANT symbol to ask for AES support in PSA crypto and then tune
the AES features (ex: CONFIG_MBEDTLS_AES_ROM_TABLES) without the need
to also define CONFIG_MBEDTLS_CIPHER_AES_ENABLED.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Removing direct #define usage in the DTSI file and converting these
definitions to use a dt-bindings header instead.
Relocates the RPI_PICO_DEFAULT_IRQ_PRIORITY definition to a DTSI file and
introduces an override.dtsi file. The override file is used when no other
override file is present, allowing for better flexibility and compliance
with Zephyr’s DTS structure.
Fixes: #79719
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Previously, ipv6 being disabled was a dependency of the hw acceleration
of the checksums for the nxp enet driver, because this ethernet has an
errata causing icmpv6 checksum to not be supported. Now, there is a new
config type in ethernet api for checksum types, so we can re-enable
hardware acceleration for ipv6 by implementing this type in the
get_config api in this driver.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves stropts into a singular
testsuite at tests/posix/xsi_streams app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
The filter here should be used to filter for capability:
whether the platform configuration supports userspace. And if
it does support userspace, we then enable CONFIG_TEST_USERSPACE
(and thus CONFIG_USERSPACE) for testing. We should not be
filtering for whether userspace is enabled, but should really
be filtering for whether userspace is supported.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The filter here should be used to filter for capability:
whether the platform configuration supports userspace. And if
it does support userspace, we then enable CONFIG_TEST_USERSPACE
(and thus CONFIG_USERSPACE) for testing. We should not be
filtering for whether userspace is enabled, but should really
be filtering for whether userspace is supported.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Split the cached area and assign both parts IROM and DROM meaning. This
is necessary to overcome the esptool section merging issues.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
The LVGL flush thread was hard-coded to be cooperative.
For long-running actions like data transfer to the display,
this is problematic as it might block high-frequency actions like
USB or input events.
Hence, make it configurable to be preemptive, and rename it to match the
similar Kconfig values like CONFIG_SDL_THREAD_PRIORITY.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
802.11 doesn't have specific constraints, it just says that listen
interval should be >=0 and it a 2 byte field.
3 as a typical DTIM value from nRF chipsets, so, remove the hardware
specific line and just set a failure.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Listen interval as per 802.11 has units as "beacon intervals" i.e., 1
means 1 beacon interval duration (or short beacon interval duration if
short beacon is enabled).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The prior image was of poor quality, making it difficult to interpret.
Updated the image with a higher-quality version.
Signed-off-by: Dhruv Menon <dhruvmenon1104@gmail.com>
Instead of doing an `irq_lock()`, use per-instance spinlock instead.
Refactored out an unlocked version of `local_irq_is_enabled`
from `riscv_plic_irq_is_enabled()` to achieve that.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Without multithreading only two stacks present: ISR and main.
As any stack they also could overflow, so it make sense to add stack
guard for them also.
Remove stack guard dependency on multithreading and mark
`Z_RISCV_STACK_GUARD_SIZE` bytes at the beginning of stack as read-only
region with PMP entry.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Handle AF_UNIX family sockets for NSOS offloaded driver
Note that the size of struct sockaddr_un is done conditionnaly based on
CONFIG_NET_NATIVE_OFFLOADED_SOCKETS
Also, NET_SOCKADDR_PTR_MAX_SIZE needs to be updated only if
CONFIG_NET_SOCKETS_PACKET is not set. Otherwise, for a AF_PACKET socket,
a struct net_context variable can be corrupted, as local would have be on
16 bytes instead of 20 bytes.
Signed-off-by: Noemie Gillet <ngillet@sequans.com>
To remove CONFIG_PINCTRL from board side for numaker boards.
The Drivers using Pinctrl should be turning Pinctrl on
instead of the responsibility of the board.
Fixes#78619
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
The pull context LwM2M client's set_socketoptions callback is currently
unused and can't be set by a user. Add a public API to set the
pull context's client's set_socketoptions callback.
Signed-off-by: Andi Gerl <andi.gerl@exacttechnology.com>
When larger buffer index was introduced only function:
eeprom_target_write_received() was updated to handle
address-width = 16
This adds the same functionality when buffered API is used,
enabled by CONFIG_I2C_TARGET_BUFFER_MODE.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Updates the GitHub security page with the current supported versions
after the v4.0.0 release.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
When linking and relocations are performed on the ELF object itself
with no copying, also global binding linking can break references.
Disable linking globally for such cases.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The LLEXT linker for Xtensa cannot relocate FLIX commands, disable
them in extensions only until we have a solution. Note, that this
only affects extensions, the main Zephyr binary is still built with
FLIX commands.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Since call this function both in
```C
k_spinlock_key_t key = k_spin_lock(&lock);
bool need_flush = work_flush_locked(work, flusher);
k_spin_unlock(&lock, key);
```
So, there are no flag_get change.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Add `hifive_unmatched//s7` (earlier selected by default, using
`hifive_unmatched`) and `hifive_unmatched//u74` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add `hifive_unleashed//e51` (earlier selected by default, using
`hifive_unleashed`) and `hifive_unleashed//u54` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
According to the RISC-V Instruction Set Manual: Volume II, Version 20240411
(Section 3.1.6.6), some implementations may choose to track the dirtiness
of the floating-point register state imprecisely by reporting the state to
be dirty even when it has not been modified. This option reflects that.
Also add a filter in `tests/arch/riscv/fpu_sharing/` based on imprecise
FPU state tracking
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Switch from `ram0` to `l2lim` in `zephyr, sram` in board DTS
Add `l2lim` in `support/hifive_unleashed.resc` and targets l2lim
as a work-area in `openocd_hifive_unleashed.cfg`
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Remove the renesas,ra-clock-generation-circuit driver, which is no longer
needed after migrating to the FSP-based implementation.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Remove the renesas,ra-pinctrl driver, which is no longer
needed after migrating to the FSP-based implementation.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Since the Option Setting Memory area is set in FSP, the Kconfig value
switches between using the FSP implementation or the existing
Option Setting Memory implementation.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This is generating lots of duplication and unnecessary builds when
multiple arches are being changed. Let's stick to basic coverage which
should be enough for PRs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add additional time defines to round out the `SEC_PER_*` family.
These are easier to type than `SEC_PER_MIN * MIN_PER_HOUR` and
`SEC_PER_MIN * MIN_PER_HOUR * HOUR_PER_DAY`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Mention that CONFIG_NATIVE_APPLICATION &
CONFIG_NATIVE_SIM_NATIVE_POSIX_COMPAT have been deprecated.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This option existed only to make the transition from native_posix to
native_sim easier. As native_posix is going to be removed in v4.2
we deprecate this option now, so it will also be removed.
We also switch this option to default to false already now.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This option is used in tree only by native_posix, which is deprecated
and being replaced by native_sim. But may be used also in out of tree
targets.
As part of the native_posix deprecation, and therefore the lack of
testing this feature would have in the future, we are also deprecating
this option.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This revert the idea of 3fa7d78 from #78845.
The 3rd level IRQ APIs won't compile when
CONFIG_3RD_LEVEL_INTERRUPT_BITS=0.
Updated testcase accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This board has a few issues handled by this PR:
- Fix DTS entries to meet necessary flash partitions
- Fix wrong kconfig entries realted to SoC model
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Do not fail if we can't download any artifacts, i.e. when job is
cancelled.
Only publish on push/schedule
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a compliance test using ruff, for both linting and formatting of
newly added python files.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add simple scripts to convert ruff check and ruff format output to
toml exclude sections.
These sections can be used to ignore baseline violations for an existing
codebase.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Reporting or annotating issues can be done on a range rather than a
single line.
Add support for end line and end column.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Kconfig options for RTT control block initialization and linker
section were added in #53569, however the Zephyr west.yml was not
updated to incorporate the Segger repository changes to make use
of the new Kconfig options.
This fixes that.
Signed-off-by: Bryce Wilkins <bryce.wilkins@gmail.com>
Some nodelabels in the display build_all test overlay lacked a "test"
prefix, causing test failures on boards that also define displays with
this nodelabel. Prefix these nodes with "test" to resolve this issue.
Fixes#81610
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
\verbatim is not giving the right output as we need an inline literal.
Switch to \c instead.
Fixes#81595.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
USBD peripheral automatically handles Set Address command which can
lead to state mismatch between USB stack and the host. Keep track of
device address and issue fake Set Address commands on mismatch.
This fixes default vs addressed state mismatch that can occur due to
sufficently high SETUP handling latency. The state mismatch was most
commonly seen as SET CONFIGURATION failure when the enumeration happened
during periods with increased latency.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Set Address behavior is not specified when wValue is greater than 127,
or if wIndex or wLength are non-zero. USB stack did check wValue and
wLength but didn't care about wIndex value. Extend the check so non-zero
wIndex also results in STALL response.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Request and release global power domain only once during setup
of pins. Request and release involves communication over IPC and
it should be avoided if possible. For example if there are 4 pins
(like in UART) where GPD is requested we can limit number of
request/release operations fourfold.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add a common part for AMD board ACP_6_0_ADSP.
Add support for ACP_6_0_ADSP BOARD,
which represents ACP_6_0 soc.
This has a 1 Xtensa HiFi5 core, with 200-800MHz
1.75 MB HP SRAM / 512 KB IRAM/DRAM,
1 x SP (I2S, PCM), 1 x BT (I2S, PCM), 1 x HS(I2S, PCM), DMIC as
audio interfaces.
Signed-off-by: DineshKumar Kalva <DineshKumar.Kalva@amd.com>
Add UART configuration and pin control. Set state to disabled,
as it serves as alternative to default LPUART0 or as second
uart only.
Signed-off-by: Neil Chen <cheng.chen_1@nxp.com>
Add possibility to retrieve VBUS status of the nPM1300 charger through
its sensor APIs. Updated shields/npm1300_ek sample to use the new API.
Signed-off-by: Sergei Ovchinnikov <sergei.ovchinnikov@nordicsemi.no>
Improve type safety and consistency by adjusting variable and
parameter types to avoid signed/unsigned comparisons and implicit casts.
Moreover, explicit casts were applied when converting from
`size_t` to `uint16_t`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This change marks `w5500_api_funcs`, an instance of
the `ethernet_api`, as `const`.
By using `const`, we ensure immutability, leading to usage of only
`.rodata` and a reduction in the `.data` area.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Changed interrupt priority for GPIO, default 6 is not suitable for
for the ZERO_LATENCY_IRQS function used in this test.
used in this test.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Add CONFIG_GPIO from defconfigs for Infineon boards.
Revert pull/81377, which affect some ble samples which
used GPIO.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
A few bindings in the timer directory (for kernel timing sources) were
being used for counters (which can have alarms set, and have a distinct
API). Move these bindings to the counters directory.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use workflow_call to allow for different type of nodes depending on
event.
On push, we do not need to use zephyr runners, GH runners are enough and
are much faster to deploy and start.
This resolves an issue where push jobs will have to be queued for a
longer time waiting for the prep step, once the prep step is done, we
will have to wait one more time in the queue for requested nodes.
This should speed up execution of push events in CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move publishing data to ES to a workflow_run step. This way we can
change the main workflow to use pull_request instead of
pull_request_target.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Platforms that support mmu require memory page access flags to be set in
both tlb and mmu. Add mmu flag update in sys_mm_drv_update_page_flags
function.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Attempt to invalidate cache for an unmapped address results in cpu
exception for the ptl platform. Perform cache invalidation after
translation activation in tlb. Add address mapping in mmu for platforms
that have it.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
The flags parameter in the sys_mm_drv_map_page function is used, so the
ARG_UNUSED macro invocation is unnecessary. Remove this macro usage to
clean up the code and improvs code readability and maintainability.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Adds support for using relay buffers and advertising set for the subnet
bridge feature, even if the relay feature is disabled.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
In order to support error and warning message coloring
LOG_BACKEND_SHOW_COLOR must be set. Allow setting it for
customized cases.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The variables 'first' and 'next' in function 'stats_buffer_list_first()'
and 'stats_buffer_list_next()' were potentially used uninitialized.
Depending on the compiler and target architecture, this can lead to
different behavior, including warnings or errors when using strict
warning flags.
By initializing these pointers to 'NULL', we ensure consistent and
expected behavior across all toolchains and configurations.
Signed-off-by: Fabian Kainka <kainka@cognid.de>
DCDC regulator on nRF54L may not always works as intended.
Tune the fix addressing that.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
DCDC regulator on nRF54L may not always works as intended.
Apply a fix addressing that.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
To configure APPROTECT on nRF54L15 different set of MDK symbols
must be used. Additionally, nRF54L15 does not support loading
APPROTECT configuration from the UICR in runtime.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Platform capability descriptors such as MSOSv2 or WebUSB BOS have a
vendor request code that is used by the host to perform vendor-specific
requests. Add a convenient way to define and register a platform
capability descriptor with a vendor request node.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Allow the user to register a vendor request node identified by the
vendor code (bRequest) and containing two callbacks to handle the vendor
request. The device stack uses the vendor request node to call the
vendor request callbacks when it receives a request of type Vendor,
recipient Device, and bRequest value equal to the vendor code.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add a function similar to sample_usbd_init_device(), but one that does
not initialize the device. It allows the application to set additional
features, such as additional descriptors.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Currently the dmic_nrfx_pdm read implementation treats a timeout as an
error, in that a logging error message is produced when no PDM data is
available. However, for non-(or minimally-)blocking applications this is
normal behavior. Classified this way, the logger is flooded with error
messages unnecessarily, unless the log level is changed for the dmic
module, which is not desirable.
This modification simply changes the log-level to debug so the
application user can then decide whether or not a failed read needs to
produce an error message.
Signed-off-by: Anthony Wertz <awertz@pm.me>
The nrfx_gppi module is an abstraction over nrfx_ppi and nrfx_dppi
drivers. It now has a Kconfig option that is separate from nrfx_dppi and
by default it enables all PPI/DPPI instances, if available.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The resource reservation definitions were moved to a separate header
file.
The PPIB and DPPI channel and group resources can now be statically
allocated for each individual instance.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The new nrfx_ppib driver can now be enabled, when the corrensponding
device tree node has the okay status.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Added a binding description for the PPIB peripheral and added the device
tree nodes of the PPIB instances to the nRF54L15 and nRF54L20.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The hal_nordic revision was updated to bring in NRFX v3.8.0.
Aligned the uses of single-instance API to use multi-instance instead.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Convert the numerous revision compatibles to a DT property for the
revision called nxp,version (inspired from a linux DT property from
st called st,version on their DMA).
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The tests were using the default of 1 which is very low,
especially when we might have multiple RX streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This moves the SRAM definitions for STM32H56/7x chips up to the top
level since they are common to all of them.
Signed-off-by: Djordje Nedic <nedic.djordje2@gmail.com>
When start to sending proxy advertising, will also process in
send_pending_adv, but the bt_mesh_adv_get_by_tag will directly return
buffer from bt_mesh_adv_queue or bt_mesh_relay_queue, which case
mesh messages sent on different sets, can cause peer replay attack.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
PM_DEVICE_FLAG_ISR_SAFE is an enum and it must be converted to
a bit mask before masking with flags.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
- stm32cO11/31 share the same spi peripheral
- include stm32_dma header to be able to configure
spi with dma config macros (STM32_DMA_PERIPH_TX,...)
in dts
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
There is more native targets than native_sim and native_posix.
Let's exclude them all by architecture.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
add entry in migration guide 4.1 about renaming of compatible from
zephyr,gpio-steppers to zephyr,gpio-stepper
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
This commit fixes incorrect c prototype and defintion of
stepper_set_callback to stepper_set_event_callback
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Ports the Thread-Metric suite of benchmarks from ThreadX to Zephyr.
This makes it easier for others to run these benchmarks with the
best set of configuration options for their board so that
they can better compare Zephyr performance to another RTOS.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The Xilinx AXI DMA Controller is commonly used in FPGA designs.
For example, it is a part of the 1G/2.5G AXI Ethernet subsystem.
This patch adds a driver for the Xilinx AXI DMA that supports
single MM2S and S2MM channels as well as the control and status
streams used by the AXI Ethernet subsystem.
Signed-off-by: Eric Ackermann <eric.ackermann@cispa.de>
Moves several node-specific operations inside the Node class to improve
its encapsulation, remove a monkey patch and access to internal methods
and fields.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
CONFIG_TEST_USERSPACE should select CONFIG_USERSPACE as they
should be enabled together. It is no use to enable userspace
tests without enabling userspace.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both `include/zephyr/dt-bindings/pinctrl/gecko-pinctrl.h` and
`include/zephyr/dt-bindings/pinctrl/gecko-pinctrl-s1.h` define
`ZEPHYR_INCLUDE_DT_BINDINGS_PINCTRL_GECKO_PINCTRL_H_`
to prevent duplicate inclusion.
Changed it to `ZEPHYR_INCLUDE_DT_BINDINGS_PINCTRL_GECKO_PINCTRL_S1_H_`
in `include/zephyr/dt-bindings/pinctrl/gecko-pinctrl-s1.h` side.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Both `include/zephyr/drivers/interrupt_controller/intc_esp32.h` and
`include/zephyr/drivers/interrupt_controller/intc_esp32c3.h`
define `ZEPHYR_INCLUDE_DRIVERS_ESP_INTR_ALLOC_H__` to prevent
duplicate inclusion, so it cannot be properly prevented.
Change to a file path name-based definition.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Both `include/zephyr/drivers/dma/dma_smartbond.h` and
`include/zephyr/dt-bindings/dma/dma_smartbond.h` define `DMA_SMARTBOND_H_`
to prevent duplicate inclusion, so it cannot be properly prevented.
Change to a file path name-based definition.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Passing data by value is more efficient in this context. As such,
revise `poll_out_fn` and `uart_stm32_poll_out_visitor` to accept
the `out` argument by value instead of by address.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Make sure that we cannot connect to IPv4 multicast or broadcast
destination address for a TCP socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is helper is only needed in socket multicast interface selection
where we need to get one address from the interface so that it will
tell (when getsockopt() is used), the interface IPv4 address where
multicast packets will be sent. This is private function which is not
needed in public headers so place the prototype to net_private.h file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Do the selection same way as in IPv6 so that if user supplies
unspecified destination address, the default interface is selected
the same way.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Some of the network tests require that source and destination
addresses are not swapped so allow test to control the address
swapping from the test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If CONFIG_I2C_STATS is enabled, the device state for all I2C controller
drivers must contain the I2C stats. This space is allocated by calling
Z_I2C_INIT_FN as part of the device definition; this is done automatically
when using I2C_DEVICE_DT_DEFINE instead of DEVICE_DT_DEFINE. If space
for statistics is not properly allocated but CONFIG_I2C_STATS is enabled,
an unexpected write to memory outside of the stats region may occur on
an I2C transfer. This commit uses I2C_DEVICE_DT_DEFINE or
I2C_DEVICE_DT_INST_DEFINE for all in-tree SPI controller drivers that do
not already.
Signed-off-by: Dane Wagner <dane.wagner@gmail.com>
Remove unnecessary include in header and source file.
gmtime_r() is an extension to the C library, and therefore one
needs to explicitly ask for its prototype to have it exposed.
This is done by defining _POSIX_C_SOURCE so let's do so.
These two changes fix build errors with some libCs.
Tested with pico, newlib, minimal and the host glibc.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The channel filter and release functions can be used by some
DMA drivers to perform blocking operations (i.e: allocating,
de-allocating channel resources). In such scenarios, the
channel request and release functions become unsuitable for usage
inside ISRs. Drop the `isr-ok` tag and add comments regarding this
behavior being driver-dependent.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This is useful for releasing channel resources "allocated" during
channel request. These resources can refer to enabled IRQs, PDs,
etc...
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This patch defines the message format for AVCTP unit message.
This is the first out of the four types of commands and can be
used by the CT to obtain the unit info from the TG device.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
Only the basic functions for establishing an AVCTP connection
are provided at this stage.
An BR/EDR ACL connection is necessary before AVRCP function.
Register callbacks before utilizing AVRCP.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
This patch add SDP records for both CT and TG role.
The SDP attribute would be registered according to the configuration.
OBEX and Browsing commands are optional and yet not supported.
SDP registration is implemented at AVRCP level to simplify the
workload of the upper layer. We assume the App can have limited
knowledge on SDP structures.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
This patch implementing avrcp.c
New Kconfig BT_AVRCP is provided to enable this layer.
BT_AVRCP_TARGET and BT_AVRCP_CONTROLLER are then
provided to enable one of the two roles independently.
avrcp.h shows the APIs for the upper layer.
Only connection and disconnection interfaces are provided in this patch.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
This patch implementing avctp.c
New Kconfig BT_AVCTP is provided to enable this layer.
avctp_internal.h shows the APIs for the upper layer, i.e., AVRCP.
Only connection and disconnection interfaces are provided in this patch.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
Disable every PLL before configuration. That allows
an application to reconfigure PLLs after a bootloader
configuration.
Don't disable the PLL clock if it is used by (Q|O)SPI
when executing from external memory. That will lead
to a stall.
Note: when (Q|O)SPI runs from PLL, the bootloader
dictates the clock configuration. There is no clock
reconfiguration support for memory map mode in
(Q|O)SPI drivers.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
This commit changes the way some x86 devicetree set the unit-address values
of memory nodes. Before the change, they were always set to `0`. After the
change, they are derived from the `DT_DRAM_BASE` macro to match the first
address specified by the reg property.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Added a flag parameter so that it is possible
to use the bt_cap_initiator_unicast_audio_stop to perform
disable+stop without releasing the streams by setting the
RELEASE flag.
This allows us to use the bt_cap_initiator_unicast_audio_stop
function to just disable streams without releasing them,
as that is requested by some PTS tests such as
CAP/INI/UST/BV-40-C.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Zephyr SDK 0.17.0 adds the toolchain for the Intel Audio DSP
ACE 3.0 platforms. We can now add the bits to enable building
the boards with SDK 0.17.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Amend the filtering so that the normal mem_map (with exec) test
is not going to run on Intel Audio DSP SoCs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With the rename of intel_adsp/ace30_ptl to intel_adsp/ace30/ptl,
the "sim" variant no longer inherit the base configuration. So
make a copy of the .conf file to explicitly target the sim
variant.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
some flashes support special opcodes
for 4-byte addressing, that can be used
without switching to 4-byte mode.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Increase the conn interval from 30 to 60 for more stability
in test with multiple lower testers (up to 3).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
ARGB8888 values all had alpha '0x00' (=transparent).
Changed them to '0xFF' and added a transparency test patch in the middle
of the screen.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Non-alpha colors were converted to colors with `0x00` alpha, which makes
them fully transparent.
The correct way would be to add a `0xff` alpha, which this change does.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
While the driver was already capable of processing `ARGB8888` data,
it did not actually show the alpha value in any way.
This change adds a checkerboard background that shows transparent
regions.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
`lv_task_handler()` returns a `uint32_t`, but `k_msleep` takes a
`int32_t`.
If no timer exists, `lv_task_handler()` returns `UINT32_MAX` to indicate
that we should wait forever. However, this gets auto-cast to `-1`,
indicating to `k_msleep` to not wait at all, creating a busy loop.
Hence, a clamping to `[0, INT32_MAX]` is required.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Adds a sample that renders the simple `hello world` LVGL demo
with a transparent background, to demonstrate ARGB8888 framebuffer
capabilities.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Any request 5 did set the address even if it's a non standard
request like vendor specific requests.
Signed-off-by: David Schneider <schneidav81@gmail.com>
Netcat (nc) does not handle SIGINT. It silently ignores it.
We cannot use run_client(), given that the pydoc for
run_client() specifically contains "Run a client that
handles SIGINT".
Instead, use check_call(), which correctly handles Ctrl+C.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This adds a new kconfig for eviction algorithm which needs page
tracking. When enabled, k_mem_paging_eviction_add()/_remove()
and k_mem_paging_eviction_accessed() must be implemented.
If an algorithm does not do page tracking, there is no need to
implement these functions, and no need for the kernel MMU code
to call into empty functions. This should save a few function
calls and some CPU cycles.
Note that arm64 unconditionally calls those functions so
forces CONFIG_EVICTION_TRACKING to be enabled there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Alder Lake have at least 2 cores. Both boards using this SoC
(up_squared_pro_7000 and adl) are configured with
MP_MAX_NUM_CPUS=2, so dts should contain at least one more core.
Signed-off-by: Franciszek Pindel <fpindel@antmicro.com>
This fixes#78721 which was introduced in PR #44686, which changed (and
renamed) `adv_new_legacy`/`adv_get_legacy` to return an existing
`bt_dev.adv` if it existed. This caused a problem, where the existing
adv then would be used to start advertising, and if this fails (because
the adv is already advertising, for instance), `bt_le_adv_start` would
erroneously delete the adv, making the host lose the context for the adv
which still is advertising.
Before PR #44686, this would not happen, because `bt_le_adv_start` would
return early when `adv_new_legacy` returned `NULL` and never reach the
delete call.
I have refactored this to make responsibilities a bit more clear:
`adv_create_legacy` now does 1 thing: create an ext adv and assign as
the legacy advertiser. This mirrors `bt_le_adv_delete_legacy` which does
the opposite. I have implemented error codes to match the behavior that
PR #44686 was made to implement.
Signed-off-by: Ludvig Jordet <ludvig.jordet@nordicsemi.no>
The patch modifies the "Programming and Debugging" and "Flashing" sections
to make the documentation clearer and consistent with what is reported for
other ST boards.
Suggested-by: Abderrahmane Jarmouni <git@jarmouni.me>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
The building and flashing of the drivers/display and subsys/display/lvgl
examples confirmed that the LTDC peripheral is supported.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
The commit e17e54c48f ("boards: stm32: add flashing with stm32cubeprog
for all") did not update the documentation regarding the flashing
section, which no longer uses the OpenOCD runner by default.
Fixes: e17e54c48f
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
After we take the true MTU into account, we need to send proper
number of bytes (multiple of 8) in one IPv6 fragment.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If PMTU is enabled, then use the MTU value from it instead of always
using network interface MTU.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Shorten the timeouts so that the tests are run in 6 second instead
of 15 seconds.
Use only native_sim for the tests so that the tests are run without
any extra delays.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If PMTU is enabled, then use the MTU value from it instead of always
using network interface MTU.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IPV6_MTU IPv6 socket option and implement getsockopt() and
setsockopt() calls for the option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IP_MTU IPv4 socket option and implement getsockopt()
call for the option. The IP_MTU option does not support
setsockopt() call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Send a network management event for a changed path MTU value.
Both IPv4 and IPv6 have their own events as we cannot mix these
because how the network event numbering space is implemented.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Catch "Destination Unreachable" ICMPv4 messages and update PMTU for
a given destination IPv4 address.
Use that PMTU when sending data to the destination.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Show information whether PMTU is enabled or not.
Show pmtu destination cache content with "net pmtu"
command. The "net pmtu flush" can be used to clear the
cache.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Catch "Packet Too Big" ICMPv6 messages and update PMTU for
a given destination IPv6 address.
Use that PMTU when sending data to the destination.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print more cases when the packet is dropped, and also print
the upper layer verdict for the packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This adds generic code that can be used by both IPv4 and IPv6
Path MTU Discovery mechanism. The actual PMTU support for each
protocol family is in subsequent commits.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The `arch_proc_id()` returns the hartid of a CPU, which may not start
from zero. The way that it's used as an index to access `save_irq[]`
array is wrong, use `arch_curr_cpu()->id` instead.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Previously, twister would fail due to a warning being escalated to
an error because CONFIG_NET_TEST was set.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Test was marked build only with filters in each scenario looking for
sdl-dc which is only available on native_sim, so cut the chase and use
platform_only to narrow things down to native_sim directly instead of
building the world to get information we already know.
reduces build/run time from 78s to 17s on invocation of twister with
default options, saves a ton more when running twister with --all.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Implement a new stable-poll-period-ms property to specify a new (slower)
polling rate for when the matrix is stable.
The keyboard thread can eat up a surprisingly high amount of cpu cycles in
busy waiting if the specific hardware implementation happen to have a
particularly slow settle time, but high frequency polling is really only
needed when debouncing.
The new property allow slowing down the polling rate when the matrix is
stable (either key pressed but none to be debounced or idle in the case
of the gpio implementation with no interrupts), this allows reducing the
overall cpu time taken by the keyboard scanning thread when keys are
persistently pressed.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Changes the implementation of `bt_gatt_is_subscribed` to use the
attribute read method instead of casting the user data pointer when
extracting the CCC Attribute Value.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Refactors `bt_gatt_is_subscribed` by changing a CHECKIF to an if
statement to avoid undefined behavior if CHECKIFs are "disabled".
Uses sizeof(a uint8_t) instead of 1 to avoid magic numbers.
Initializes `properties` to 0 to avoid undefined behavior.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
This commit enables the TPIU clock source in Apollo3 and
Apollo4 soc initialization if LOG_BACKEND_SWO is used.
Signed-off-by: Aaron Ye <aye@ambiq.com>
This commit defines the default pinctrl of ITM for Apollo3 and
Apollo4 EVB. Also configures the default SWO frequency.
Signed-off-by: Aaron Ye <aye@ambiq.com>
-fuse-ld=lld is currently specified twice through the baremetal property
(in cmake/linker/lld/linker_flags.cmake) and TOOLCHAIN_LD_FLAGS (in
cmake/linker/lld/target.cmake). This doesn't really harm anything as
it isn't duplicated on the link line (and specifying it multiple times
wouldn't hurt even if it was), but it also doesn't really help anything.
-fuse-ld isn't baremetal-specific and setting it via TOOLCHAIN_LD_FLAGS
will cover this case anyway, so remove this duplicate.
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
What is changed?
Use CMSIS SystemCoreClock via a dedicated flag instead of using
soc flags.
Why do we need this change?
This change is part of cleaning soc specific code out of arch folder.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
The default policy currently directly references the private
variable next_event from policy_events.c to then convert the cycle
of said event (if exists) to a kernel tick in the future, something
policy_events.c already implements and exposes through
pm_policy_next_event_ticks().
Additionally, the implementation of pm_policy_next_state() in
policy_default.c already gets the nearest kernel tick, wherein
the next event has already been accounted for in, see
implementation of pm_system_suspend().
This commit removes the redundant and layer violating computation
if the tick of the next event from policy_default.c and updates
the test test_pm_policy_events to not use default policy to
determine if pm_policy_next_event_ticks() is correct.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The short sleep (10ms) was not enough any more. Increase the sleep
to 100ms so that system stabilizes between checks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print information in "net ipv6" command how the SLAAC addresses
are generated. There is the default legacy EUI-64 method (RFC 4862) or
the stable method described in RFC 7217.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add tests that verify that stable IIDs generate a proper IPv6
interface identifier described in RFC 7217.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This implements support for RFC 7217 which describes a method
to have stable IPv6 Interface Identifiers to be used with IPv6
Stateless Address Autoconfiguration (SLAAC). The stable IIDs are used
to provide enhanced privacy so that an IPv6 address configured using
this method is stable within each subnet, but the corresponding
Interface Identifier changes when the host moves from one network
to another. This method is meant to be an alternative to generating
Interface Identifiers based on hardware (MAC) addresses,
such that the benefits of stable addresses can be achieved without
sacrificing the security and privacy of users.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
- Refactoring of the cmake code so LinkServer can be invoked with the
correct switches.
- Documentation update
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
LinkServer manages port numbers for gdb and semihost as separate linear
sequences when invoked to debug multi-core applications, e.g the
gdb-server instance for cpu0 will have the default GDB port 3333 and the
next gdb-server instance will be assigned the port 3334. The latter will
conflict with the default port for semihost which is 3334.
This patch changes the default port for semihost to 8888.
Port numbers can be changed when invoking the linkserver runner.
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
The alloc_buf callback is not used when `seg_recv` is set, so it is
never called in this test. Remove it.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Allowing an invalid address to be "freed" when asserts are disabled
is dangerous and can lead to a very hard class of bugs (and potential
security issues) to troubleshoot. This change always validates the
address before adding it to the free list and calls k_panic() if
asserts are not enabled.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
Due to addition of busy threads running on other cores, and
the simulator runs in single thread bouncing through all cores,
we are wasting quite a bit of time just busy waiting. This makes
each simulator run too long for CI. So limit CPU number to 1.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Native builds uses system libraries per default.
Instead of handling this in each linker_libraries.cmake files, then the
check for native build is moved one level up and for native build a
dedicated linker_libraries_native.cmake is sourced.
This simplifies the linker_libraries.cmake files as they no longer need
to check for native builds.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The property based toolchain integration allows a cleaner design by
letting the toolchain define its properties and values and let CMake
implementation of Zephyr provided C and C++ libraries adjust those
properties when minimal C or C++ libraries are used.
This commit moves handling of C++ linker library properties into
the minimal C++ CMake implementation.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Now that section header cache is persistent, it can be used for
finding sections. Add a new function, similar to llext_find_section()
to use it and deprecate llext_find_section().
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Move cached section headers to struct llext from struct llext_loader
to preserve them after llext_load() returns.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Currently when building LLEXT for Xtensa we use the -fPIC compiler
option, but this cannot be used when using detached sections in
extensions. Add a Kconfig option to switch between the two
compilation modes and switch -fPIC off when building relocatable
(partially linked) ELF binaries.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
When detached sections are used, STB_GLOBAL relocations also have to
be processed depending on the relocation type. This commit unified
STB_GLOBAL and STB_LOCAL flows by making them use the same relocation
type parser, adds support for R_XTENSA_GLOB_DAT and R_XTENSA_JMP_SLOT
type relocations on Xtensa and fixes STT_SECTION address calculation
for such sections.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Detached sections are used in situ without being copied to or
referenced from ext->mem[] LLEXT region arrays. Their caches must be
synchronised accordingly.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The newest AN1760 application note - Revision F (DS60001760G - June 2024)
is recommending to not write the node count to PLCA_CTRL1 register when
the node is not the PLCA coordinator (i.e. its ID is not zero).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This patch brings update of the procedure to initially configure the
LAN865x devices. It follows setup guidelines from newest AN1760 [*].
The values from "TABLE1" on the [*] must be written to the device in the
indicated order with recommended values.
This was not the case previously, as first values from in-flash allocated
(const) table were written and only afterwards calculated configuration
parameters (cfgparams) were updated.
With this patch the lan865x_conf[] table is allocated in-RAM, so
placeholder values can be updated and it can be written at once at the
end of configuration process.
Its single entry has been reduced from 8B to only 4B. Moreover, moving
it out of flash saves 512B of flash memory.
Note:
[*] - AN1760 Revision F (DS60001760G - June 2024)
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Update FAE table type from array of uint8_t to int8_t. From Vol 6.0,
Part B, section 2.4.2.52: "The ChFAE field contains the per-channel
mode-0 FAE table of the local Controller. Every per-channel mode-0
FAE value is represented by an 8-bit signed integer"
Signed-off-by: Adam Cavender <adam.cavender@nordicsemi.no>
CONFIG_ENTROPY_DEVICE_RANDOM_GENERATOR is on
by default, if the device supports that, so there is no need
to enable it explicit.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
use auto init for networking, dhcp and sntp.
This simplifys the code of this sample by using the
auto init feature of the networking stack.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
The it8xxx2_kbd KSO pins can be used as both keyboard scan and GPIO. By
default the keyboard scanning driver controls the output level of all
the KSO signals from 0 to (col-size - 1), meaning that any line in
between used as GPIO is going to have its output value overridden.
Add a kso-ignore-mask property to the keyboard scan driver to allow
specifiying extra pins that should not be controlled by the driver.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
For SIGEV_SIGNAL, the function zephyr_timer_wrapper() is the handler
between kernel and posix layer.
Here, for one-time timer, reload is equal to 0 and function returns.
As a consequence, handler function was never called.
Signed-off-by: Noemie Gillet <ngillet@sequans.com>
The tx fifo empty interrupt is a edge driven interrupt, so if it
is already empty then and the interrupt is enabled, it will not
fire so the isr needs to be triggered manually for the callback.
This also removes the unnecessary interrupt locking in the isr and
removes the receiver timeout interrupt.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Refined `can_sja1000_read_frame` and `can_sja1000_write_frame` by
reducing `frame->id` pointer dereferences.
Using a local `id` variable aims to improve efficiency, given
the frequent execution of this code in CAN applications.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
bt_conn_le_create logs an error if the provided conn is
not NULL. This small change cleans up the log a bit to
avoid the warning.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Everything else is defined as hex, so it makes sense to
be consistent. This will also make it easier to find the
service IDs in the logs that primarily already log
commands and events as hex.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since the values are defined as hex, e.g. 0x82, it is easier
to compare with the log if they also log them as such.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixed typo in Renesas RA8 SCI_B UART configuration that was preventing
hardware flow control from being enabled.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Obviously, everyone knows that there are 8 bits per byte, so
there isn't a lot of magic happening, per se, but it's also
helpful to clearly denote where the magic number 8 is referring
to the number of bits in a byte.
Occasionally, 8 will refer to a field size or offset in a
structure, MMR, or word. Occasionally, the number 8 will refer
to the number of bytes in a 64-bit value (which should probably
be replaced with `sizeof(uint64_t)`).
For converting bits to bytes, or vice-versa, let's use
`BITS_PER_BYTE` for clarity (or other appropriate `BITS_PER_*`
macros).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
* Add CONFIG_OPENTHREAD_PLATFORM_MESSAGE_MANAGEMENT to allow enabling
message management by the platform.
* Add implementation of `otPlatMessagePoolInit`, `otPlatMessagePoolNew`
and `otPlatMessagePoolFree`.
Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no>
Add a new snippet to enable serial console. Even though most Zephyr
boards enable this by default, the same is not true for many real
boards, where enabling UART can increase power consumption. Having
this snippet may become handy on such scenarios. We could also
consider cleaning up upstream boards by just enabling this snippet
by default.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
- Title underline too long
- Remove redundant how-to-use snippet bit, this can be documented
generically for all snippets instead of repeating it everywhere.
- Snippet does not redirect anything.
- RTT does not require HW support for console.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
There's no point in disabling serial when enabling RTT. They are
not incompatible between each other.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
rpi_pico.conf only adds CONFIG_ADC=y which already exists in the
prj.conf so it's redundant and can be removed.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
Move the initialization of the priority q for running out of sched.c to
remove one more ifdef from sched.c. No change in functionality but
better matches the rest of sched.c and priority_q.h such that the
ifdefry needed is done in in priority_q.h.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
To support checking for sorted blocks of multi-line text add
an optional regex pattern for the KeepSorted compliance check.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Openocd target cyw20829 does not define _TARGETNAME which is used by
default by the openocd west runner when using CONFIG_DEBUG_THREAD_INFO.
This is similar to the issue previously addressed for STM32H7:
Link: https://github.com/zephyrproject-rtos/zephyr/issues/45778
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Web browsers don't support HTTP Upgrade mechanism to upgrade to HTTP2.
Instead, HTTP2 is supported only over TLS, and ALPN is used to negotiate
the protocol to be used.
This commit adds the supported HTTP protocols to the ALPN list, so that
web browsers can use HTTP2 with the server.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Add a cmake file which uses the cmake options feature
and include it inot the sca.cmake file to set up and describe
the options for the ECLAIR tool.
Signed-off-by: Simon Hein <Shein@baumer.com>
Add the ECLAIR calls for the zephyr cmake environment to call
ECLAIR while the firmware is build by replacing the actual compiler
call and setup the eclair environment and call the compiler through
the eclair.
The Integration accepts a kconfig file for configuring the
analysis and the generation of the reports. The path of the
kconfig file should be provided via the variable ECLAIR_CONFIG.
db_generation.ecl has be created and introduced instead of
reports.ecl because the report generation is handled by the
sca.cmake directly.
Signed-off-by: Simon Hein <Shein@baumer.com>
Add the Eclair configuration files, which are needed to
configure the static code analysis tool for the zephyr
coding guidelines.
Signed-off-by: Simon Hein <Shein@baumer.com>
Add MAX78002EVKIT board.
For more information about this board please check
https://www.analog.com/
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
MAX78002 SoC has IPLL and EBO clocks. Added these clocks for MAX78002.
Updated ERFO clock with '_OR' option because MAX78002 doesn't have it.
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Without this change, `get_maintainer.py path ...` did not return a SiM3U
specific maintainer information when querying for
include/zephyr/dt-bindings/pinctrl/si32-pinctrl.h.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The production version of the nRF54H20 SoC is now available, so remove
the initial Engineering B (EngB) preview version.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The nRF54H20 Development Kit version 0.8.0 is no longer supported, given
that they should have all been replaced by 0.9.x.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make it possible to enable Wake-up End Device feature with
CSL receiver disabled (to receive wake-up frames on MED).
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Add Kconfig option `OPENTHREAD_WAKEUP_COORDINATOR` to enable
the Wake-up Coordinator role. Implement API to set Coordinated
Sampled Transmitting sample time and period for a driver that supports
`IEE802154_OPENTHREAD_HW_CST` capability.
The feature is be enabled on with ieee802154_nrf5 driver with option
by setting default value of CONFIG_IEEE802154_NRF5_CST_ENDPOINT.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Co-authored-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The new Kconfig option `IEEE802154_NRF5_CST_ENDPOINT` is added.
When it is enabled, then capability `IEE802154_OPENTHREAD_HW_CST`
is supported by the ieee802154_nrf5 driver and allows to set the
CST period and CST expected transmission time point.
This feature is an OpenThread-specific extention to the
ieee802154_nrf5 driver.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Co-authored-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The new capability `IEEE802154_OPENTHREAD_HW_CST` is added.
The option MAY be implemented as an extension to IEEE 802.15.4
drivers allowing to inject CST related Information Elements.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Co-authored-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
To ensure payloads are delivered in time for the first subevent
in framed BIS, ISOAL now enforces a (configurable) margin of
the calculated time offset
Without this margin, it has been observed that a broadcaster
can end up consistently missing the first subevent in every third
event in a 7.5 ms ISO with a 10 ms SDU interval
The margin is a conservative 2 ms by default, but can likely be
set a lot lower for most implementations and HWs
Signed-off-by: Troels Nilsson <trnn@demant.com>
Adds compiler flag(s) and some architecture-specific relocations
for ARC. No userspace support, doesn't support all relocations.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Common RTC counter driver for MAX32xxx MCUs.
Time of day alarm is used to generate interrupt.
The resolution of time of day interrupt is 1Hz.
Subsecond alarm interrupt not works it does not meet
zephyr counter driver requirement, so that not used.
To use as wakeup source wakeup-source parameter shall be
defined as below
&rtc_counter {
status = "okay";
wakeup-source;
};
Co-authored-by: Okan Sahin <okan.sahin@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Added pmod_serial and pmod_header node labels to EK-RA8M1 device
tree board definition, allowing compatible shield boards to be used.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Fixes: #78010
This commit adds the "Gateway Advertisement and Discovery" process
to the MQTT-SN Publisher Sample application.
Signed-off-by: Kenneth Witham <kennywitham4@gmail.com>
Fixes: #78010
This commit adds tests for the "Gateway Advertisement and Discovery"
process. This includes tests for handling SEARCHGW, GWINFO, and ADVERTISE
as well as manually adding a Gateway for use. Gateway pruning when
missing ADVERTISE messages is also tested.
Signed-off-by: Kenneth Witham <kennywitham4@gmail.com>
Fixes: #78010
This commit implements the "Gateway Advertisement and Discovery" process
defined in section 6.1 of the MQTT-SN specification.
This includes breaking changes to the transport interface and the default
included UDP interface implementation as support for UDP multicast
messages is added as implemented by the Paho MQTT-SN Gateway.
Signed-off-by: Kenneth Witham <kennywitham4@gmail.com>
This follows update of UTCPD.VBSCALE register field. It supports:
- "divide-20": External VBUS voltage divider circuit should be 1/20
for EPR application. The divided voltage compares with
200mV to set or clean VBUS Present bit.
- "divide-10": External VBUS voltage divider circuit should be 1/10
for SPR application. The divided voltage compares with
400mV to set or clean VBUS Present bit.
Signed-off-by: Chun-Chieh Li <ccli8@nuvoton.com>
Nordic SoCs implement an event system, for which the system can
optimize for low latency/high power or low power.
Add soc level implementation of reference counted API which will
optimize for low latency if any part of the system requires it.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add a driver for the MB85RSM1T FRAM chip.
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The HAL configuration binding can be done dynamically based on the
IP's address space. The `hal-cfg-index` property is more tied to
software rather than hardware so remove it as an attempt to clean
up the binding.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Add USB node to apollo4p and apollo4p_blue qualifier, and apollo4p_evb
and apollo4p_blue_kxr_evb board to enableUSB support on the MCU and
its EVB.
Signed-off-by: Chew Zeh Yang <zeon.chew@ambiq.com>
These samples demonstrate how to use the bluetooth 6.0 channel
sounding APIs. A basic distance estimation algorithm is included.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
Before that fix the names for UDMA could be misleading.
With that fix the namespace is clear and easy to follow.
Same applies for peripheral addresses and pad config.
Signed-off-by: Sven Ginka <s.ginka@sensry.de>
Add npcm miscellaneous device control and power and clock control
instances.
Add device tree bindings for npcm power and clock control.
Signed-off-by: Alan Yang <tyang1@nuvoton.com>
Add npcm clock control driver.
Signed-off-by: James Chiang <cpchiang1@nuvoton.com>
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Signed-off-by: Alan Yang <tyang1@nuvoton.com>
Add initial support of the mailbox driver based
on the inter VM shared memory mechanism similar
as the existing IPM driver.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Gives an example where the timeout value is 15seconds,
the prescaler of 8 can let the LPTIM count from 0 to 16 seconds
with LSE
Signed-off-by: Francois Ramu <francois.ramu@st.com>
With this change, the LPTIM counter will be able to set
its timeout to the st,timeout value. So that system can
sleep for that period without interruption.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Filters already only allow arm and native, so exclude everything else
very early and reduce churn and build time.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Filters already only allow arm and native, so exclude everything else
very early and reduce churn and build time.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Replace the enum for load modes for the iCE40 with a boolean flag,
as there are only two options:
- SPI: default, which should be used whenever possible
- GPIO bitbang: workarorund, in case a low-end microcontroller is used
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Flags added allow keeping a pin as input/output by not disabling
the output buffer when configuring it as an input and by not
disabling input enable when configuring it as output. This can
be useful to implement signal diagnosis or for testing purposes.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Added empty fp register structs for ARM combinations not handled,
i.e. any ARM without a fpu.
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
This commit adds the bt_hci_driver.close function for Ambiq
Apollo3x SoC. Also update the hal_ambiq revision including
the necessary support.
Signed-off-by: Aaron Ye <aye@ambiq.com>
If a gateway is not set for a interface,
also log the destination address.
Also print the interface index instead of the
interface pointer.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Log the address and the err/reason values in the connected
and disconnect callbacks.
Since these values are not part of the BTP events it is
difficult to follow the order and reason why disconnects
happen when debugging.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the EXECUTION_TIMEOUT (real time timeout at which the test
will be killed), so we have more margin for CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Increase the EXECUTION_TIMEOUT (real time timeout at which the test
will be killed), so we have more margin for CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Increase the EXECUTION_TIMEOUT (real time timeout at which the test
will be killed), so we have more margin for CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The sample had a few off-by-ones in the code, which caused access
to invalid data.
Fixed by setting the right buffer sizes and the right AD length
fields.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When CONFIG_LLEXT_STORAGE_WRITABLE is selected and .pre_located is
set, the BSS section is allocated by the user too, no need to
allocate it internally.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves rwlocks into a singular
testsuite at tests/posix/rwlocks app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves semaphore into a singular
testsuite at tests/posix/semaphores app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
RX FIFO flushing on RXTO event should only be performed when
UARTE peripheral might be disable during inactivity and that
happens when low power modes is enabled or when device runtime
PM is used. Flushing was incrementing flush_cnt which was not
used (flushed data is not copied to the next buffer) which
was causing data loss and invalid RX data length reporting.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Switch from using direct `strtol` calls to `shell_strtol`.
This change leverages the extensive error handling provided
by `shell_strtol`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Since the `fb` pointer is always assigned to `char_fb`, there is no need
for a `NULL` check. Additionally, removed setting `fb->buf` to `NULL` in
`cfb_framebuffer_init` as it will be overwritten by subsequent operations.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Added `len` to store the result of `strlen(str)` to avoid
multiple calls to `strlen` in the `for-loop`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves confstr, sysconf and uname into
a singular testsuite at tests/posix/single_process app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
Fix k_sleep implementation for no multi-threading mode.
Absolute value of timeout expiration was fed to the k_busy_wait()
function instead of delta value. That caused bug like incrementing of
sleep time in geometric progression (while actual function argument is
constant) during program running.
Signed-off-by: Mikhail Kushnerov <m.kushnerov@yadro.com>
In order to compile with C++ exception handling for xtensa, the libgcc
location needs to be known. This change uses the same logic from gcc's
target.cmake to query the compiler for libgcc location and add the lib
to the include list.
Signed-off-by: Mark Inderhees <markind@meta.com>
Due to addition of busy threads running on other cores, and
the simulator runs in single thread bouncing through all cores,
we are wasting quite a bit of time just busy waiting. This makes
each simulator run too long for CI. So limit CPU number to 1.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The sched benchmark is designed for systems with a single
CPU. Otherwise, the timestamps would be wrong when the partner
thread is scheduled on another CPU, i.e. negative values:
```
unpend 63 ready 62 switch -16562 pend 18937 tot 2500 (avg 928)
```
When the system allows for multiple CPUs, spawn a non-preemptible
thread to keep the other CPUs busy.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Adjust default number of test samples which is based on SRAM size.
Test is using 8*TIMER_TEST_SAMPLES and with previous defaults for
the device with 64k RAM it was using 56k of test data leaving only
8k RAM and that was easily not enough. Adjust conditions to
take less samples when SRAM_SIZE is equal to the threshold.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
From some reason, STM32 I2C drivers selected the compilation of
C files of the I2C LL API.
This is actually not required, so remove this dependency.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Add conversion macros from milliseconds to various units.
The purpose of these macros is to make it more clear/easier
for users to set and read values using milliseconds rather
than the various BT units which may be in 0.625, 1.25 or 10ms
units.
This is especially useful when comparing related values using
different units, such as advertising interval (0.625ms units)
and periodic advertising interval units (1.25ms units).
Users will have to be aware that these macros can provide slightly
different values than what is provided, if the provided values
do not match the units.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Include in the list of supported peripherals the UARTE for the
simulated nrf5340
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf5340 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf5340 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf5340 by providing
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The HW models now support this peripheral for these targets.
Let's enable them.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Include in the list of supported peripherals the GPIO
and GPIOT for both the nrf5340 and nrf54l15
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test by providing an overlay for the nrf5340bsim
Both for the app and net core.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test, and provide overlays, in the nrf5340bsim
Note this test specs 2 GPIO pins to be shorted. This can be done
for the simulation target by calling zephyr.exe with the option
`-gpio_conf_file=shorts_config.txt`
Where that file would contain this one line (for the provided overlay),
for the cpunet:
---- shorts_config.txt
short 1.1 1.2
----
And this for the cpuapp:
---- shorts_config.txt
short 3.1 3.2
----
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test, and provide overlays, for the nrf5340bsim.
Both for the app and net core.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test, and provide overlays, in the nrf54l15bsim
Note this test specs 2 GPIO pins to be shorted. This can be done
for the simulation target by calling zephyr.exe with the option
`-gpio_conf_file=shorts_config.txt`
Where that file would contain this one line (for the provided overlay)
---- shorts_config.txt
short 1.1 1.2
----
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the HW models module to:
aeef3db9fa9e4b9d12b3bbec44f9cedc8fcb7d9c
Including the following:
aeef3db GPIO & GPIOTE: Improve notes and documentation
93549c4 UART: Fix command line parameter description
dbab746 nrf_hack: Add a few missing peripherals
4b1a61b 53 UARTE: Correct subscribe sideeffects function name
197e9cf docs: UART can be used now for 5340 in Zephyr
dc18d14 53: GPIO+TE: Add app core instances
b236c08 GPIO+TE: Add to 5340's netcore
7a621f6 GPIO: Clarify function description
1a2e1e4 GPIO+TE: Build for 54L
d121db4 nrf_gpio hal: Add new nrf_gpio_port_pin_{in,out}put_set
9bc41ce GPIOTE: Connect to DPPI
7141042 GPIOTE: Add simple support for PORT.SECURE & NONSECURE
dc930ba GPIOTE: Support having or not sense functionality per instance
a07180d GPIO: Support multiple GPIOTEs
14bdce5 GPIO: Collect status in single struct
b91da53 GPIOTE: Add support for N interrupt lines
9963424 GPIO & GPIOTE: Generalize to N instances
7379c23 GPIO+TE: Fix indentation
8d691c6 Add SPU registers stub
dd68ca9 Add NFCT register stub
cf2cc5b HW_models: NHW_NVMC: fix buffer read validation
f3db727 zephyr: module.yml: add `depends` field
09fc98f CMakeLists: remove trailing whitespace
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Refactor out the `soc_early_init_hook()` function from `pma.c` to
`soc.c` which is always compiled so that it can be extended to run
other init functions easily in the future. Then, restore the function
in `pma.c` to `pma_init()`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The function `pma_init_per_core()`, as its name suggest, should be
run from every core, so call it from `soc_per_core_init_hook()`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Allow SoC to implement their custom per-core initialization function by
selecting `CONFIG_SOC_PER_CORE_INIT_HOOK` and implement
`soc_per_core_init_hook()`.
Signed-off-by: Maxim Adelman <imax@meta.com>
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The `soc_per_core_init_hook()` function now has `void` type after
da118b9, so it should just return without any value.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This will help distinguish 64 and 32-bit platforms by tooling, following
the pattern visible in e.g. RISC-V.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
Those dtsi are a base for a range of 32-bit platforms. Setting this
compatible makes it easier to distinguish all 32-bit x86 platforms.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
y
atom.dtsi enforces "intel,x86", but it doesn't help us discern if the
platform is 32 or 64-bit. We do that for example in RISC-V and it's
useful from the tooling perspective.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
This commit updates the SSP driver to use the newly defined
SSP_IP_VER macros for IP version checks instead of relying
on CONFIG_SOC_* macros. The change ensures better readability
and maintainability by centralizing the IP version definitions
and comparisons.
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
Replace hardcoded register addresses and values in
asm_memory_management.h with Devicetree (DT) macros for LPSRAM
power-down operations. This change ensures that register addresses and
bank counts are dynamically obtained from the Devicetree, improving code
portability and reducing the risk of errors due to manual updates.
- Removed hardcoded LSPGCTL address definitions.
- Updated m_ace_lpsram_power_down_entire macro to use DT_NODELABEL to
fetch LPSRAM bank count and control register address
- Adjusted bit field extraction logic to align with the updated register
information from the Devicetree.
This commit aligns with the ongoing effort to utilize Devicetree for
hardware abstraction and to facilitate easier maintenance and updates to
the codebase.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Remove the m_ace_hpsram_power_change macro from asm_memory_management.h
as it is no longer used after refactoring the power_down function to
utilize the new m_ace_hpsram_power_down_entire macro. This cleanup helps
to reduce code complexity and maintainability.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Refactor the power_down function to utilize the newly introduced
m_ace_hpsram_power_down_entire macro for shutting down the entire
HPSRAM. This change simplifies the power-down process by replacing the
previous segment-based power gating mask approach with a single boolean
flag that indicates whether the entire HPSRAM should be disabled.
The function signature of power_down has been updated to accept the new
boolean flag, and the corresponding call sites have been modified to
pass the flag based on the CONFIG_ADSP_POWER_DOWN_HPSRAM Kconfig option.
Additionally, the assembly code has been cleaned up to remove the
now-obsolete hpsram_mask array and related logic.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Introduce a new assembly macro, m_ace_hpsram_power_down_entire, which
utilizes Zephyr Devicetree macros to power down the entire HPSRAM on
Intel ADSP ACE platforms.
This macro dynamically retrieves the HPSRAM bank count and control
register address from the Devicetree, streamlining the power-down
process. The macro is designed to iterate over all HPSRAM banks and
issue a power down command to each, ensuring a complete shutdown of the
HPSRAM when required by the system's power management policy.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This commit introduces the L2 Memory Capabilities (hsbcap) register node
to the Devicetree specifications for Intel ADSP ACE platforms. The
hsbcap register provides information on the general capabilities
associated with the L2 memory, which is critical for system
configuration and resource management. The hsbcap node has been added to
the Devicetree source files for ACE 1.5 (MTPM), ACE 2.0 (LNL), and ACE
3.0 (PTL) platforms.
In addition, the DFL2MM_REG macro in adsp_memory.h has been updated to
use the Devicetree node label for hsbcap, ensuring a consistent and
maintainable approach to accessing this register across the codebase.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This commit improves the readability of the power_down.S assembly file
by standardizing the indentation of the preprocessor definitions.
No functional changes have been made; this is purely a cosmetic update
to the code formatting.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This commit addresses an issue on platforms with an MMU where a
LoadStoreTLBMissCause exception occurs when accessing hardware registers
during the power-down process. The exception arises when attempting to
access the IPC register after HPSRAM has been powered down, leading to a
double exception: LoadStoreTLBMissCause followed by
InstrPIFDataErrorCause.
To resolve this, we preload the IPC register before shutting down
LPSRAM. This change prevents the double exception by ensuring that the
page table entries are correctly managed in the TLB before HPSRAM is
powered down and allowing the power-down sequence to complete
successfully.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
ADR status and devtime updated flags merged into an atomic bits array.
Related to Issue #55072
Co-authored-by: Jan Kowalewski <jkowalewski@cthings.co>
Signed-off-by: romain pelletant <romain.pelletant@fullfreqs.com>
Signed-off-by: Jan Kowalewski <jkowalewski@cthings.co>
Change downlink callback to transport data using flags.
Related to Issue #55072
Co-authored-by: Jan Kowalewski <jkowalewski@cthings.co>
Signed-off-by: romain pelletant <romainp@kickmaker.net>
Signed-off-by: Jan Kowalewski <jkowalewski@cthings.co>
Add definition for the Adafruit Adalogger Featherwing. This shield
compatible with the Adafruit Feather family is equipped with an SD card
slot and a PCF8524 RTC.
This work is based on the Adafruit Data Logger shield definition.
Signed-off-by: Philip-Dylan Gleonec <philip-dylan@gleonec.bzh>
Generate the Tx service request after the symbol is shifted out of the
UART. This is useful when the UART is connected to an RS485 transducer
which has a separate transmit enable gpio/line. Hence it's important
to know when the transmission actually finishes so that the drive
enable line can be disabled.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
In case the LLP wraps we need to re-read the LLPU to make sure we return
the correct value.
Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Add support for realloc (and realloc_aligned) into the multi heap lib,
where the buffer sent in will either be reused (maybe shrinked),
or enlarged by allocating on any of the matching heaps of the multi heap.
Signed-off-by: Meir Komet <mskomet1@gmail.com>
Initial support for M5Statck CoreS3 development board.
Signed-off-by: Zhang Xingtao <zhxt@live.cn>
Co-authored-by: Benjamin Cabé <kartben@gmail.com>
Co-authored-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Extend the ARM M-profile suspend-to-RAM implementation to be compatible
with all versions of the M-profile supported by Zephyr: ARMv6-M, ARMv7-M,
and ARMv8-M Baseline.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Wrap the CPU register save/restore operations (GPR and special registers)
in macros to make core logic simpler to follow. This is also a preparatory
step to introduce ARMv6-M and ARMv7-M support.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Use macros to wrap the interaction between the assembly code and the
struct __cpu_context. This helps making the assembly more readable.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Remove all xPSR-related registers from struct __cpu_context, and the
associated save/restore code in S2RAM code, as they are not needed:
* EPSR and IPSR are read-only - they cannot be "restored"
* Bits N, V, Z, C, V, Q, and GE (if DSP Extension is implemented) of APSR
could be restored, but this is not needed as the AAPCS indicates these
bits to be "undefined on entry to or return from a public interface"
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Use minimized PIO code for 3-wire operation.
Input and output buffers are conventionally stored in bus byte order.
For 16 and 32 bit transfers, this is effectively big-endian, so
txbuf and rxbuf need to be read as such. Those pointers also need
to be declared uint8_t * instead of void *.
In addition, tx_count and rx_count are based on dts, and refer to
whole transfers (8, 16, or 32 bits), not bytes.
Added rpi_pico.overlay to samples/sensor/magn_polling to demonstrate
32-bit word size, and updated the README.rst to make it independent
of the specific sensor.
Clean up compliance check failures.
Fix typos.
Synchronize 3-wire TX and RX cycles.
Simplify state machine synchronization
Minimize SPI bus delay time in 3-wire mode
Move clock delay to PIO code and remove k_sleep
Signed-off-by: Steve Boylan <stephen.boylan@beechwoods.com>
The Adafruit Feather M4 Express is a compact, lightweight
ARM development board with an onboard mini NeoPixel, 2 MiB
of SPI flash, charging status indicator and user LEDs, USB
connector, 21 GPIO pins and a small prototyping area.
Signed-off-by: Teresa Zepeda Ventura <teresa.zvent@gmail.com>
Links and the manufacturer name are updated from maxim to analog.
After the acquisition of Maxim Integrated the documentation
of these devices has been moved to the analog.com website.
Redirects exist, so they are not broken yet,
but we should not rely on that.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Links and the manufacturer name are updated from maxim to analog
for the 1-wire subsystem and the related ds18b20 sensor.
After the acquisition of Maxim Integrated the documentation
of these devices has been moved to the analog.com website.
Redirects exist, so they are not broken yet,
but we should not rely on that.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
If network interface is specified in the DNS server, then send
the queries to the server via the network interface. Print this
information in the server list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to specify a network interface in the DNS server
list. User can append "%" and network interface name to the
DNS server to use this. If the network interface is mentioned
in the server list, then the DNS queries are sent via this network
interface.
For example setting the interfaces like this:
192.0.2.2%eth1
[2001:db8::2]:5353%ppp0
would cause the DNS queries to sent to 192.0.2.1 via eth1 in the first
example, and to 2001:db8::2 via ppp0 in the second example.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If trying to parse a string like 192.0.2.2:80/foobar and
setting the length to 12 which means to parse the IP address
and port, the parsing failed because it used one extra character
from the string. This issue was not present if the input string
was terminated after the port number.
Add a test case to catch this problem.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The commit moves SHA calculation to separate test scenario, so that
it can be run separately from other flash map tests.
This reduces flash wear by not running basic flash map tests each
time different SHA backend is tested.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Remove needless writes/read and erase in flash_area_get_sectors test
scenario, by replacing it with comparison with layout directly obtained
from device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Update the measurement durations for the sht4x sensors
in accordance with the datasheet revision 6.6 (2024-04).
These timings have been updated by sensirion in rev 3 of
the datasheet.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add `len` to store the result of `strlen(addr_arg)` to avoid
multiple calls to `strlen` within the `for-loop` in
`cmd_scan_filter_set_addr`.
While the performance impact may be minimal in a shell context,
storing `strlen(addr_arg)` in `len` ensures a single call,
making the code more predictable and consistent.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
On the new Intel SoC, the "Valid" bit of the Virtual Wire is set only for
Virtual Wires that undergo changes. This behavior differs from previous
generations. Therefore, to maintain backward compatibility, a conditional
check for the virtual wire valid bit is added for processing the virtual
wire level.
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
There were a few cases where CONFIG_BT_BAP_BASS_MAX_SUBGROUPS was
used in structs in the public header files. Unfortunately using
a Kconfig for an array size will cause include issues if the
file is included without the Kconfig being available.
For now add and use a new #define value that will be 0 if
CONFIG_BT_BAP_BASS_MAX_SUBGROUPS is not defined.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use zexpect instead of zassert so that the failed tests do not
stop the test execution but we run all the tests.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The IPV6_JOIN/LEAVE_GROUP corresponds to IPV6_ADD/DROP_MEMBERSHIP
definitions so define the former and add tests for them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The in6addr_any is a global symbol that can be used when any
address (all zero bits) is being referenced.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In case of conflicts when calling bt_id_find_conflict
there was no way to easily determine what conflicted.
This is a rare occurance, but has happened when testing
against PTS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some auto formatters will wrap long lines of code and insert newlines
that are part of function decls outside of arguments. This change strips
out all newlines so syscall typename regex function as expected.
Signed-off-by: Mark Inderhees <markind@meta.com>
'nrf52840dk/nrf52840' is already listed under "generic" 'sample.dap.bulk',
so keeping 'sample.dap.bulk.nrf' has no value. The only difference is
dependency on 'gpio' instead of 'arduino_gpio', but
'nrf52840dk_nrf52840.overlay' references arduino header gpios only.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Turn the assert into an if-statement to ensure that CDONE is always
checked during the configuration of an iCE40.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Add an alternate message output option in which messages are
ended with an additional zero data byte with marker and timestamp.
Can be used to maintain compatibility with certain decoders.
Signed-off-by: Juha Sunnari <juha.sunnari@nordicsemi.no>
This option was replaced with CONFIG_STATIC_INIT_GNU
2 releases ago in 6e977ae2d5
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a struct led_dt_spec to hold an LED device and index pointer, some
initializer and wrapper APIs.
This allows simpler LED usage, such as:
static const struct led_dt_spec led = LED_DT_SPEC_GET(DT_NODELABEL(led0));
led_on_dt(&led);
led_off_dt(&led);
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In order to enable code relocation, we use a custom target
(code_data_relocation_target), and add files we wish to relocate, as
well as which sections should be relocated to the COMPILE_DEFINITIONS
property for the target.
This approach has been fragile, because COMPILE_DEFINITIONS can also be
added to for all targets using `add_definitions`. This means if another
part of the project uses `add_definitions` and
CONFIG_CODE_DATA_RELOCATION is on, a warning will appear about the
"file" not being found. The "file" of course, is just the definition
added by `add_definitions`.
To work around this, switch to overloading the INTERFACE_SOURCES
property. This property should be a bit more robust, because nobody else
will add sources to the code_data_relocation_target.
However, this approach has the downside that the CMake documentation
pstates targets created with `add_custom_target()` (which the
code_data_relocation_target is) do not have an INTERFACE scope for
their sources- so while this approach works, it is not officially
supported by CMake
Fixes#60220
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The newly introduced `frame_incomplete` flag of
`display_buffer_descriptor` needed to be added at several places to
avoid uninitialized memory.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
In frames with multiple writes (officially supported through
`CONFIG_LV_Z_VDB_SIZE`) the display needs to be signalled that the
current frame is over and the content should be displayed.
This allows displays to present the UI without tearing artifacts.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Introduces support for double-buffered/latched displays.
Currently, every write has to be presented to the user immediately,
which negates the advantage of latched displays to prevent frame tearing.
Now, GUI managers can indicate whether the current `display_write` call
is the last call of the frame or not, allowing displays to group writes
to a single present.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Validate that the SBS fuel gauge driver returns the expected values for
negative currents (discharging).
Signed-off-by: Jordan Yates <jordan@embeint.com>
The currently IPI implementation assumes that CLINT exists in the
system, however, that might not be the case as IPI can be implemented
with PLIC that supports software-triggering as well, such as the Andes
NCEPLIC100.
Refactor the CLINT-based IPI implementations into `ipi_clint.c`, and
create Kconfig that selects the CLINT implementation when
`sifive-clint0` exists and enabled, otherwise default to
`RISCV_SMP_IPI_CUSTOM` which allows OOT implementation. This also
makes way for the upstreaming of non-clint IPI implementation later.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The function ina219_set_msr_delay always returns zero, indicating success.
Therefore, the error check on its return value is unnecessary and can be
removed.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Add a new API to cancel just one, or mathing requests,
instead of cancelling all ongoing requests.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
poll() only for sockets that have traffic ongoing or have some lifetime
left.
On socket failures during a poll(), stop listening for the socket.
Application can recover by reconnecting the socket.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When the client fails when parsing the response and we stop proceeding,
we should report that to the application.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Even if we receive duplicate confirmable message, we should still
respond with the Ack. Just don't deliver the second callback.
This is achieved by moving the MID deduplication to after Ack handling.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Return the -errno when zsock_sendto() or zsock_recvfrom() fails, so
rest of the code can deal with return values, instead of separately
comparing errno and return value.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When response is received and handled, don't just clear the structure
but instead mark it as ongoing=false.
So if we later on receive a duplicate response for it, we can still
respond with Ack or Rst.
This is achieved by using release_internal_request() when we don't
expect any response for it and reset_internal_request() when we really
fill up a new request.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
CoAP client should be able to push data through functioning socket
while another sockets is failing or reporting poll() errors.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add testcase where sending Ack to incomming Confirmable message fails.
This should be reported to application as now the server is unaware
that transmission have succeeded, so we cannot thread it as success.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
* Use sys_rand_get() and seed the CoAP library, so our MIDs are
random.
* Set socket events per socket, so we don't accidentally receive
on wrong socket
* Reply with correct tokens
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add definitions for all possible flash and SRAM region sizes for ARMv7
MPU. Also, correct some of the SRAM size checks to use <= instead of ==,
to be consistent with the remainder of the file
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This patch adds support for the size_t %z format specifier to the
dictionary parser.
It's the correct format to use for size_t types in modern C,
but it's not supported in python directly.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
ST ZIO connector is Arduino Uno compatible. Arduino SPI pins are placed on
D10-D13 pins, where D10 is SPI nCS pin. This pin is connected with PD14 of
STM32U5A.
According to schematics of this Nucleo board [1]:
Due to muxing constrainte, the SPI_NSS is not available as an alternate
on this IO, so this pin is affected with an I/O function to do the Chip
Select
This means that software control of GPIO is needed to make use of this SPI
interface on regular SPI signals on Arduino connector. Reconfigure
SPI1 (used as Arduino SPI) interface to account for that.
Note that previously configured PE12 is only available on ST ZIO and ST
Morpho connectors, not on Arduino connector.
Update documentation as well, which was referencing PA4 as nCS signal (used
on some other Nucleo boards).
[1] https://www.st.com/resource/en/schematic_pack/mb1549-u5a5ziq-c04-schematic.pdf
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
- Sets s26ks512s0 flash write-block-size to correct 256KB.
- Optimizes MCUboot partitions to fit the correct write-block-size.
Fixes#80284
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Uses a temporary file for dts output then uses CMake to copy to the
correct file if it has changed. This prevents a ping-pong issue when
sysbuild is used of configuring and building cycle when nothing has
changed and there is sysbuild code which loads in the devicetree
data from an image
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Clarify that one can simulate equally well the nRF54L10 and L05
variants with this target.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This target simulated is reasonably tested.
Let's stop warning about it being experimental.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves barrier into a singular
testsuite at tests/posix/barriers app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
Fix compilation error by specifying usart1 to be used for uart-pipe.
Add a board-specific configuration file to disable the console,
so, the usart1 will be used only for bluetooth and to specify
the BT_HCI_TX_STACK_SIZE.
Signed-off-by: Nidhal BEN OTHMEN <nidhal.benothmen@st.com>
Fix wrong reporting about where testcases were executed.
We have:
INFO - 1130 of 1130 executed test cases passed (100.00%) on 0 out of
total 860 platforms (0.00%).
which is obviously wrong.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
1. Move deprecated items to the deprecated section.
2. Fixed a portion of a sentence that was deleted.
3. Miscellaneous cleanup.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
some entries were not properly put under either
Removed or Deprecated section. This commit
fixes that.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Previously, the anchor for `_POSIX_THREAD_SAFE_FUNCTIONS` was
`posix_thread_safe_functions` but it should have been
`posix_option_thread_safe_functions`.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The #64939 introduced a few convenience function like
rtc_utils_validate_rtc_time. However the PR did not replace all
occurrences which result on a build error. This add the missing
header include to remove a building warning and replace the old
function by the new one.
Fixes#81454
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Let's fix the sample used in the example. The peripheral_hr and
central_hr are meant to be run with each other.
Let's also use the :zephyr:code-sample: directive to refer to the
samples so we get a link.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove unwanted reference link to the section (Usage)
in ARM Coresight Trace Deformatter that shows up in
the main Debugging documentation page, by lowering
the level of (Usage) heading from ##### to *****
The commit also has a typo fix.
Signed-off-by: Ahmed Adel <a.adel2010@gmail.com>
Add entry in "Major enhancements with this release include:" for
stepper device driver subsystem.
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Currently, Twister Statuses are only useful for
the initiated, save for the very basics.
This is in opposition to the fact
that they are the main thing end users take into
account when checking their Twister run reports.
In order to make Statuses more useful for the end user,
a new documentation page has been created,
elucidating the full meaning of all Statuses.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
-Update formatting and contents of index.rst for cy8ckit_062s4
-Update formatting and contents of index.rst for cy8ckit_064s0s2_4343w
-Update formatting and contents of index.rst for cy8cproto_062_4343w
-Update formatting and contents of index.rst for cy8cproto_063_ble
-Update formatting and contents of index.rst for xmc45_relax_kit
-Update formatting and contents of index.rst for xmc47_relax_kit
-Change all instances of "PSoC" to "PSOC" for infineon platforms
Signed-off-by: McAtee Maxwell <maxwell.mcatee@infineon.com>
The STKALIGN mask is not present for CONFIG_ARMV8_M_BASELINE as
well as CONFIG_ARMV8_M_MAINLINE. So filter out that check when
setting the sp for ARM core dumps.
Signed-off-by: Mark Holden <mholden@meta.com>
Remove CONFIG_GPIO from defconfigs for Infineon boards.
Applications, drivers will enable GPIO if need.
Added 'select GPIO' from spi/Kconfig.ifx_cat1
Added 'select GPIO' from wifi/infineon/Kconfig.airoc
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Moved uatr6 to common dts for m4
- cm0 uses uart-5 in ver 0.0.0 and uart-5 in ver 1.0.0 (for
using of Arduino headers).
- cm4 by default uses uart-2 (for ver 0.0.0 and ver 1.0.0)
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
This is added via PRs #79337 and #79263 to automatically check if a
colorbar pattern generated by a camera pipeline is correct or not.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
This updates the documentation of all the LilyGO boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add entry in "Major enhancements with this release include:" for
comparator device driver subsystem.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The linker script for this SoC was not including the LLEXT section
definitions when CONFIG_LLEXT was enabled. This patch adds the
necessary include directive to the linker script and fixes the build
issue identified by CI.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Series 0 does not have the TXIDLE status flag. The closest equivalent is
TXC, but it isn't set until the first transmission completes, and is
therefore not safe to use in PM suspend without also separately keeping
track of whether the driver has ever initiated a transmission. For now,
disable the TXIDLE check on devices that don't support it as a minimal
fix for the observed build error. This is effectively equivalent to
reverting the addition of PM support for these devices only. Since these
devices don't have a low-power system timer implementation anyway, the
lack of PM handling does not hurt anything.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The linker script for this SoC was not including the LLEXT section
definitions when CONFIG_LLEXT was enabled. This patch adds the
missing include directive to the linker script.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add missing anytree package, runners started to fail on it:
../pylib/twister/twisterlib/runner.py:60: in <module>
from anytree import Node, RenderTree
E ModuleNotFoundError: No module named 'anytree'
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a test to make sure that the `gp` global pointer register used for
relative addressing when `CONFIG_RISCV_GP` is enabled can't be
corrupted by a rogue user thread.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Reset the gp on exception entry from u-mode to protect the kernel
against a possible rogue user thread.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Renamed the label of 'ti_tmp116_eeprom@0' node because 'eeprom' label name
already exists in some boards, such as adp_xc7k/ae350, bytesensi_l,
same54_xpro.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
For statistical purposes and to improve over all coverage, report
filtered suites so we can see trends in elasticsearch and act on them.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Espressif contains mcuboot calls for loading image.
This fixes the way assert call is included in that scenario.
Fixes#81351
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Brings in a change in the v4.0-branch branch to limit the targets that
rust tests are run on to those that have been tested. This will avoid a
large number of failure in the nightly build on platforms that aren't
expected to work.
Signed-off-by: David Brown <david.brown@linaro.org>
Flash support for RT1170 EVKB was fixed with cfb7322107 (drivers: flash:
flash_mcux_flexspi: add support for W25Q512NW-IQ/IN). Document this
support in the board page.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `doc` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This reverts commit 0036b8bf21.
The reverted commit causes a compile error with the STM32F2 because
there are some variables used in the file eth_stm32_hal that are
not defined in the HAL module of the STM32F2 series,
such as 'ETH_RX_DESC_CNT' and 'HAL_ETH_MII_MODE'
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Still mark the iface as down after ethernet_init, but then actually
check the link state and initialize carrier appropriately
This fixes the case where, the phy driver doesn't give a callback after
iface init due to the link already being up, there was no change from
the phy driver perspective, so callback wouldn't happen, and therefore
the interface could remain marked as down after boot even if carrier is up.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This commit moves one function before another, to make the diff of the
next commit clearer of what it's doing.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
suite stats were not correct, a mixup between skipped and filtered
suites was leading to inconsistent numbers. This is now fixed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not report status issues as errors, very confusing and developer end
up looking at the wrong thing, instead, treat those as warnings and
count them and report them at the end.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is confusing to report filtered testcases as testcases that were
selected but not exexuted. If they are filtered, then there should not
be considered as selected.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In GCC 14.2.0, the keyvariable in usb_dc_ep_write is detected to be used
before initialization, even though this usage should be safe.
Fix by initializing the key variable to 0, and making the 2 if
statements explicitly checking the same value.
Signed-off-by: Jeremy Bettis <jbettis@google.com>
Fix DMA driver initialization when PM_DEVICE is set.
Don't put PM policy state lock if it is not active.
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
This commit should deal with fixing unbalanced policy state locks.
When PM and PM_DEVICE are declared, default state, policy locks
should be given only when active.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
No significant changes have been made to the SD subsystem since 3.7. Add
a note documenting this for the 4.0 release.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The LVGL pull request was started before v3.7 release but merged
after, so needs to be included in v4.0 release notes. This was an
omission in commit 467f31190e.
Signed-off-by: Josuah Demangeon <me@josuah.net>
The MBEDTLS_PSA_ACCEL_xxx macro means it will not enable the SW/Builtin
implementation of the feature. The PSA_WANT_xxx macro means it will
enable the PSA-API usage of the feature, and can use SW or HW
acceleration. If enable the MBEDTLS_PSA_ACCEL_xxx macros, during
psa_crypto_init, mbedtls_psa_hash_setup will failed, as the macro
MBEDTLS_PSA_BUILTIN_ALG_SHA_512 is undefined. Remove the marco of
MBEDTLS_PSA_ACCEL_xxx can enable maco MBEDTLS_PSA_BUILTIN_ALG_xxx,
and fix the supp_psa_crypto_init fail and Wi-Fi connection failed issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Minimum heap pool should be always set for the board
in order to enable internal drivers/subsystems to work.
It is currently not defined for APPCPU due to typo in
board's Kconfig, possibly causing build failures.
Fixes#81218
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This reverts commit 5e225e0c8b.
Based on #79931 and TSC discussions, it was decided that TinyCrypt
will be deprecated *AFTER* 4.0.
Signed-off-by: Flavio Ceolin <flavio.ceolin@gmail.com>
`chan_type` is defined as a `uint16_t`. This makes checking if it is
< 0 always false. A warning is shown with -Wtype-limits. Remove the
check as it is unnecessary.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The sock_obj_core_dealloc() was not called if close() is called
instead of zsock_close(). This happens if POSIX API is enabled.
Fix this by calling zvfs_close() from zsock_close() and then
pass the socket number to zsock_close_ctx() so that the cleanup
can be done properly.
Reported-by: Andreas Ålgård <aal@ixys.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Apparently, the previous change to fix the chip select only works on
some newer revisions of the LPSPI, and the behavior is different on
older parts like RT. For now put some #ifdef to keep the fixed CS on
MCXN but have the old behavior on RT and other platforms.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This function is only checking for current byte being transmitted.
This patch ensures that function returns `1` until TX is disabled and
no byte is being transmitted.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
ISH SoCs have zero-address memory mapped to I2C0 controller.
Coredump cannot be triggered by zero-address access.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
Corrects an issue that was introduced when the interrupt
locking/unlocking was added to the 'sched' benchmark by
unlocking the interrupts before the context switch done by
k_yield(), but after the call to z_unpend_first_thread().
Fixes PR #81050
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
in commit 1cd37f21f3 the global ram console buffer was replaced
with a pointer. This didn't work with the OpenAMP resource table
anymore (#75656).
Signed-off-by: Simon Maurer <mail@maurer.systems>
Updated manifest to include fix for incorrect display of scan
results when APs have EAP and PMF enabled.
Fixes#80995
Signed-off-by: Karun Kumar Eagalapati <karun.kumar@nordicsemi.no>
Some spi drivers do not allow the send buffer
and receive buffer to be empty at the same time,
if this happens it will cause the spi to be unable
to communicate with the nrf7002, so add the receive
buffer for the discard byte in the spim_xfer_rx.
Fix#80686
Signed-off-by: Hongquan Li <hongquan.prog@gmail.com>
We read/modify/write the CH/SECONDS register at initialisation to clear
only the Clock Halt bit and only if it is set.
The previous implementation zeroes the entire register unconditionally at
initialisation, which wipes the SECONDS fields.
Fixes#77354.
Signed-off-by: Andrew Feldhaus <github@feldhaus.co.uk>
Currently RAMABLE_REGION is used for both virtual address (VMA)
and a load address (LMA). It results in wrong LMA for some platforms.
This commits adds using ROMABLE_REGION for LMA.
Signed-off-by: Franciszek Pindel <fpindel@antmicro.com>
To reduce the latency of CPU accessing/modifying SW TCD content, it
better to put TCD pool to DTCM by default.
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
New implemented eDMA loop SG mode can be used to lpuart driver to fix
the conflict of "Done" bit issue which cause uart_async_api test failed
when SG mode is enabled.
Also, this loop SG mode works well even with a high bandrate(test done
on 2000000bps).
Fixes: #78291
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
I2S speed test failed because of "Invalid destination address" issue By use
eDMA loop SG mode, this issue is fixed.
Fixes: #70777
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
Existing dynamic SG mode have some issues which cause uart sync api and
I2S speed test failed.
These issues are: a wrong "Done" bit issue found on UART async api
test. An invalid destination address issue found on I2S speed
test. By introducing loop SG mode, these issues are all fixed.
Some data structures are different between eDMA and eDMA V4, use
different macros defined in SDK driver for each of them.
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
In the description of the partial-final frame of the SMP UART transport
specification was a typo in the maximum allowed raw body size. The size
must not be larger than MTU - 5 because there are 5 bytes occupied by
total length (2), frame termination (1) and crc (2).
Signed-off-by: Simon Moser <simon.github@mailbox.org>
Responses are currently set to the shell device that was configured
in the device tree.
The shell_uart driver allows for changing it's device during runtime
which leads to a situation where we recieve packets on one device
and respond on another.
This patch causes smp_shell_tx_raw to use the shell_uart device
Signed-off-by: Zak Portnoy <zakportnoy@gmail.com>
The linker script snippet that places the llext_no_syscall_impl section
has the unfortunate side effect of overwriting the current linker
address. This can lead to unexpected behavior of the caller script.
Saving the current address before defining the section and restoring it
afterwards avoids this issue.
Fixes#81136.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This commit deals with fixing various issues that prevents
the device from being built. In specific:
1. Fix default timing macro definitions to build with
an MSPI controller, other than AMBIG.
Add macro definition for MSPI_PORT.
2. Timing settings should be applied only when MSPI_TIMING
is defined. Otherwise, the APS6404 initialization routine
will fail with -EIO.
3. Similarly, use MSPI_XIP and MSPI_SCRAMBLE to apply XIP
and SCRAMBLE device settings, respectively (optimization).
4. MEMC_INIT_PRIORITY is assigned higher priority than
MSPI_INIT_PRIORITY which results in compiler error as
APS6404 device initialization depends on its underlying
MSPI bus controller.
5. The 'acquire' subroutine should be compiled when PM_DEVICE
is used (suppress compiler warning).
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Adds glob expression triggering CI for *all* changes in boards'
documentation, not just those matching the "*.rst" pattern since there
can also be images being changed without any other change on RST files.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Check the return code of the i2c_target_read/write callback function
is 0 before continuing the transmit/receive operation on I2C target
When Transmitting: 0 if data has been provided, then continue
When address matches: 0 if the write is accepted or
if more data can be requested depending on the transfer direction.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
If we could not fragment the IPv6 packet, then drop it and do
not try to send it. Let the upper layer re-send the packet if
needed. It is causing more trouble if we try to send the packet
and not honor the MTU setting.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we could not fragment the IPv4 packet, then drop it and do
not try to send it. Let the upper layer re-send the packet if
needed. It is causing more trouble if we try to send the packet
and not honor the MTU setting.
Fixes#81021
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
nRF70 recovery relies on power-management feature which isn't applicable
for SAP, so, we keep seeing false recovery causing interface restart.
Disabled recovery for SAP to fix the issue.
Fixes#81130.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
SNTP simple runs request iterations with exponential backoff.
If the net interface is a slower connection (ie. CAT M1 modems)
then the request will be sent but the response may take time to
be received, thus causing a timeout and another request to be sent.
Because of the nature of UDP and the fact that the same socket
(source IP/port combo) is being used for both requests, a delayed
response to the first request can be received as the response to the
second request, causing -EINVAL to be returned when the timestamps
mismatch (see subsys/net/lib/sntp/sntp.c). The solution provided
retries receiving the response when the timestamp is mismatched
(without sending an additional request).
Signed-off-by: Marcus Penate <marcus.penate@ellenbytech.com>
Refactored the structure of the troubleshooting section so it
is more similar to how e.g. the ArchWiki lists troubleshooting
entries, which makes it easier to search for and separate
each entry.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The exisitng documentation was out of date and
possibly not working.
Added a section on how to use NAT and port forwarding.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The documentation guidelines have a specified order of
header underlines that this file did not follow.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes overlay configuration to allow running the test on CI without
externally connecting two pins.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Fix missing input/output enable flags on pinctrl macro, which
wouldn't allow for driver to see and apply flags configuration
made in the device tree.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Updates and fixes to support IPM sample on ESP32:
- fix IPM sample code for APPCPU and PROCPU
- align with memory layout, add flash awarenes
- shell commands to stop/start APPCPU
- reorganize overlays
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Updates and fixes to support APPCPU.
- fix ld scripts
- fix and update memory layout
- fix build issues
- fix sysbuild
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Fix missing flash and code partition.
Add missing dts entries and use common partition tables to all related
non-Espressif boards, previously ommited.
Add uart1 node in pinctrl for APPCPU.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Align the shared memories with the memory.h layout.
Reorder nodes to show memory related nodes together.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Twister's extra arguments feature only works correctly if the fully
qualified platform name is given, which was not the case. Make all
platform names for the shield testcase fully qualified to resolve this.
Fixes#80876
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
LPC54114 does not define arduino_header nodelabel, so it cannot be
supported by the shield test within the display sample. Replace with
mimxrt1010_evk, which is supported.
Fixes#80876
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The doc on `_bt_gatt_ccc.value` specifies that only connected peers
contribute to that value. But before this change, it was computed from
all entries in `_bt_gatt_ccc.cfg`, which include bonded but not
connected peers when `CONFIG_BT_SETTINGS_CCC_LAZY_LOADING` is set.
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Fix 'drivers.ipc.mailbox' test suite to restore and improve
its testing functionality:
* fix printf() redirection through IPM console.
* fix and check the dummy driver initialization.
* specify correct Twister harness type (Console)
and use matching patterns to recognize the expected
console output.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
The FRDM_MCXW71 Platform has a reserved IRQ as its
last IRQ, this test was using this IRQ to
test an interrupt and would not fire. This change
ensures the test does not use the reserved IRQ.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
The flash_flexspi_nor_check_jedec() checks the lower 16-bits of
the manufacturer ID and installs a custom LUT table.
Add an exception to check for the whole 32-bits so we do not
accidentally install custom LUT for flash devices that do not
support this LUT table.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
CACHE64_GetInstanceByAddr() function was asserting when an instance was
requested for an invalid address that the CACHE64 controller does not
manage. This behavior is not correct, as the CACHE64 management
functions check to see if the instance number returned by this function
is out of range (and if so, simply return without modifying the cache).
This assertion was causing a failure within the USDHC driver, which
performs a cache clean/invalidate for tx/rx transfers within the HAL
layer. When a transfer was run using a data buffer not in the CACHE64
address range, this assertion failed and caused the application to crash
Fixes#80901
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Workaround failing autopts weekly run due to tester
application having Bus Fault in the nRF53 NET core hci_ipc
firmware at startup.
Having atleast 32 bytes free in nRF53x hci_ipc sample to
avoid Bus Fault when Zephyr Kernel does SYSINIT calls.
Reduce supported ISO Broadcaster instance and ISO TX buffer
counts in the Controller hci_ipc firmware.
Add sysbuild support for tester application so that the
build is CI verified.
sysbuild commandline for LE audio PTS testing:
# west build --sysbuild -b nrf5340_audio_dk/nrf5340/cpuapp
-d build/tester tests/bluetooth/tester
-DEXTRA_CONF_FILE="overlay-le-audio.conf"
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updating the minimum Ram Size for failing tests
that require more ram memory for heap allocations.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
By default, libc malloc allocated area is using all available RAM.
For some yet unknown reason, this conflicts with TF-M resulting in a
Hard Fault before jumping in the non secure application.
For now, define a Libc malloc area defined to 2048 which is the default in
some other typical applications (ARMv7 targets enabling USERSPACE).
Fixes#77847
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
If the lock request was rejected by a set member we should
restore any previously written logs in reverse order.
However there was a off-by-one error in
csip_set_coordinator_write_lock_cb which caused us to attempt to
release member[1] instead of member[0] if member[1] was the
one that rejected the lock request.
Additionally, the lock_set_complete would be called
prematurely before we get the response from the restore
request.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add condition check so that the 11k flag will be updated for set
operation only.
Fix print log error when getting 11k status.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Adds the object core configuration to the latency_measure benchmark's
testcase.yaml file as there have been requests for it.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The mp pointer is in fs_file_t and fs_dir_t so if the fs pointer is made
NULL then subsequent file I/O operations will cause a NULL pointer
exception. Removing the mount point from the list is threadsafe and
should be sufficient.
Signed-off-by: Chris Desjardins <chris@arch-embedded.com>
Increase target DSI clock frequency for the RT1160, as the DSI
peripheral requires a faster clock to account for the DSI packets that
must be sent outside of video mode frames.
This fix was previously applied for the RT1170, but is also needed for
the RT1160 SOC as they use the same DSI IP.
Fixes#78299
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
With the newly introduced settling time for PLLS, we are seeing a peak
performance drop of 3Mbps in Zperf benchmarks, and also other
performance tests are also impacted.
This settling time was introduced based on observations in lab and not
because of any real problem or bug reported, so, for now, use zero
settling time (same as earlier) till we fully investigate and understand
the impacts and need.
Fixes#80951.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The state check used != instead of == to very that it entered
the streaming state for all streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use net_if_carrier_off during iface init instead of net_eth_carrier_off,
to immediately mark net if as down
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
There is no way to know for sure the size of an image built for a test,
given that zephyr can build for so many different architectures,
platforms, software supports, etc. So it should be clear that the filter
for min_ram and min_flash on the twister testcases is an estimate, and
not a strictly well known value.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
When option ARM_MPU is disabled exclude soc\nxp\imxrt\mpu_regions.c.
It is needed to remove constraints of SRAM and FLASH size.
Fixes#70920
Signed-off-by: Grixa Yrev <GrixaYrev@yandex.ru>
Remove mutex locking in favour of the standard IRQ locking mechanism.
The primary problem with the mutex implementation is that mutex locking
is forbidden in ISR's. This means that any logging from an interrupt
context (e.g. LOG_PANIC in an exception handler), will itself trigger
another assertion due its attempt to use a mutex.
Furthermore, mutexes are a relatively heavyweight locking scheme, which
doesn't necessarily make sense in the context of extremely short locking
periods that would be expected from RTT.
This change aligns Zephyr with the default RTT locking scheme, which
uses interrupt masking to perform access control.
Resolves#79403.
Signed-off-by: Jordan Yates <jordan@embeint.com>
In ARM architectures the entry_cpu_exception_extend calls
svc #0 when trying to generate a `K_ERR_CPU_EXCEPTION`, however
z_arm_svc calls z_do_oops with a stack frame only, and gets the
reason from `r0`. This means that the test working was just lucky
and running it with another compiler (or setting the value of r0
before the svc #0 call, made the test fail).
Cortex-A/R 32-bit architectures was doing a BKPT, this works better
but will not be a hard exception when debugger is attached.
I switched all the Cortex 32-bits to the ARM specified undefined
instruction.
Also RISC-V has a designated unimp instruction that should be used to
guarantee trap.
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
The ptables field in arch_mem_domain for Xtensa has excessive
padding as it is incorrectly marked with needing page size
alignment. This is simply a pointer and not the actual page
table so there is no need for that alignment. So remove it.
Fixes#71896
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For some weird reasons, enabling ICOUNT would result in some
tests crashing QEMU. So disable ICOUNT.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
custom simulator needs an executable defined, or else we will have tests
marked runnable with nothing to run them which would result in an
error/warning.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The CONFIG_PINCTRL is removed from the board's defconfig files.
Drivers which use pin control function should add "select PINCTRL"
in their Kconfig files.
Fixes#78619
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Busy-waiting for the result of the nrfs service calls can stall, so
let's use a callback that flags a semaphore instead. Since the API is
supposed to be callable in the context of pre-kernel, fallback to
busy-wait on that scenario.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Only the first chunk of the desired image is displayed repeatedly over
the screen height (at least on an NHD-2.7-12864WDW3 display). Fix it
by computing the internal mono01 to 4bit grayscale conversion buffer
size correctly so it can fit the entire image.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
In case more than one segment per pixel is required, only part of the
segments were written resulting in low and uneven pixel brightness (at
least on NHD-2.7-12864WDW3). Fix it by writing all required segments.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
A call to the write API function was never returning as we were trapped
into an infinite loop. This was caused by the pixel_count pointer not
being incremented properly.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
The test had a few off-by-ones in the code, which caused access
to invalid data.
Fixed by setting the right buffer sizes and the right AD length
fields.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add checks in the GPIO bitbang mode to avoid a fault for missing
configuration in the devicetree.
Fixes#80850
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
The current alignment logic does not work as expected if given unaligned
values, resulting in a skip of the first word. The length also has to
take into account the starting address: for example, asking for 2 bytes
at offset 3 should actually check 8 bytes.
This patch adjusts the logic so that it always includes the first and
the last word of the input area.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
As other targets in the LPC55xxx series, the LPC55S36 has a Flash
controller that raises ECC errors when reading erased pages directly.
To avoid this, there is special code for this platform that calls the
HAL FLASH_IsFlashAreaReadable() function. However, this in turn calls a
function at an hardcoded address in ROM that _always_ causes an
instruction fault, making the situation worse.
This patch reworks the read operation to use the FLASH_Read() HAL
function for this target to gracefully handle error conditions and
properly emulate accesses to erased pages. The preprocessor is required
since some targets do not define the FLASH_Read() function.
Fixes: #80325
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Small mismatch between the actual procedure name and the name as
described in the doxygen documentation for the bap set broadcast
code procedure
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Add an extra "git show" step to the release process to verify that the
key has been indeed signed.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add entries for video driver contributed or enhanced.
Add entries for video APIs introduced or modified.
Signed-off-by: Josuah Demangeon <me@josuah.net>
mdio_enet_nxp driver accesses the registers of its parent node Ethernet MAC
This commit enables this node in mimxrt1062_fmurt6 board's device tree.
This also fixes Issue #80881
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
On nRF54H and nRF92, booting certain cores requires programming a UICR,
which is normally generated using nrf-regtool. This should be considered
an optional dependency, because we do not wish to force non-Nordic users
to install it just to work with Zephyr, or just for build-only tests.
When nrf-regtool is not installed, a CMake warning will be displayed,
but people ignore warnings all the time. As the last line of defense,
check for missing UICR in the nrfutil flash runner, to prevent our users
from unintentionally programming unbootable firmware. Show a fatal error
specifically if CONFIG_NRF_REGTOOL_GENERATE_UICR=y, yet no UICR exists.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
This completes the existing "Documentation" section of the release notes
for 4.0 by documenting the various changes/improvements implemented
during the last development cycle.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
GAP PAST (and BAP) tests were also enabled since controller support is
under review.
This also adds bqw file which is exported draft project from
Qualification Workspace.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
[1] was introduced to get more valuable answers from
the PropertySpec.path API, which is supposed to tell
in which file the property's specification was "last modfied".
Further work on related issues [2] showed that the
approach chosen in [1] is dead end: we need to first rethink
how bindings (and especially child-bindings) are initialized.
[1] edtlib: fix last modified semantic in included property specs
[2] edtlib: Preserve paths of properties from included child bindings
See also: #65221, #78095
This reverts commit b3b5ad8156.
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
Use-case "B includes I includes X":
- X is a base binding file, specifying common properties
- I is an intermediary binding file, which includes X
without modification nor filter
- B includes I, filtering the properties it chooses
to inherit with an allowlist or a blocklist
Check that the properties inherited from X via I
are actually filtered as B intends to,
up to the grandchild-binding level.
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
This unit test was added to cover the change introduced by [1].
Further work on related issues [2] showed that the chosen approach
is dead end.
We're reverting all changes made in [1].
[1] edtlib: fix last modified semantic in included property specs
[2] edtlib: Preserve paths of properties from included child bindings
See also: #65221, #78095
This reverts commit 70eaa61cb0.
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
This unit test was added specifically to cover a regression
reported by the CI while working on [1].
Further work on related issues [2] showed that:
- [1] and [2] are dead end: we need to first rethink
how bindings (and especially child-bindings) are initialized
- the inclusion mechanism supported by Zephyr deserves more systematic
testing in edtlib if we want to work with confidence
The approach we choose is to:
- revert all changes made in [1]
- from there, systematically add unit tests as we address
the issues we identified (or the additional features we need)
one after the other
[1] edtlib: fix last modified semantic in included property specs
[2] edtlib: Preserve paths of properties from included child bindings
See also: #65221, #78095
This reverts commit 33bb3b60d9.
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
- Fix typos for alarm field identification
- Fix a bug where an alarm interrupt starts
update interrupts
- Rework interrupt code to reduce code size
and complexity
Signed-off-by: Daniel Kampert <danielkampert@kampis-elektroecke.de>
If a device disconnects while we are in a procedure then
get_next_active_instance would return a service instance pointer
with the `conn` set to NULL.
The issue was caused by the set_info being potentially memset
when the device that disconnected was the one that held the
set_info pointer.
The solution is to not use a pointer, but rather a copy of the
set_info, so that the active.set_info value is still valid
after a disconnect.
Since the set_info is not longer a pointer to a specific
set_info from one of the members, the logs have been updated
as well, as the pointer of the active.set_info is useless
for debugging.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This bus type was originally created for what's today the ipc.c HCI driver.
Since this type hasn't yet been synced with BlueZ, rename it for
consistency, however leave the old define to not break backwards
compatibility with existing DT bindings (there are several more that use
"ipm" than ipc.c).
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The authoritative source of these values is BlueZ:
https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/lib/hci.h#n38
Update our values with the above. The IPM definiton doesn't exist in
BlueZ, but should be added there to make sure we don't get out of sync
again.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Update of release notes in areas related to Storage and Flash.
Additionally two known Stream Flash issues have been added to
Know Issue section.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This introduces the release notes and migration guide for 4.1.0 earlier
than we typically do, so that people have a placeholder to start adding
content as they line up pull requests for 4.1.
The two documents are currently orphan and not visible from the main
documentation as this would confuse users of 4.0.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
ramfunc region is copied into RAM from FLASH region during XIP init. We
copy from the loadaddr of the region, and were previously loading to the
symbol __ramfunc_start. This is incorrect when using an MPU with
alignment requirements, as the __ramfunc_start symbol may have padding
placed before it in the region. The __ramfunc_start symbol still needs
to be aligned in order to be used by the MPU though, so define a new
symbol __ramfunc_region_start, and use that symbol when copying the
__ramfunc region from FLASH to RAM.
Fixes#75296
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The FPU is already disabled by the z_arm_svc function when the first
thread starts. Therefore, disabling the FPU at boot is unnecessary for
lazy FPU; instead, it must be enabled to handle floating-point instructions
before the lazy FPU works.
Signed-off-by: Ha Duong Quang <ha.duongquang@nxp.com>
Gdb is typically able to reconstruct the first two frames of the
failing stack using the "pc" and "lr" registers. After that, (if
the frame pointer is omitted) it appears to need the stack pointer
(sp register) to point to the top of the stack before a fatal
error occurred.
The ARM Cortex-M processors push registers r0-r3, r12, LR,
{possibly FPU registers}, PC, SPSR onto the stack before entering the
exception handler. We adjust the stack pointer back to the point
before these registers were pushed for preservation in the dump.
During k_oops/k_panic, the sp wasn't stored in the core dump at all.
Apply similar logic to store it when failures occur in that path.
Signed-off-by: Mark Holden <mholden@meta.com>
A recent commit changed all references to the global 'west.log' instance
(now deprecated) to the new WestCommand logging API, but another PR
merged in the same period added an extra instance that is now causing CI
to fail. Convert this last reference to the new API.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The 'west build' command does not know about conditional flags (in the
format 'type:value:CONFIG_FOO=bar') in the 'extra_configs' argument of
Twister testcase.yaml files, and currently converts them to malformed
arguments that are silently ignored by cmake.
This change adds a check to 'west build' to clearly warn the user if the
'extra_configs' list contains conditional flags and provide a hint on
how to add them to the CMake command line.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This reverts commit 206897658a.
We must keep the frame completion interrupt disabled until we send a new
frame to the eLCDIF, as the frame completion interrupt fires at each
vertical blank interval. If we keep it enabled, then the semaphore we
use to indicate the frame has been loaded by the eLCDIF will be posted
to when we do not have a frame queued, and calls to `display_write` will
return before the eLCDIF has actually loaded the new framebuffer.
Fixes#80590
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Led blinking period was made configurable and time unit changed
from sec to msec recently in the source code of the sample.
Console harness regex was not changed accordingly in sample.yaml.
Device testing fails when run with twister.
Change the regex to accept any period and change the units to msec.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
The test was not being run on arm64 and riscv because the filter was
incorrect. Properly fix the filter to run the test on all platforms
that have any kind of MMU enabled.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Most of the tests in the LLEXT subsystem test suite run with memory
protection hardware (MPU/MMU) disabled, to avoid including memory domain
issues while testing the core functionality. Only a few tests need to
run with MPU/MMU enabled.
This patch simplifies the testcase.yaml by setting the memory protection
as disabled in a shared config file that is included by most tests.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Restore Apollo boards now that the issue has been fixed.
Also remove extra CONFIG_SOC_SERIES_S32ZE filters, as they are already
covered by the 'platform_exclude' common section.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The fs_loader test is always executed in the main test source when
CONFIG_FILE_SYSTEM is set, and this is in turn enabled by per-board
config overlays. So there is no point in having a separate test case:
it is simply a duplicate of the "readonly" test.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This works because undefined macro in conditional is treated as zero,
but could end up choosing the wrong divider.
Fix the macro with the new name.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Fix a problem with the test that manifested itself with a surprising
assertion failure at lib/utils/onoff.c:283. Apparently, due to the
stack being too small, some memory got accidentally overwritten.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
With introduction of Raw modes, nRF70 driver now advertises get_c
onfig OP, but doesn't implement all types.
This causes problems two-fold with checksum calculations:
1. The "config" isn't uninitialized, so, every call returns differnet
values. So, for UDP header checksum would be done and
pkt->chksumdone would be set. But for IPv4 header checksum might be
skipped.
2. Even if we initialize to zero, then network stack gets all zeros
and calculates checksum by itself rendering offload moot.
There is another problem in #1, as there is only single flag for pkt for
all checksum, nRF70 driver sees this and tells UMAC to skip checksum for
the entire packet. The design isn't coherent, and should be converted to
communicate per-type checksum status (some are filled by network stack
and some HW).
But as nRF70 support all checksum offloads, advertise all types for both
RX and TX.
Upstream PR #: 80882
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In case the driver UP fails, the FMAC context will be NULL, so, add a
NULL check in the DOWN.
Fixes a crash seen when working with unprogrammed OTP (no MAC) that
fails the interface UP.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
If a string is already present in the provided buffer,
prometheus_format_exposition() appends it instead of overwriting,
hence the buffer needs to be cleared on the test start, otherwise it
works by chance.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes the zbus publishing statistics test to account for a non-zero boot
delay, which is often used in hardware testing environments. This fixes
an assertion failure observed on multiple max32 boards in the adi board
farm.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Status and request GPIOs are missing from the edge connector, add those
to fix Thingy53 + nRF7002EB build.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
const is ignored on the function return type. A warning is reported with
-Wignored-qualifers. Remove the ignored const.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Fix Twister TestCase statuses left not assigned ('NONE') in these 'NOTRUN'
situations:
* a test suite has `integration platform` which is not available to run.
* `--cmake-only` execution.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
These tests have been seen failing in CI due to the
real time execution timeout. Let's increase it so it does
not happen.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
`-specs=` is an alternate form of `--specs=`, which is now used by the
Zephyr build system.
This commit adds `-specs=*` to the ccache ignore option list because, as
with `--specs=*`, ccache is unable to resolve the toolchain specs file path
and refuses to cache when this option is specified.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
SD and MMC devices now require the disk-name property. Add a note to the
migration guide so that users know the recommended value to add for this
name for each disk driver type.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_MMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the mmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
mmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
k_sleep may not be enough to let advertiser send the message. Instead we
should rely on the bt_mesh_send_cb.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Instead of checking the `enabled` flag, check if BT_MESH_SUSPENDED is
set in the legacy advertiser thread. BT_MESH_SUSPENDED is set earlier
than advertiser is stopped and will prevent the advertiser send anything
earlier.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Fix spurious ISO Sync Receiver stall due to uninitialised
value accessed due to regression introduced by
commit 64faceea72 ("Bluetooth: controller: Stop Sync ISO
ticker when establishment fails").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
As part of TinyCrypt deprecation process (#79566) this commit
removes usage of this library from the JWT subsystem and its
related tests.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Following the deprecation of TinyCrypt (#79566) we remove
TinyCrypt usage in random generators. This basically only affects
the CTR-DRBG random generator which from now only will only make
use of Mbed TLS.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
As for the IMX SOCs all the lines removed in this commit were
actually commented out so there's basically no change in code
behavior expected here.
The only affected SOCs family is therefore the Kinetis one.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
As part of the deprecation process of TinyCrypt started in #79566,
this commit set the TinyCrypt based crypto shim driver as
deprecated.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Make sure this expansion doesn't include `CONFIG_DCACHE_LINE_SIZE`,
which would be undefined and produce a build error.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Test was marked build only with filters in each scenario looking for
sdl-dc which is only available on native_sim, so cut the chase and use
platform_only to narrow things down to native_sim directly instead of
building the world to get information we already know.
reduces build/run time from 78s to 17s on invocation of twister with
default options, saves a ton more when running twister with --all.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
RT11xx SOC init should check to see if the zephyr flash node is
set to a device on the FLEXSPI bus to determine if the part is running
in XIP mode. This check was incorrect, so the FLEXSPI was being
reclocked in XIP mode to 24 MHz. Fix this check so the FlexSPI is not
downclocked.
Fixes#75702
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
According to the datasheet, the PHY address is 0x1. When changed to this
value the PHY id is correctly read.
Before:
```
[00:00:00.602,000] <err> phy_mii: No PHY found at address 0
```
After:
```
[00:00:00.051,000] <inf> phy_mii: PHY (1) ID 7C111
```
Signed-off-by: Tomáš Juřena <jurenatomas@gmail.com>
The pm_policy_event_register() API takes absolute cycles as the
second arg, like pm_policy_event_update(), but the arg is renamed
time_us and treated as a relative time in us rather than abs
cycles.
Fix implementation of pm_policy_event_register() to treat cycles
like pm_policy_event_update() and API docs suggest.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The new update of clock device tree make the pll p q r clock
source cannot be choose by other node
This fix add 1 new dts binding for pll out p q r out line
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
In some circumstances the struct eth_stm32_tx_context object that was
allocated on eth_tx's stack is still referenced after the function exits.
This usually happens when the network is disconnected, depending on the
PHY hardware.
When the network is reconnected there will eventually be a call to
HAL_ETH_ReleaseTxPacket, which calls HAL_ETH_TxFreeCallback with the
(now invalid) pointer to the tx context. When HAL_ETH_TxFreeCallback
tries to dereference that pointer we get a bus error.
Fix this by allocating struct eth_stm32_tx_context objects from a
static array, similarly to how the buffers are allocated. This ensures
that they remain valid until the HAL is finished with them.
Fixes: #79037
Signed-off-by: Kevin ORourke <kevin.orourke@ferroamp.se>
Fixes: #80193
With #62395 the Zephyr kernel and app version customization values were
moved to target properties to allow Zephyr modules to adjust the values.
This had the consequence described by #80193 that version customization
using CMake arguments, `-D`, or CMakeList.txt toplevel file can no
longer be used for customizing the version.
To support both CMake variable as well as Zephyr module version
customization use-cases then this commit uses `zephyr_get()` to fetch
any CMake variable adjustments and uses the value for default property
setting. This allows users to set customized version while still allow
Zephyr modules to overrule this as intended with #62395.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With the recent update to Sphinx RTD theme 3.0.0, a 19px-high element
that used to display the version number is not visible anymore, so the
JS code that hides the upper-left logo when scrolling down needs to be
adjusted to account for this change.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
If the direction of the last setup packet is not to the device but to
the host, then the transfer is not a status stage and should be queued.
This is not checked and prevents a zero length control IN transfer to
the host, e.g. used by the DFU class to indicate the end of the upload
process.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Reset control endpoint busy flags if configured and enabled, otherwise
it could mark the wrong buffer as busy after endpoint disable/enable.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Using strncpy gives this warning
warning: 'strncpy' output may be truncated copying 32 bytes from
a string of length 32 [-Wstringop-truncation]
strncpy(roaming_params.neighbor_rep.neighbor_ap[idx].bssid_info,
bssid_info,
sizeof(roaming_params.neighbor_rep.neighbor_ap->bssid_info));
There is '\0' at the end of the allocated buffer so we can safely
use memcpy() here to avoid any warnings.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure we are not able to overwrite string variables in sscanf
call. Allocate also one extra byte for null terminator character.
Fixes#80644
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Usage of K_SPINLOCK with CONFIG_DEBUG=y seems to trigger a compiler
warning about request not always being initialized. Fallback to
k_spin_lock/unlock calls to fix this issue.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Twister shall now verify that the user does not
use an obsolete Python version. If user's Python
is deemed too old, it will raise a relevant error.
This check will also happen when running Twister
via west.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This Kconfig has wrongly been added to defconfig files. It is not the
right place for it. It has never been the right place for it. Drivers
that need it should select the symbol in their Kconfig entries. Drop
PINCTL from Kconfig.defconfig and add proper select at Kconfig.sam*.
Fixes#78619
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
I recently found out, that the Ethernet support for the boards Nucleo
H563ZI and STM32H573I-DK is already available but it isn't mentioned
in the "Supported Features" section.
Signed-off-by: Philipp Steiner <philipp.steiner1987@gmail.com>
Not all the stm32H7 have a clock enable for their flash;
only the dual-core.
For the st,stm32h7-flash-controller with "clocks" property, the driver
will enable the flash clock bit in the corresponding RCC register.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Define the "clocks" property, for the flash "st,stm32h7-flash-controller"
node, only for the stm32H7 dual-core devices
which have the RCC bit 8 present in their RCC AHB3 register.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Because we might get answers in capital letters, convert the answer
to small case letters and also make sure we send query in small case
latters. This makes sure that our query_hash is properly calculated
regardless of how the resolver gets the data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allocate one extra pointer for the DNS server list so that
DNS resolving code can detect the end of the list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This Kconfig has wrongly been added to defconfig files. It is not the
right place for it. It has never been the right place for it. Drivers
that need it should select the symbol in their Kconfig entries. Drop
PINCTL from Kconfig.defconfig and add proper select at Kconfig.gd32.
Fixes#78619
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This change was in the same commit previously reverted and seem to be
unrelated and should not be reverted.
Fixes the problem:
..... /swap_helper.S:432:(.text.z_arm_svc+0x26):
relocation truncated to fit: R_ARM_THM_JUMP11 against symbol
`z_arm_int_exit' defined in .text._HandlerModeExit section in
....core/cortex_m/libarch__arm__core__cortex_m.a(exc_exit.c.obj)
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The struct jesd216_bfp was declared as __packed but later in the code
the address of a member was given to a non-packed pointer, potentially
causing reading of wrong addresses, and causing warnings with the
IAR ICCARM compiler.
After studying the JEDEC documentation JESD216F.02, section
6.4.2 JEDEC Basic Flash Parameter Header: 2nd DWORD, the struct must
be aligned to 4 so __packed is not necessary, just 4 byte alignment.
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
I for the life of me do not know what is going on here with the RNB chip
but it seems this override must be set in order for the chip to work,
regardless of strap-in configuration, and if not set explicitly, the
value after a reset for these two bits will be seemingly random and
inconsistent. And it was working before by luck before removing a second
redundant reset in a recent commit, because apparently the register
was getting the opposite of the reset value according to the datasheet
which makes it work. The result of these bits after reset seem to vary
depending on host mcu, board, debugger, number of times reset, type of
reset, and with a pinch of random chance after keeping all variables
seemingly the same, so let's just set it to the value that works
explicitly, even if it doesn't make sense. The bit here doesn't have
clear documentation but it seems it's for using RMII regardless of the
strap in option, which is what we want to do anyways if we know the
interface type from DT, so I think it's fine, considering it is making
this driver work again.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
500 ms reset time is only for software reset and comes from IEEE spec.
Datasheet mentions for hardware reset the assertion of the signal should
only need to be 500 us, and 100 us after deassert to wait to access
programming interface.
Also remove an unused macro.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
It is enabled by default if we enable device PM, but we do not want
this, otherwise we get linker errors (PM subsys, fun guaranteed!).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
When GPD is managed by pinctrl, pins retention needs to be controlled by
the driver to avoid glitches.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This patch allows to _safely_ configure GPIO ports that have their pad
on FAST_ACTIVE1 domain.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This patch introduces a new flag to indicate if a peripheral belongs
to FAST_ACTIVE1 domain. This way, pinctrl knows when to request the
SLOW_ACTIVE domain (where CTRLSEL multiplexer resides).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add the global power domain entry. This domain is not memory-mapped
but controlled using NRFS services.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The AT / STA wifi sample is generic so it does not need to be
located under espressif board directory. Following commit
will do additional changes to make the sample more generic.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move samples/net/wifi application to samples/net/wifi/shell
as it has been used as a shell application before.
Following commits will add new wifi samples to this directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
- fixes overlay-udp.conf build for platforms without TRNG.
- adds TEST_RANDOM_GENERATOR, as for most network samples.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Most boards set zephyr,bt-mon-uart to point at the same device as
zephyr,console. It's still useful to have the possibility of having these
as two different devices, however it's useful to fall back to the UART
console in case a dedicated monitor UART hasn't been specified.
This also ensures that the fallback only happens if the console UART isn't
enabled, but a DT chosen property exists for it. Additionally, we now get a
user friendly error in case the Bluetooth UART monitor feature has been
enabled in Kconfig but there isn't a suitable UART available for it in
devicetree.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Update Zephyr fork of MCUboot to revision:
f74b77cf7808919837c0ed14c2ead3918c546349
Brings following Zephyr relevant fixes:
- f74b77cf imgtool: fix signing for fix-sig-pubkey public rsa
- 439930ae boot_serial: Fix serial recovery for LPC55x and MCXNx
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Let's explicitly mention we are enabling the native_posix entropy
driver for this board (the real nrf54l15dk does not have an entropy
driver in Zephyr yet).
And correct a bit the wording around mbedtls as for the real target we
don't have mbedtls with HW acceleration.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When conversion is done in two steps (output length calculation
followed by the actual conversion), it was failing when helper
array for holding calculated string length from the first
conversion run was shorter than number of strings that were
supposed to be appended to the package. Fix by taking into
account strl_len to determine if length can be taken from the
array or need to be calculated again.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add test for cbprintf_package_convert function which checks if
it correctly handles array that holds string lengths. When convert
function is used twice, at first to calculate size of the output
package and then to actually convert the package, array of string
lengths can be used to optimize operation by not calculating
string lengths twice. However, array may not be able to hold all
string lengths that are needed for that package. In that case,
string lengths that did not fit into the array will be calculated
twice, in both conversions.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Hide the main table of contents so that it doesn't show up in the actual
documentation index, only in the side bar. This helps keep the index
less cluttered and to the point.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Help make sure the most important documentation entry points are visible
without scrolling by moving less important information "under the fold".
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The current implementation casts the user data to the attribute value,
which makes an assumption about the user data. This commit changes the
implementation to use the attribute value read function when extracting
the characteristic properties.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Remove deprecated _ENUM_TOKEN and _ENUM_UPPER_TOKEN. These are
deprecated for over three years by now.
Signed-off-by: Joel Hirsbrunner <jhirsbrunner@baumer.com>
This commit fixes configuring pin drive strength in pinctrl driver.
Previously, there was a mismatch while filling pincfg and checking
pincfg drive strength field. This fix simplifies the operation and
avoids gpio driver header dependency.
Signed-off-by: Mert Ekren <mert.ekren@analog.com>
Co-Authored-By: Sadik Ozer <sadik.ozer@analog.com>
When using the --build-only into --test-only
Twister setup, NOTRUN statuses were not properly rerun.
Now they are properly run again if runnable.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
In receiving thread, continuing the loops is based on
has_ongoing_exchanges() so it does not need atomic
coap_client_recv_active variable.
When idling, it wakes from semaphore. But there was potential
deadlock when coap_client_schedule_poll() would not signal the
semaphore, if atomic variable was already showing that it runs.
Removing the atomic variable removes this deadlock.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If we receive poll() error during a request, it must
be forwarded to application.
If instead receive poll() error later, it should not be
forwarded as it might be result of application closing the
socket.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
It is error prone to flag separate booleans, so try to use
reset_internal_request() every time we release the internal request
structure.
Also refactor the reset_internal_request() so that we reset the
timeout value so it does not trigger again.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If send() fails, we have not technically send the CoAP retry yet, so
restore the same pending structure, so our timeouts and retry counters
stay the same.
This will trigger a retry next time the poll() return POLLOUT, so we
know that we can send.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Refactor the CoAP retry handling into the handle_poll() function,
so that we only try to send retries if the socket reports POLLOUT.
Also move the receiving into same loop, so when poll() reports POLLIN
we recv() the message and handle it before proceeding to other sockets.
Also fix tests to handle POLLOUT flag and add support for testing
multiple clients.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When transmission of first request fails, reset the internal request
buffer as there is no ongoing CoAP transaction.
Application can deal with the failure.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This causes a build error as nRF70 driver running on CPU APP needs this
when SR co-existence is enabled.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This commit adjusts the sizes of the two PLIC nodes AE350 defines:
* `plic0` size is changed from `0x04000000` to `0x02000000`
* `plic_sw` size is changed from `0x04000000` to `0x00400000`
Without these change, `plic0` address space would overlap with `plic_sw`,
and with other memory-mapped peripherals.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add "memory" to the clobber list"
From GCC 14 the compiler optimizes away memory accesses that do not
impact the asm block. Adding the memory to the clobber list lets the
compiler know that the memory state is to be preserved.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Move the _main argument to the input list rather than the output one on
the asm block and change the spec to "r". The ASM block does not return,
so it does not make sense for it to expect any output.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
To use Xtensa toolchain, various environment variables must be
set so the executables can find necessary files and what core
to compile for. This becomes an annoyance when you have to
test multiple boards with different cores. You have to use
one set of environment variables per core. Twister cannot test
them all in one setting, and it is especially annoying doing
west builds. So enhance the environment variables handling so
that TOOLCHAIN_VER and XTENSA_CORE can be replaced by
TOOLCHAIN_VAR_<board> and XTENSA_CORE_<board> where <board>
is the normalized board target (think <board>.yaml). CMake
will then figure out the core ID for the toolchain to use.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
xt-clang uses GNU Assembler (xt-as) based on binutils. However,
CMake doesn't recognize it when invoking through xt-clang. This
results in CMake going through all possible combinations of
command line arguments while invoking xt-clang to determine
assembler vendor. This multiple invocation of xt-clang
unnecessarily lengthens the CMake phase of build, especially
when xt-clang needs to obtain license information from remote
licensing servers. So here forces the assembler ID to be GNU to
speed things up a bit.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
ExecutionCounter has been expanded and now hold i.a.
more information on the statuses of TestCases.
This information is now incorporated in relevant summaries
- runner.py and reports.py.
Layout of those was changed to present that
and previous information in a clear and concise way.
TestInstance execution counter now is more intuitive.
Instances filtered out before running are no longer included there.
Retries now properly reset the counter.
TestCases with None and other incorrect final statuses
are logged as errors, but do not
exit Twister with a nonzero exit code.
This is because None statuses, although incorrect,
are currently common.
Inconsistent spacing in ERROR and FAILED fixed.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
scripts: Dmitri fix
Fix of a problem noticed by Dmitri
Removed unnecessary additional spaces when
printing FAILED and ERROR status.
Now TwisterStatus.get_color is used more.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
If the invalid short address (0xfffe) is specified,
configure the Enhanced Ack just for the extended address.
This is needed because Header IEs for Enhanced Ack must be
configured before the short address has been assigned to
the child.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Coverage for cmsis rtos APIS should is provided using simulation, we
should not build those on every platform we have. Avoid failures due to
incompatiblities in requirements coming from various boards and also
reduce churn and noise during testing and CI.
Fixes#80215
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The CAP tests used u_group->cig->index but the u_group->cig may
have been deleted when the stream is released, which meant
that u_group->cig == NULL when e.g. unicast_stop_complete_cb
was called and that could cause failing tests as the index
would just be a uninitialized value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change pins that are used for qdec nrf54h20dk to align with shield
(loopbacks) used in internal CI. This change is needed to start
qdec driver power management testing.
Signed-off-by: Piotr Krzyzanowski <piotr.krzyzanowski@nordicsemi.no>
If POSIX_API is not configured the close function is not available.
Use zsock_close instead.
Signed-off-by: Andreas Huber <andreas.huber@ch.sauter-bc.com>
Missed a few keys while moving to the new style twister.yaml file for
the intel_adsp platform. Add those back.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default frame rate is printed as a floating point number. Without
enabling CONFIG_REQUIRES_FLOAT_PRINTF, it is not printed at all. Fix it.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The documentation of "Kernel/Data Structures" incorrectly
states that 'all provided structures are uniformly unsynchronized;
access to them is not threadsafe by default'.
In reality, some of them are threadsafe and some are not.
This might discourage users from using threadsafe data structures
where applicable, or mislead users into adding unnecessary locks.
This proposal addresses the issue by specifying thread safety
for each provided data structure.
My assessment of thread safety is based purely on source code analysis;
hence an expert verification would be appreciated.
Signed-off-by: Vukan Turkulov <vukant@gmail.com>
Add myself "rghaddab" as maintainer to the ZMS storage system as I am
the author of this new storage solution
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
As per its creators, CMake is written with a capital "M".
The initial reason for this change is that I want Twister to print
"ERROR : CMake build failure" instead of "ERROR : Cmake build failure".
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The initial note about the install guide for different distributions
can be easily overlooked. Add a second note to make it more prominent
in the first step.
Signed-off-by: Timon Skerutsch <zephyr@diodes-delight.com>
SOCs using ECC require the SEGGER RTT control block address to be
provided to the tooling, as the SEGGER tools will not scan the memory
range of ECC ram. Add documentation making this clear to boards with
these SOCs.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add myself to the collaborator list of flash to contribute to the work
of enhancement of flash API
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
sqrtf() is used for floats but the argument and resulting
variable are both doubles. LLVM would complain about
implicit conversion from float to double. So use sqrt()
instead as it is used with doubles.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
the script shows an incorrect file name, I check the wrong file first, then
I find the script did not print the current reading file name.
Fix this to prevent others from wasting their time on this.
The new error message:
```
[1/179] Generating syscalls.json, struct_tags.json
Error decoding zmk/.../altera_msgdma.c (included in zephyr/.../ethernet.c)
```
Signed-off-by: Sa Sasu <i@sasa.su>
The minimal libc is currently built as a zephyr_library and will be
included in the final link line as such. However, the c_library property
will still be set as "-lc" (for most linkers) and will be added to the
link line. This effectively requires that a separate libc implementation
be available in the toolchain and makes it possible to accidentally pull
from the non-minimal libc.
This doesn't seem desirable, so try to prevent this by clearing the
c_library property if we are using the minimal libc.
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
The stream flash test has been written with SoC internal
storage in mind and its simplified structure does not take
into account possibility of existence of devices with
different erase characteristics, at run time.
The commit fixes the test failing with Nordic bords that
have CONFIG_SPI_NOR=y set by default, which made test
to behave like device with erase capability has been tested.
The commit sets CONFIG_SPI_NOR=n for nrf54l devices.
Fixes#79181
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8 to the list for use with x509
certificates. The LWM2M v1.1 specification says that a LWM2M client
which used X509 certificates must support this ciphersuite and
additional ciphersuites may be supported.
Signed-off-by: Jeroen Broersen <jbroersen@interact.nl>
Add log statements for each command, event and response
for debugging purposes.
Tests do not send enough of these to clutter the IUT logs
and it is useful for debugging to more easily determine
what command triggered a function call or when the
responses and events are sent to the AutoPTS client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a check to ensure that all zephyr_file/zephyr_raw links are pointing
to valid paths in the current zephyr tree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
In preparation of adding a check for dead references, this commit fixes
currently broken zehpyr_file: links.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
During secure association, if we get any data packets from the
networking stack (as we switch off the dormancy) then they will be
dropped till the 802.1x port is authorized, but with recent changes the
corresponding network buffer isn't freed causing a memory leak.
Handle this case and free the network buffer (Using an OSAL API though
it's Zephyr to avoid duplication and also getting access to "struct
nwb");
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
lots of values from the DT where not set corretly, if
`CONFIG_SPI_NOR_SFDP_RUNTIME` was
enabled. This fixes it.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Without this, check_compliance.py suggests to run clang-format on the
changed code lines.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This change extends what e1e19732bc
(samples: drivers: crypto: Aligned AES key) has started: For certain
architectures (i.e. Si32), the alignment of the used buffers is
important as the AES HW engine uses DMA and inherits its restrictions.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Commit e1e19732bc (samples: drivers:
crypto: Aligned AES key) introduced the alignment for the key. According
to the commit message, the intention was to align the variable at 32 bit
boundaries. For this reason, passing 32 to __aligned seems like an
error, as its argument is denoted in byte and not bits.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
To accommodate for some slow tests on up2.
For example: tests/arch/x86/info/arch.x86.info.userspace
Execution time of this test is close to 55s and sometimes
above up to the 60s.
Related issue: #80134
Signed-off-by: Artur Wilczak <arturx.wilczak@intel.com>
Fix incorrect header file pre-macro names in
'include/zephyr/app_memory', 'include/zephyr/display'
and 'include/zephyr/mgmt'.
Signed-off-by: James Roy <rruuaanng@outlook.com>
The MCUmgr statistics only work correctly when selecting
MCUMGR_SMP_LEGACY_RC_BEHAVIOUR option. Checks the option
flag on the stat_mgmt_list and fix the behavior.
Fixes: 80476
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
LTO support was added with Zephyr 3.6.0, and it has been used in
production with Nordic devices for a long time. Remove the experimental
label to mark it ready for production.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Set soc_root using Path to avoid wrong generated path in the list of
soc_roots and other roots read from module.yml file
Fixes#80531
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a missing 'default y' for the Kconfig option indicating that
encryption is supported with the current configuration
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
`+C*REG:` may be received as AT read command answer
or unsolicited notification.
Their syntax differs, and even the overall parameter count varies
depending on what `<n>` is used in the `AT+CEREG=` write command.
To handle all cases properly, check the parameter count and
the presence of the `<tac>` parameter (which is a string and
thus begins with `"`) to figure out what is the position of `<stat>`.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Main changes since v2.3:
* Support for immediate RSSI measurements during abort reevaluations
* Several minor improvements in the base components, including
tolerating better under-setup docker images, improved C++
compatibility, a new sanity check for problematic user provided
sim_ids, and other minor improvements.
Note: Like before, bsim remains fully backwards compatible
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commits defines the `#power-domain-cells` properties for fakedomain
nodes in the HiFive Unmatched devicetree overlay file.
Without this change, this tests fails to build for the `hifive_unmatched`
Zephyr target.
Fixes#80503.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Do not select HAS_SEGGER_RTT unless the segger module is present. This
avoids a Kconfig error when SEGGER's debug module is not present in the
west manifest
Fixes#80529
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The coprocessor number in ARM `mrc` and `mcr` instructions must be prefixed
with `p`.
GNU assembler allows specifying coprocessor number without the `p` prefix;
but, LLVM assembler is more picky about this and prints out "invalid
instruction" error otherwise.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Fixed typo in Renesas RA SCI UART configuration that was preventing
hardware flow control from being enabled.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Remove wifi sample config files for esp32c2/esp8684, as device
isn't able to run it after memory layout update.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
this flushes the rx buffer before the
start of a new transaction. It is needed
because the litex bios is not always
reading the rx buffer.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
This reverts commit 6d4031f96c.
Those makes majority of builds og platforms with blobs tainted although
the blob were not used or compiled in. So it is very misleading.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
when no rx data need to be read set the rxignore bits.
with this change the dma setup is faster and no unnecessary
dummy writes are done to memory.
Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering>
when sending multiple bytes only the DMA_STATUS_COMPLETE
status is interesting. otherwise the semaphore will be signaled twice.
Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering>
There is a typo in the part number list for LPC55S69. The
LPC55S69JET98 should be LPC55S69JEV98.
Fixes#80541
Signed-off-by: David Leach <david.leach@nxp.com>
It's not possible to get pinconfig of specific pin
in ambiq_gpio_port_get_raw function, change to use
OR value of RD and WT registers for one group of gpio.
Signed-off-by: Hao Luo <hluo@ambiq.com>
Instead of forcing a definition in Devicetree. Right now, SoC DT files
contain this default, but it should not be part of SoC DT files.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add variant for the coex interface and move the coex interface out
if the wifi/control interface variants.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Exclude the coex interface if the coex variant of the nrf7002eb
is selected instead of adding the interface alongside the
wifi/control interface.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The nrf7000, nrf7001 and nrf7002 expose a coex hardware interface
which is independent from the wifi/control interface (spi and
control pins)
These interfaces where previously combined into a single model. This
is incompatible with the actual usage of the interfaces where one
core may interact only with the coex interface, and another with the
wifi/control interface.
This commit moves the coex interface, commonly described in
"nordic,nrf70-coex.yaml", out of the wifi/control models
"nrf700<variant>-<bus>.yaml" to its own models
"nrf700<variant>-coex.yaml"
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Larger image partitions require more space in DRAM due to
the increase in .bss.sector_buffers.
Each sector in .bss.sector_buffers consumes 16 bytes.
In the worst case scenario, such as with the ESP32S3 N32R8V,
which has 32 MB of flash and most likely 12 MB image partition,
an addition of 0xc000 should be sufficient to accommodate this.
Signed-off-by: Nik Schewtschuk <nikita.schewtschuk@smartmechatronics.de>
This header requires bluetooth.h but was not including it itself.
Due to this we had 2 tests failing to build.
Let's just include the dependencies to this header instead of
relaying on users including the dependencies dependencies in
the right order.
Also, let's add an include guard as in a test this header was
included twice leading to weird build errors.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In 82d8f09de1
the bt_conn_foreach prototype was changed, but these unit tests
kept using the old prototype which leads to a build warning.
Let's fix the prototype in the tests.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
- Modify the macro in source code AGT to get the right data from
device tree
- Modify name of agt node
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
uart_irq_tx_complete is implemented by z_uart_async_to_irq_irq_tx_ready
which changed recently (5bd53b6e2) to return positive value that may be
bigger than 1. uart_irq_tx_complete shall not return value bigger
than 1.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Added casts to uint32_t in arch_timing_cycles_get() to handle the
wrap-around of the 32-bit cycle counter correctly.
Signed-off-by: Simon Tomschik <simon.tomschik@askgroup.global>
This is a bug fix for adxl345_accel_convert_q31 functions.
Functions are used to convert samples received from
sensor to q31_t format when RTIO stream is used.
Signed-off-by: Dimitrije Lilic <dimitrije.lilic@orioninc.com>
What is changed?
arch32 related changes in linker script made in commit
ad71901490
are reverted.
Why do we need this change?
The main intention of the previous commit was to fix the
broken ci for aarch64.
There was no issue reported for aarch32 and changes were made for
consistency.
However, it looks like keeping the `__kernel_ram_start`
outside of the bss section works differently for different boards.
For fvp_baser_aemv8r arch32, _bss_start points to _rom_region_end and
__kernel_ram_start points to some region between _rom_region_start and
_rom_region_end which leads to test failure.
While for other board like v2m_musca_b1, _bss_start and
__kernel_ram_start are same.
The linker scripts might need a cleanup to avoid issues because of
these inconsistncies however, till we understand this better,
we need to revert this change.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Commit 52e8b1058c (doc: project: clarify
WG member eligibility) broke the link to the collaborator section by
using nested inline markup, which is currently not supported:
https://docutils.sourceforge.io/FAQ.html#is-nested-inline-markup-possible
As the various workarounds are not recommended by Docutils, this change
simply ends the bold formatting before the link.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The second condition needs to check ARP probes only
The ACD is not properly implemented as described in RFC5227 ch. 2.1.1
The implementation incorrectly detects an IP conflict, if an ARP request
is received for the target IP.
The reason is that the current implementation checks for ARP requests
instead of ARP probes.
Signed-off-by: Andreas Huber <andreas.huber@ch.sauter-bc.com>
_xtos_pso_savearea and _xtos_core_restore_nw have been renamed to
xthal_pso_savearea and xthal_core_restore_nw in recent Xtensa
toolchains. Rename them in reset_vector.S to prevent linker errors
when building Zephyr with Xtensa toolchain.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
uart_poll_out had 1 ms timeout which is too short for lower baudrates.
Increase to 10 ms.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This resolves some addressed comments in this PR
https://github.com/zephyrproject-rtos/zephyr/pull/77930
It adds as well a section in the documentation about some
recommendations to increase ZMS performance.
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
Cleanup notrun tests with the -M option. This is used in the weekly
build and fails because devices will run out of space.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We no longer render Doxygen content in Sphinx after the removal of
breathe, so let's remove rst related aliases from Doxyfile. Also adjust
some headers that contained rst content.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
It's already mentioned in the board.tmpl template file as well as in
documentation writing guidelines so fix this leftover and make sure
people contributing boards aim for webp format as it helps with file
size while supporting transparency.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- Update GDMA and ADC drivers and remove deprecated entries.
- Rebased hal_espressif to latest bump sync.
- Added ESP Timer and Radio common config values
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Make sure all kconfig related to Wi-Fi is
in its driver area.
This commit also removes esp_timer_init() call
from Wi-Fi driver.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Updates to project configuration extras to build with
Zephyr Controller.
Configure for 2 broadcast audio sources in 2 groups,
2 unicast audio source in 1 group and, 2 audio sinks
for 1 group for both broadcast and unicast usecases.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enabled Periodic Advertising Sync Transfer feature in the
Bluetooth Low Energy HCI Controller samples.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Align Kconfig values used with bt-ll-sw-split Controller as
same used in hci_uart sample.
Relates to commit 2c6306d099 ("Bluetooth: Controller:
BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU")'.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compile error when BT_CTLR_PRIVACY is disabled. Compile
error seen building hci_uart sample for nrf54l15dk.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the sample so that multiple advertising setup can
be reused in other sample if required. Bluetooth enable can
be in the sample that reuses the advertising setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix buf alloc timeout to 20 millisecond as the sent callback
can have a latency that is upto twice the ISO interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Restrict possible maximum stream synchronization to
implementation defined 2 stream, as structure declarations
in the implementation is limited to 2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect use of BIS indices to dereference the payload
array, instead correctly use synchronised stream indices.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Extended UICR will not be used as its configurations will be merged
with the UICR registers in NVR.
Memory maps changes are needed to align with pre compiled
firmware.
Signed-off-by: Håkon Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
This commit updates the CI workflows to use the CI image v0.27.4, which
includes nrf-regtool v7.0.0.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Files renaming done to better isolate zephyr related
functions from stm32 hal related functions
Signed-off-by: Alessandro Manganaro <alessandro.manganaro@st.com>
Make the SMPS_MODE define visible from drivers by moving it to soc.h
This define is for example used by the ADC driver to determine if sampling
should be synchronized with the SMPS clock.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
The Seeed Studio XIAO ESP32S3 Sense board is a board based on the XIAO
ESP32S3 board with a soldered B2B connector that allows to connect
an extension board with a camera sensor, microphone and the sdcard slot.
Signed-off-by: Patryk Biel <pbiel7@gmail.com>
In the `Board` class, the `dir` member was renamed to `directories`,
both to indicate that it is now a list (in HWMv2 with board extensions)
and to reflect the addition of the `BOARD_DIRECTORIES` CMake variable.
Considering that the build system also keeps the `BOARD_DIR` variable,
and for the sake of backwards compatibility and brevity, it should be
useful to retain `Board.dir` in Python as well, symmetrically.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Removes validating the qualifiers for flash run once configuration
as files may be present that contain information for qualifiers
that are not present in a single repository but are spaced out in
other repositories, or might be optional
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds an optional priority parameter to the flash runner run once
configuration which allows for deciding upon which file should
ultimately be used
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit adds new tests for verifying the functionality of the board
and SoC extension feature.
It does so by defining:
- A new CPU cluster on an existing SoC
- Two new board variants on top of an existing board
The new board variants are defined on top of the existing `native_sim`
board, so that the following native_sim board targets are available for
the test.
Existing board targets:
- native_sim/native
- native_sim/native/64
Extended board targets:
- native_sim/native/one
- native_sim/native/64/two
The new CPU cluster is defined for the existing `an521` SoC.
Existing CPU Clusters on an521:
- cpu0
- cpu1
New CPU Cluster:
- cputest
For SoC tests the mps2 board is used.
This means that for testing, the following board targets using the an521
SoC are:
- mps2/an521/cpu0
- mps2/an521/cpu1
- mps2/an521/cputest
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #72374
Support extending an existing SoC with new CPU clusters.
This commit introduces the following changes to allow an SoC to be
extended out-of-tree.
The SoC yaml schema is extended to support an extend field which
will be used to identify the SoC to be extended with extra CPU clusters.
A SoC 'a_soc' can be extended like this:
> socs:
> extend: a_soc
> cpuclusters:
> - name: extra_core
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #69548
Support extending an existing board with new board variants.
This commit introduces the following changes to allow a board to be
extended out-of-tree.
The board yaml schema is extended to support an extend field which
will be used to identify the board to be extended.
A board 'plank' can be extended like this:
> board:
> extend: plank
> variants:
> - name: ext
> qualifier: soc1
For the rest of the build system this means that there is no longer a
single board directory.
The existing CMake variable BOARD_DIR is kept and reference the
directory which defines the board.
A new CMake variable BOARD_DIRECTORIES provides a list of all
directories which defines board targets for the board.
This means the directory which defines the board as well as all
directories that extends the board.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup the Kconfig generating code in hwm_v2.cmake by moving common
logic inside the kconfig_gen() helper function.
This prepares the code for board extension feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The test implementation is based on a copy of the HFC multilink test.
The test verifies that the stack respects the reference counting of SDU
buffers when the L2CAP -EINPROGRESS feature is used.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This is shorthand for random static addresses. It's similar to
`bt_addr_le_from_str`, but is a macro that results in an object literal,
making it more versatile and less verbose.
This macro only gives access to the first 255 random static addresses,
but this ought to be enough addresses for testing.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Fix discrepancy in reference management between calls to
`bt_l2cap_chan_ops.recv` when the application returns `-EINPROGRESS`.
There are two call sites, `l2cap_chan_le_recv_sdu` and
`l2cap_chan_le_recv`, that were inconsistent.
`l2cap_chan_le_recv_sdu` moves the reference, and this patch updates
`l2cap_chan_le_recv` to do the same.
This behavior is also now documented.
This bug has existed since the introduction of this feature in
3151d26572.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
if alias or shorthand name is provided on the command line, we need
convert this to complete target name for the filters to work.
Fixes#80332
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
--device-testing implies runnable tests, this was the case before the
rework and was missed in one spot, so instead do that directly in the
argument parser.
Fixes#80428
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The commit splits default FCB scenario into one with endmarker
enabled, the original one, and one with disabled.
This allows to test the FCB in cases when CONFIG_FCB_ALLOW_FIXED_ENDMARKER
is set and not set.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
We use the name cell at a given index to retrieve
a clock's id.
But not all clocks provide a name cell, so use 0x0 as clock-id
for these situations.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
This commit fixes minor copyright issues and corrects the compatible of
gpio-stepper with the vendor name as zephyr
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Fix a set of warnings like:
drivers/wifi/winc1500/wifi_winc1500.c:332:25: error: cast from pointer
to integer of different size [-Werror=pointer-to-int-cast]
332 | SOCKET socket = (int)context->offload_context;
when int and void* do not have the same size, by casting the content
of context->offload_context to intptr_t which is whichever integer
size matches the pointer size.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The dacx3608 line supports a broadcast register so all configured channels
can output a singular value, simultaneously. This drastically reduces I2C
overhead when using multi-channel control. An API addition was necessary
to support a global broadcast channel number. The API addition does not
break the write_value() implementation for other DAC drivers in the repo.
This change is based on an out-of-tree driver developed internally to
handle this use case.
Alternative to the API change, could be a KConfig option or device tree
entry. Also, no support for the Broadcast channel was added to the
channel_setup() implementation - this may or may not be confusing. I
believe it makes sense to maintain explicit setup calls for each channel
intended to be configured.
Signed-off-by: Ben Booher <benbooher@pull-repo.com>
Added NXP IRTC Driver support and binding.
This driver is expected for users needing
Time Date info in their application.
The driver additionally has an alarm mode that
can be enabled to fire an intterupt when the time
and alarm values match.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
What is changed?
Updated the condition thats prevents mpu config for null dereference.
Added a new check so that mpu is configured for null dereference if
devicetree contains a memory-region node with:
- node address starting at 0
- size covered by the node is more than the null dereference page
size (0x400) and
- contains a memory-attr
Why is the change needed?
The check relied on flash base address to align with 0 for
configuring the mpu for null dereference but, a device tree
could have a flash starting at an address other than 0 and
still need the mpu config for null dereference.
The new extra check provides a way to connfigure mpu for
null dereference even if flash base address is not 0.
Note, though this change helps with mpu config for new boards having
flash address other than 0, this change does not change existing
behaviour for existing boards.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
What is changed?
- Added a new mps3 board an555 for the soc corstone310.
The qualifier to build/run application with board mps3/an555 is
`mps3/corstone310/an555` for secure and
`mps3/corstone310/an555/ns` for non-secure.
- Added FVP variant to enable FVP testing with corstone310
and it uses the ARM FVP `FVP_Corstone_SSE-310`.
The qualifier to build/run application with FVP is
`mps3/corstone310/an555fvp` for secure and
`mps3/corstone310/an555fvp/ns` for non-secure.
Why do we need this change?
- This enables FVP support and testing for corstone310.
- A separate FVP variant was added for AN555 because, the TFM board
used for non-secure variant differs for FPGA and FVP.
TFM board `arm/mps3/corstone310/an555` should be used when testing
AN555 with FVP and `arm/mps3/corstone310/fvp` should be used when
testing with AN555 FPGA.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
What is changed?
- Added a new mps3 board an552 for the soc corstone300.
The qualifier to build/run application with board mps3/an552 is
`mps3/corstone300/an552` for secure and
`mps3/corstone300/an552/ns` for non-secure.
- Added FVP variant to enable FVP testing with corstone300
and it uses the ARM FVP `FVP_Corstone_SSE-300_Ethos-U55`.
The qualifier to build/run application with FVP is
`mps3/corstone300/fvp` for secure and
`mps3/corstone300/fvp/ns` for non-secure.
- Note: the qualifier to build/run application with board mps3/an547
is now changed to
`mps3/corstone300/an547` for secure and
`mps3/corstone300/an547/ns` for non-secure.
How is it changed?
- Moved common code from mps3/an547 to corstone300.
- Renamed soc for an547 to corstone300 and added
a new soc corstone300/an552.
Why do we need this change?
- This enables FVP support and testing for corstone300.
- SOC/qualifier for mps3/an547 was renamed to reduce code redundancy
- A separate FVP variant was added for AN552 because, the TFM board
used for non-secure variant differs for FPGA and FVP.
TFM board `arm/mps3/corstone300/fvp` should be used when testing
AN552 with FVP and `arm/mps3/corstone300/an552` should be used when
testing with AN552 FPGA.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Clock source is changed from RC_SLOW to RC_FAST_D256 in order
to improve clock precision and avoid tests failing due to
lower precision of RC clock (around 10%).
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Include value of 30 us as not valid to set alarm for RTC counter.
Change included to allow RTC timer to be properly set to use
RC_FAST_D256 as clock source.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Recent WPA supplicant changes have broken nRF regulatory support,
implement the new set/get country WPA supplicant ops.
WPA supplicant: Regulatory SET through WPA supplicant, GET is direct to
the driver
Scan only: SET and GET direct calls to the driver
Fixes#79916.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Adds adxl362 streaming and trigger configurations to accelerometer
samples for profiling the performance impact of adding rtio support to
max32 spi and adxl362 accelerometer drivers.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Sets the trigger thread name for all adi sensor drivers to more clearly
identify the thread when tracing or debugging.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
This ensures that enabling BT_CTLR_DTM does not break the compilation of
the Bluetooth shell.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This allows to build the shell with BT_CTLR_DTM and/or BT_CTLR_ADV_EXT
enabled.
The issues has been introduced by commit
bf897cf941 (Bluetooth: Shell: Restructure
shell files).
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Before this patch, any unexpected socket error during poll (caused by
LTE disconnects for instance) would lead to a infinite loop because the
error state was never cleared, handled or even signaled to the user.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
This is a bug fix for adxl372_accel_convert_q31 function.
Function is used to convert samples received from
sensor to q31_t format when RTIO stream is used.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
Optimize function which enables UARTE peripheral. It is called
only when interrupts are locked so data->flags does not require
atomic operation. Use standard logical operations so save few
bytes.
Simplify uarte_disable_locked.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
So far new platforms did not use legacy shim but it shall
be now a default uart shim for all platforms.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Improved a workaround. When FIFO is not empty then FLUSHRX
task will generate RXSTARTED event to indicated that DMA transfer
was started. This property can be used to detect when FIFO was
not empty and workaroud a HW bug where RX.AMOUNT register is not
updated after flushing empty FIFO.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add runtime PM to the driver. When asynchronous or interrupt
driven API is used, there are 3 independent paths for enabling
the device: RX, TX and TX poll_out. TX poll_out requires special
handling because number of poll_out calls does not need to much
number of TXSTOPPED interrupts. To handle that special flag is
added. For standard RX and TX is simpler.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
A code ifdefed by UARTE_BAUDRATE_RETENTION_WORKAROUND was missing a
closing bracket. It was missed because CI did not compile any target
that is applying this workaround and enables code compilation.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Remove the use of floating point to calculate in
`pwm_rpi_get_cycles_per_sec` to fixed point calculations that result in the
same value. There is still a division here, which is somewhat slow still,
but the end result about twice fast for the whole path through the led pwm
code.
Even better would be to cache these values, since there is no interface in
this driver to change the configuration past init time.
Signed-off-by: David Brown <david.brown@linaro.org>
Zephyr 3.7.0 has been released and it is time to remove the migration
code added in 9cf07bbdb5 (bluetooth:
Rename rpmsg HCI driver and sample to ipc).
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The cache_size and lookahead_size are set at compile time using the
CONFIG_FS_LITTLEFS_CACHE_SIZE and CONFIG_FS_LITTLEFS_LOOKAHEAD_SIZE values
from Kconfig, or from the cache-size and lookahead-size properties in a
'zephyr,fstab,littlefs' compatible in the devicetree. Those values are
also used to statically allocate buffers that are pointed at by the
read_buffer, prog_buffer, and lookahead_buffer members of the lfs_config
structure.
At runtime, when using a block device, the cache_size and lookahead_size
are updated to be multiples of the underlying block device's block_size,
which may make them bigger than the original size used to allocate the
static buffers. Log an error and fail the operation when this occurs.
Signed-off-by: Phil Hindman <phindman@xes-inc.com>
Added check where stream_flash_erase_page checks if requested
offset is actually within stream flash designated area.
Fixes#79800
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The current selected start-up time takes 8 seconds to initialize.
When xosc32 is used as main clock reference it blocks the whole
initializarion of the system by that amount of time. This patch
relax that condition setting the initialization time to 62ms.
Fixes#79949
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Both ram and rom reports print their outputs in the console
and publish their reports in json.
footprint is wrapper to generate both reports but it is currently
not printing their outputs in the console nor given any feedback to
the user that those reports were generated.
Change it to behave like the others reports allowing the user to see them
and / or redirect to a file if they want.
Signed-off-by: Flavio Ceolin <flavio.ceolin@gmail.com>
Removed the LE Audio specific definition and instead
refer to the value defined by iso.h as it is ISO/Core
that defines this size, and not BAP/Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With the recent introduction of the SUIT manifest starter binary blob,
it is now possible to use it with the nRF54H20 during the flashing
procedure in order to provide a valid SUIT manifest to the system.
This PR introduces the code that handles programming the SUIT manifest
starter, as well as a new --suit-manifest-starter command-line option.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The format specifier for size_t is zu.
Using d only works when int and size_t are the same
underlying type which is not the case for 64bit systems,
which leads to a build warning in this case.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
There are issues with 64 bit compilation in hostap so disable
native_sim/native/64 board from the tests. The board will be
enabled again after updating the hostap from upstream and fixing
the issues.
Fixes#80437
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The bis_iso_qos.rx was missing in param sent in bt_iso_big_sync
Also, MSE = 0 is valid (fixed error check)
Signed-off-by: Lars Knudsen <LAKD@demant.com>
Add optional value parameter to dt_compat_any_has_prop
kconfig preprocessor function, which puts an additional constraint on
the truth of the function in that the property value must match the
parameter value.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
By defining this snippet it becomes simpler to build an application
for the Zephyr Bluetooth Controller in environments
where this is not enabled in device tree by default.
It removes the need for adding boilerplate overlay files
to applications.
Also, we would be able to add this snippet by default for
samples and tests where it is required to use the zephyr
link layer.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Reset value of this register is supposed to be 0 but I noticed on some
chip, it was not resetting to 0 on system reset, don't know why, but
this supposedly redundant clear is fine for now.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
These properties should eventually be removed from this binding as they
have been introduced to control soc specific clock trees and don't
correlate to anything in the IP, but for now just make them not required
and remove them from DT for SOCs that don't even use them.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
WS25Q512JV can only run at 104MHz at 3.3V, unless the read parameter
bits are changed. Since we don't reprogram these currently, reduce max
frequency to safe value
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This is a bug fix for adxl362_temp_convert_q31 and
adxl362_accel_convert_q31 functions.
Functions are used to convert samples received from
sensor to q31_t format when RTIO stream is used.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
For tests that support both targeting unit_testing and
other targets, we check in the cmake code the BOARD variable.
Let's allow users to set this to either of unit_testing
or unit_testing/unit_testing so it behaves like for other
tests.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix filtering done in
22c3438f1b
Otherwise we end up with tests defined twice, as a .unit and .zerphyr
variant but both run in normal builds, and none for unit tests.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use full board name in cmake file.
Akin to the fix done in
https://github.com/zephyrproject-rtos/zephyr/pull/80270/
following the changes from
https://github.com/zephyrproject-rtos/zephyr/pull/77250/
Note after the Zephyr cmake code has been run the BOARD
variable is split into BOARD BOARD_QUALIFIERS,
where BOARD does not contain the qualifiers anymore
(see cmake/modules/boards.cmake for more info).
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The truncation is not possible in practice but add suitable cast to
avoid the warning.
samples/net/sockets/echo_server/src/tcp.c:297:54: warning:
‘%d’ directive output may be truncated writing between 1 and 10 bytes
into a region of size 5 [-Wformat-truncation=]
297 | snprintk(name, sizeof(name), "tcp4[%d]", slot);
| ^~~~~~~~~~
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The NET_SOCKET_SERVICE_SYNC_DEFINE_STATIC() macro was changed
earlier but the compilation error was missed. Fixing the macro
call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The value of err was not initialized to 0 prior
to calling shell_strtoul, which only sets err
on actual error.
Signed-off-by: Lars Knudsen <LAKD@demant.com>
As the socket service API is currently used by mutiple applications
(dhcpv4 server, dns, telnet), it should be marked as unstable,
according to the docs:
https://docs.zephyrproject.org/latest/develop/api/api_lifecycle.html
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Fix the following warnings:
[255/261] Linking C executable zephyr/zephyr_pre0.elf
lto-wrapper: warning: using serial compilation of 8 LTRANS jobs
lto-wrapper: note: see the '-flto' option documentation for more
information
[260/261] Linking C executable zephyr/zephyr.elf
lto-wrapper: warning: using serial compilation of 8 LTRANS jobs
lto-wrapper: note: see the '-flto' option documentation for more
information
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Functions related to synchronization inputs and request generators were
present in the DMAMUX driver, despite being completely unused.
Remove them for compatibility with WB0 which lacks this hardware.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Remove the "required: true" attribute from the STM32 DMAMUX binding.
This is required for STM32WB0 series where the DMAMUX has no interrupt line
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
PR #79683 missed a few nodes introduced while it was under review.
Replace the remaining raw values with STM32_CLOCK in WB0 DTSI files.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
If PM is enabled, the radio must be configured to synchronize its
protocol timer with the low frequency timer.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Only initialize the HFXO Manager HAL driver if the HFXO is enabled in
DeviceTree, the device uses SYSRTC for timekeeping, and Power Manager
is enabled. HFXO Manager integrates with the Sleeptimer HAL driver for
SYSRTC to autonomously wake the HFXO prior to Sleeptimer wakeup from
deep sleep. It is not needed on devices that don't have HFXO-SYSRTC
integration, and it is not needed if the application doesn't use deep
sleep.
Add missing call to init_hardware() prior to init().
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Add basic device power management to USART driver. The initial
implementation only ensures that the TX FIFO is flushed before
allowing the system to go to sleep by polling the TXIDLE status
register.
This fixes an issue where the last 1-2 characters would be lost
if transmitted immediately before going to deep sleep.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
In addition to 'footprints' application data, execute transformation
step for all other applications listed in `plan.txt` to upload their
memory footprint reports to the ELK storage as well.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix nrf5340dk/nrf5340/cpuapp board name to align with HWMv2 changes
and resolve build error for its footprint data collection.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Removed the generation of broadcast id inside the stack. It is now up
to the application to generate this by itself. The CAP sample has
been modified to allow either a static broadcast, or a random one.
All of this is handled in the application.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
The 12-bit signed values for the results of PBR are a bit
cumbersome, so this adds a helper function to make it easier to work
with the HCI formatted steps.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
Add unit tests for bt_le_cs_step_data_parse.
Also exit early (without calling the function pointer) if the next
step would seem to read out of bounds.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
To improve broadcast sink sample robostness the max codec meta data
size configuration is increased to reflect the meta codec data sizes
seen for sources in market.
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
The sys_write32 function expects a value as the first parameter and the
memory location where the value should be written as the second parameter.
Signed-off-by: Nils Bosbach <bosbach@ice.rwth-aachen.de>
Add a generic function to retrieve any data based on an
assigned numbers type. This function can in theory be
used for any data type, and not just LE Audio types, but
since it relies on bt_audio_data_parse it was made
specificially for LE Audio.
The function can be used in cases where
bt_audio_codec_cfg_get_val, bt_audio_codec_cfg_meta_get_val,
bt_audio_codec_cap_get_val or
bt_audio_codec_cap_meta_get_val (or their derivation)
are not easily applicable due to the type constrainst.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a test to ensure that the LoRaWAN MCUmgr transport builds with
all options enabled and all options disabled
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Additional IO ports (6,7 and 8) are availble on the r7fa6m4af3cfb
variant of the RA6M4 Microcontroller.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Rework Nordic specific S2RAM marking procedures.
The S2RAM marking procedures must not disrupt the stack due to
the TLS pointer not yet being initialized during their execution.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
The S2RAM procedure requires marker checking after reset.
Such checking is performed on very early stage of the system initialization
and must ensure that the stack is not used due to the TLS pointer which is
not initialized yet.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
hci_packet_complete(buf, buf_size) should check whether buf_size is
enough.
For instance, hci_packet_complete can receive buf with buf_size 1,
leading to the buffer overflow in cmd->param_len, which is buf[3].
This can happen when rx_thread() receives two frames in 512 bytes
and the first frame size is 511. Then, rx_thread() will call
hci_packet_complete() with 1.
==5==ERROR: AddressSanitizer: global-buffer-overflow on address
0x000000ad81c2 at pc 0x0000005279b3 bp 0x7fffe74f5b70 sp 0x7fffe74f5b68
READ of size 2 at 0x000000ad81c2 thread T6
#0 0x5279b2 (/root/zephyr.exe+0x5279b2)
#1 0x4d697d (/root/zephyr.exe+0x4d697d)
#2 0x7ffff60e5daa (/lib/x86_64-linux-gnu/libc.so.6+0x89daa)
(BuildId: 2e01923fea4ad9f7fa50fe24e0f3385a45a6cd1c)
0x000000ad81c2 is located 2 bytes to the right of global variable
'rx_thread.frame' defined in 'zephyr/drivers/bluetooth/hci/userchan.c'
(0xad7fc0) of size 512
SUMMARY: AddressSanitizer: global-buffer-overflow
(/root/zephyr.exe+0x5279b2)
Thread T6 created by T2 here:
#0 0x48c17c (/root/zephyr.exe+0x48c17c)
#1 0x530192 (/root/zephyr.exe+0x530192)
#2 0x4dcc22 (/root/zephyr.exe+0x4dcc22)
Thread T2 created by T1 here:
#0 0x48c17c (/root/zephyr.exe+0x48c17c)
#1 0x530192 (/root/zephyr.exe+0x530192)
#2 0x4dcc22 (/root/zephyr.exe+0x4dcc22)
Thread T1 created by T0 here:
#0 0x48c17c (/root/zephyr.exe+0x48c17c)
#1 0x52f36c (/root/zephyr.exe+0x52f36c)
#2 0x5371dc (/root/zephyr.exe+0x5371dc)
#3 0x5312a6 (/root/zephyr.exe+0x5312a6)
#4 0x52ed7b (/root/zephyr.exe+0x52ed7b)
#5 0x52eddd (/root/zephyr.exe+0x52eddd)
#6 0x7ffff6083c89 (/lib/x86_64-linux-gnu/libc.so.6+0x27c89)
(BuildId: 2e01923fea4ad9f7fa50fe24e0f3385a45a6cd1c)
==5==ABORTING
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Add BT_AUDIO_RTN_PREF_NONE which indicates no preference from
the server for number of retransmissions chosen by the client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The aes_unwrap() and aes_decrypt() functions were missing
if CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_NONE is enabled.
Add missing C files to fix this.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Originally, the net_mgmt task priority is very low. Based on roaming
implementation, roaming is triggered in net_mgmt task. When running UDP
test while doing roaming, the net_mgmt task won't have much chance to
run and roaming can't be triggered.
Increase it to 3, which is same value of supplicant task.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Added new ops and events in glue layer to support roaming.
Added new flag WIFI_NM_WPA_SUPPLICANT_ROAMING to control roaming
feature.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Added missing `break` statement in `uart_ra_sci_callback_adapter`
for the `UART_EVENT_RX_COMPLETE` case.
Without it, `async_evt_rx_err()` would be called, which is not
the desired operation.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Unified switch-case usage in `uart_ra_sci_callback_adapter` to use
`break` instead of `return`.
Typically, a `break` is used in switch-case statements unless an early
return is necessary, in which case `return` is appropriate.
For this case, using a `break` statement is the more suitable choice.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
The board file used by twister is the normalized board target and not
just the board name.
Indicate this by changing plank.yaml to plank_<qualifiers>.yaml in the
board porting guide.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The `HCI_SPI` symbol is now automatically selected from devicetree,
removing the need for board specific defaults.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add dedicated Kconfig symbols for the two SPI backend variants. This
allows enabling the symbols by default from devicetree, and cleans up
the cmake logic.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The CSI is an NXP IP and the driver has been very much changed
by NXP, so add NXP copyright to it.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The CSI needs to be initialized BEFORE the camera sensor to provide
clock to the camera sensor. It is now possible to do so as direct
reference to the sensor via phandle is now removed. There will be
no check failure on the init order anymore when compiling.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The peer remote device "source_dev" can be retrieved from the
remote-endpoint-label. Direct reference via phandle is not needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Remove the obsolete comment about the init order of the CSI and the
camera sensors (e.g. mt9m114) which is not true anymore.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
As getting bytes per pixel of a pixel format is a very common operation,
add an utility function for it instead of repeating the same codes in
different drivers.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Instead of fixing csi2rx clock frequencies, set them according to the
pixel rate got from the camera sensor.
Signed-off-by: Trung Hieu Le <trunghieu.le@nxp.com>
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add set_ctrl callback to propagate controls to the sensor.
Signed-off-by: Farah Fliss <farah.fliss@nxp.com>
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The peer remote device "sensor_dev" can be retrieved from the
remote-endpoint-label. Direct reference via phandle is not needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The ov5640 camera driver now supports both MIPI CSI2 (DPHY) and DVP
modes. It is in MIPI CSI2 mode in this overlay. Add bus-type property
for this. In this mode, data-lanes property is required as well.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Change the bytes occupied by the ssid member in the wifi structure
to 'WIFI_SSID_MAX_LEN + 1' so that it can eliminate the
'-Wstringop-truncation' warning.
Signed-off-by: James Roy <rruuaanng@outlook.com>
nrf54h20dk_nrf54h20_cpurad by default has less RAM dedicated for
DMA transfers and default 1k buffer cannot be used for
uart_async_long_buf case. Use custom value.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
One of the test case is performing long transfers using 1k buffers.
For some targets there may be not enough RAM to perform such
transfers. Make long buffer length configurable.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The LPC55S36 board has an integrated MCU-Link debug probe, not an
LPC-Link2. Also, it is now possible to directly use the stock CMSIS-DAP
mode with the `linkserver` runner.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
HAS_SEGGER_RTT Kconfix symbol is missing in NXP MCXC series Kconfig.
Add the symbol to fix and enable Segger RTT samples.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Add the Kconfig menu to the sample configuration.
Update sample.yaml by adding the shield configuration.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
mcxc242 has usb device capability. Add usb to board documentation and
to the yaml file. Enable and configure it in board dts.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
USB configuration is missing in Devicetree for NXP MCX C series.
Add the configuration to common and SoC specific dtsi file.
Delete usb node for SoCs without USB support.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Some NXP socs with Kinetis USB do not have USB voltage regulator.
It causes build error in USB samples.
Fix it by enabling and disabling the voltage regulator only if
present.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Some NXP SoC's do not have USB voltage regulator present.
Add property to indicate it. Negative logic is used, because
the regulator is present in great majority of SoC's, and thus the new
property can be added only for SoC's without the regulator.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Similar to commit aeec014cbe, this
renames the identifiers to have prefix of "__llext_sym_name_"
instead of having suffix of "_sym_name" in LLEXT symbol tables
for SLID-enabled applications. This is needed to avoid confusing
the gen_device_deps.py script as it searches for objects (e.g.
__device_dts_ord_*) by matching name stems without regard to
suffixes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Replace "CONFIG_SOC_SERIES_STM32H7X || CONFIG_SOC_SERIES_STM32H5X"
by the compatble st_stm32h7_ethernet
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Add stm32h7 ethernet compatible "st,stm32h7-ethernet",
used also for stm32h5.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Adjust the testcase.yaml files to only allow running on native_sim.
These tests use mocking and are not meant to run on embedded platforms.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
The eswifi driver uses an integer to identify the socket used for each
connection, which must be cast to and from a `void *`. This causes
warnings on 64 bit platforms, as precision is lost when casting from a
`void *` to `int`. Use a `intptr_t` type to store the socket value to
resolve this warning. Also, fix a function signature for the `accept_cb`
to use `size_t` instead of `int` for the length
Fixes#80242
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fix the test for sending frames with the CAN_FRAME_ESI flag set. Sending
frames with this flag set in software is never allowed.
Fixes: 8023a58c2a
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Update the HW models module to:
aca798cf7cf0c5dc1fd89c66cf62670051feb8d0
Including the following:
* aca798c IRQ controller: Add missing prototype
* 4f108bc IRQ controller: Add API to check if int is pending
* a514448 MDK: provide replacement for SystemCoreClock*
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align with native_simulator's upstream main
51b27b67addd0073dc86e3d83f492c5cac5c3361
Which includes:
* 51b27b nsi_utils: Add macro for weak declarations
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This adds a user application that shows the usage of ZMS
The sample app shows three main functions of ZMS:
- read/write/delete key/value pairs
- fill all storage and delete it
- calculate free remaining space
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
ZMS is the abreviation of Zephyr Memory Storage.
It is a storage developed to target especially the non erasable devices.
The new memory storage system inherit from the NVS storage multiple
features and introduce new ones :
* Inherited features :
- light key-value based storage
- cache for entries
- Wear Leveling of flash memory
- Resilience to power failures
* New features :
- cycle counter for non erasable devices (instead of erase emulation)
- Keys up to 32-bit
- Built-in support of CRC32 for data
- Small size data (<= 8 bytes) integrated within entries
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
Introduces the concept of ll_scan_aux_chain, that allows for
keeping track of several advertising chains with a minimal
overhead. This replaces using several scan aux sets each with
an associated ticker IDs
Only one ticker is used for following chains; This is achieved
by having the scheduled chains in a sorted list and restarting
the ticker when the first in the list expires
EVENT_DONE_EXTRA_TYPE_SCAN_AUX now includes a pointer to the lll
structure to identify which chain to flush (to avoid race
conditions)
New implementation is hidden behind a config for now (defaults
to off): BT_CTLR_SCAN_AUX_USE_CHAINS
Other minor changes:
- rx_incomplete node pointer was moved to ll_sync_set
- data_len removed from ll_sync_set (it uses the chains instead)
Signed-off-by: Troels Nilsson <trnn@demant.com>
This sample executes some mathematical functions
that can be used for audio processing like
filtering (Fast Fourier Transform (FFT)) or
echo cancellation (Least Mean Square (LMS) filter algorithm).
This is an example that demonstrates how to include a proprietary
static library into the Zephyr build system.
The library is in an out of tree location.
To use this sample, with an out of tree library, one needs to define
an environment variable LIB_LOCATION.
If that is not defined, a default Zephyr API is used instead.
By default it uses CMSIS-DSP backend for math operations.
In README one can find more information.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Before communicating with the device, the driver needs to wait 300ms. This
moves all communication with the device from init to configure, such
that this delay can be avoided on startup by using zephyr,lazy-load.
Signed-off-by: Tobias Pisani <mail@topisani.dev>
Add Rubin Gerritsen as collaborator to the BT host and BT ISO.
He has been very active in these areas.
See for more info:
https://github.com/zephyrproject-rtos/zephyr/issues/80233
List the host collaborators in alphabetical order while at it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When ever `unack_queue_len` changed, should raise signal
`tx_queue_change` to let's tx_thread known queue changed.
Fixed the situation where the TX thread may no longer be sent out
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Added a note that udev rules must be configured in Linux environments.
Reformatted text accordingly.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
SDK installation has been simplified by introducing the `west sdk`
command. I updated the documentation to use this.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Linter pass makes CI happy and keeps code compliant
with the stylistic guidelines of the project
Signed-off-by: Rafael Laya <rafael_laya97@hotmail.com.com>
There is already a get_min_voltage() API, so let us add
an API to also query the max voltage
Signed-off-by: Rafael Laya <rafael_laya97@hotmail.com.com>
This updates the documentation of all the SiFive boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Element14 boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Cadence boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Franzininho boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the CThings boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Qemu boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the WeAct boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the "others" boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Contextual Electronics boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Rasperry Pi boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the DPTechnics boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Space Cubics boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the SECO boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Qorvo boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Firefly boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Ronoth boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Khadas boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Gaisler boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Croxel boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the EBYTE boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Raytac boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Kincony boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Renode boards to
use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Segger boards to
use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Texas Instruments boards to
use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Synopsis boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Longan boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Silicon Labs boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the bytesatwork boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Blue Clover Devices boards to
use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Aconno boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Atmel boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Witte boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Wemos boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Wurth Elektronik boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the WaveShare boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the VNG boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the VCC-GND boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the UDOO boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Toradex boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Telink boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Technexion boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the TDK boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the StarFive boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the STM32 boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Ruuvi boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the RAK Wireless boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Quicklogic boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Pine64 boards to use
the new `zephyr:board::` directive.
Also drops the "leaflet" image which really isn't adding any value.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Particle boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Panasonic boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the openISA boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Olimex boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Nuvoton boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the MXChip boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the MikroElektronika boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Microchip boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the MakerDiary boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the MadMachine boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the M5Stack boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the innblue boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Infineon boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Holyiot boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Heltec boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the HardKernel boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Google boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the GigaDevice boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Gardena boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Ezurio boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Espressif boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Electronut boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Efinix boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Dragino boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Blues boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the BeagleBoard boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the BBC boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Atmark boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Aspeed boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the AMD boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Ambiq boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Altera boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Alientek boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Analog Devices boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Adafruit boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Actinius boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the 01space boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Cast variable to uint64_t to ensure the multiplication is
performed using 64-bit arithmetic. Resolves static code
analysis warning from Coverity.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Power Manager no longer requires the Counter driver. This seems to have
been a hack to get the Sleeptimer HAL included in the build, as the
Sleeptimer is the real dependency of the Silabs Power Manager HAL.
Since Sleeptimer is now used for the OS timer, this hack is not needed.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Add OS timer implementation making use of the Sleeptimer HAL.
Sleeptimer integrates tightly with the Silabs Power Manager HAL,
and must be used as the OS timer to achieve optimal power consumption
when using the radio.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The DT node "stimer0" represented two different hardware timers,
RTCC and SYSRTC. Use the correct peripheral names for the nodes.
Add interrupt names and missing interrupt numbers.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
This option allows using the pm_policy_latency* APIs to gather latency
requirements on systems that do not support PM (e.g. systems whithout
CPU idle states). Because the API has a subscription mechanism, it can
be useful to perform system-level adjustments based on latency
requirements gathered from multiple system components.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
policy.c has grown organically, it contained many independent pieces of
code. This patch splits each logical unit into its own C file, making it
easier to browse the code.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The return values were not correct, and the parameters descriptions
were not too easy to understand.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The defines should explicitly be passed to nordic HAL as they dont' use
the CONFIG_ prefix.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Added test to verify deferred ACL Tx transmission setup,
such that GATT discovery completes with least latency and
GATT notifications can be received earliest after connection
establishment.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce deferred ACL Tx packet transmission setup by radio,
so that an enqueued ACL Data packet can be transmitted with
the shortest latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add defines for radio timer capture and compare indices used
in the nRF Radio HAL implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Removes support for B0 revision silicon. The B0 revision is no longer
recommended for use in host-controlled applications and there are no
users of this driver implementing B0 silicon in their final design.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Adds support for the control port write-lock feature introduced in
revision B1. The write-lock feature minimizes the risk of spurious
I2C writes flipping sensitive bits during device operation by blocking
writes to some or all of the register map.
If desired, the write-lock must be set in hardware by biasing PGPIO2
appropriately and setting the cirrus,hw-i2c-lock flag in the devicetree
entry.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Documents cirrus,hw-i2c-lock property in the devicetree bindings. This
flag indicates that the control port write-lock was enabled in hardware
via the PGPIO2 pin.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Adds support for revision B1 silicon when checking CHIP_REV. This
silicon revision introduces the hardware I2C lock.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Moves the CHIP_REV log message after the CHIP_REV switch case. Printing
the log message after allows for the print to be reused for multiple
CHIP_REV cases.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Use FIELD_GET macro to grab CHIP_REV bitfield. This change improves
the readability of the source code and does not change functionality.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
In case of multiple OSes running on different CPU Cores which share the
same GIC controller, need to avoid the distributor re-configured to avoid
crash the OS has already been started.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Add a pinctrl driver for Microchip MEC5 HAL based chips.
The driver removes the YAML enum "no change" property
value from the driver strength and slew rate properties.
Update the shared header file in mec soc common folder to
use a different Z_PINCTRL_STATE_PINCFG_INIT for MEC5.
Modifications to legacy MEC172x XEC PINCTRL will be in
a future PR.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
CMSIS SystemInit is not used in Zephyr. Implement the functionality
that isn't already done by Zephyr startup using soc_prep_hook().
The reason the lack of TrustZone init did not create immediately obvious
issues previously is that SMU faults can only happen if the SMU clock is
enabled.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
For easier recognition PHYTEC boards have been prefixed with the SoC name.
As the new hardware model includes the SoC and cpu, this prefixing is not
needed anymore. All PHYTEC eval boards have an individual and unique name
and can be found easily via this name.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
For easier recognition PHYTEC boards have been prefixed with the SoC name.
As the new hardware model includes the SoC and cpu, this prefixing is not
needed anymore. All PHYTEC eval boards have an individual and unique name
and can be found easily via this name.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
The CONFIG_DUMMY_DISPLAY is now enabled in conjunction with devicetree,
So, no need to be explicitly enabled.
Remove the setting.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The CONFIG_DUMMY_DISPLAY is now enabled in conjunction with devicetree,
So, no need to be explicitly enabled.
Remove the setting.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
As per dma_stop() documentation, the implementation has to not just stop
the transfer, but also to disable the channel. Before this commit, only
the transfer has been stopped.
Same goes for dma_start(). This also allows the enabling of a channel to
be removed from dma_si32_config().
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Replace OVERLAY_CONFIG with CONF_FILE since no-device-pm.conf
contains an alternative configuration to the one in prj.conf
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Replace OVERLAY_CONFIG with CONF_FILE since the file in question
contains an alternative configuration to the one in prj.conf
as clearly stated in the sample doc
'If you use poll you should also use `prj_poll.conf` instead of
`prj.conf`.'
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Move stm32_blk.conf ouside of 'boards' as this folder is meant to
contain only board-specific devicetree overlays and Kconfig fragments.
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Fixes: #80200
CMake `find_package(<package> <version>)` support the use of ranges,
like `1.0.0...4.0.0`.
Update the FindZephyr-sdk.cmake module to support this.
This allows looking up the Zephyr SDK with an upper boundry, for example
`find_package(Zephyr-sdk 0.16...<0.17)`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Die temperature polling sample is not enabled for frdm_mcxc242 board.
Add devicetree overlay and Kconfig configuration for the sample to
enable it.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Remove Kconfig dependency on SOC_FAMILY_KINETIS as the temperature
sensor is available also on MCX family.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Die temperature measurement is not configured in devicetree
for NXP MCX C series.
Add die temperature measurement configuration.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Bandgap voltage is used for on die temperature measurement. Bandgap
buffer has to be enabled explicitly to get correct tempearature.
Enable the buffer if TEMP_KINETIS is selected.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Commit f987e8c6f0a49b04a1184b1a36612612482e3d24 introduced a regression
where the is_ip check fails if no --id is passed as an argument.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Rework overlays and add sysbuild/vpr_launcher folder to allow standard
test configuration for nrf54h20dk cpuppr.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rework existing nrf54h20dk overlays to allow adding of
nrf54h20dk//cpuppr target.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In order to allow fiting test in targets with smaller memory make
large buffer configurable through Kconfig.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add support for building NXP WiFi. Since the driver typically requires
binary blobs, enable CONFIG_NXP_WIFI_BUILD_ONLY_MODE for this testcase.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Generated PEM headers need to be created before we build the WiFi shell
when WIFI_NM_WPA_SUPPLICANT_CRYPTO_ENTERPRISE is enabled, so add an
explicit dependency on the app target to be certain these headers are
created
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_MBEDTLS_HAVE_TIME_DATE, which will cause that mbedtls
include Zephyr time.h and leads to 'DIV_ROUND_UP' redefined warning.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Add CONFIG_NXP_WIFI_BUILD_ONLY_MODE, which allows the NXP WiFi driver to
be built without a binary blob. The built application will not be
functional, but this enables continuous integration to run upstream.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
set_btwt API implementation is not complete. Remove the structure
definition and implementation from the NXP WiFi driver to fix a build
error.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
ap_bandwidth API implementation is not complete. Remove the structure
definition and implementation from the NXP WiFi driver to fix a build
error.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
There's no need to add conditions to CONFIG_PWM_NRF_SW, because it is
already conditioned to DT status. Right now, if any system uses both
normal PWM and "SW PWM", it needs to manually enable the driver
Kconfig.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The "wifi ap config" command uses the station interface via
net_if_get_first_wifi(), and should use the ap interface.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
The nRF54 and nRF92 chips has data cache, which means
the ICMsg and ICBMsg must be configured to follow required
cache alignment of the shared memory.
The `dcache-alignement` needs to be defined for that.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
The driver now does not wait for the completion of a measurement
in the submit function.
Instead it schedule the fetch and the completion of the
submission queue entry as delayed work to the system work queue.
Signed-off-by: Florian Weber <Florian.Weber@live.de>
If multiple J-Links with IP support are used,
they can be selected with different ports.
The actual implementation is just using the default port.
Make the port selectable with <ip>:<port>.
Signed-off-by: Michael Arnold <marnold@baumer.com>
The previous changes in
https://github.com/zephyrproject-rtos/zephyr/pull/74304
assumed that because this is also handled in
`bt_hci_transport_setup` that it shouldn't be done on
initialisation too.
However, if someone wants to develop their own app which
uses BT and also wants to enable the CPUNET by default this
KConfig should be available to them.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
hwmv2 established a convention that boards live in a folder named after
the vendor prefix.
RAK Wireless boards apparently missed the memo :)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
.. target-notes:: is a useful directive that needs to explicitly be
included for a "References" section to really be useful. This commit
updates the doc guidelines accordingly to help ensure that future docs
are using it correctly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
For the "References" section to be useful, it needs to include a call to
the target-notes directive, which is the one that actually generates the
list of references made in the current document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
For the "References" section to be useful, it needs to include a call to
the target-notes directive, which is the one that actually generates the
list of references made in the current document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
regulator_npm1300_init() generated uninitialized variable warning.
Fix this by being consistent in the error checking in underlying function.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
It will increase test coverage for adc driver, no test uses
ADC_GAIN_2_3 setting yet.
Signed-off-by: Bartlomiej Buczek <bartlomiej.buczek@nordicsemi.no>
Tests are checking error codes returned from adc_read() and
adc_channel_setup() used with invalid configurations.
Signed-off-by: Bartlomiej Buczek <bartlomiej.buczek@nordicsemi.no>
The details of how the ICBMsg communication is done, are hidden
inside the source code. This specification adds details about
the ICBMsg protocol.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
The details of how the ICMsg communication is done, are hidden
inside the source code. This specification adds details about
the ICBMsg protocol.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
WPA control interface timeout is hardcoded to 10s, add a configuration
option to remove the hardcode, this is needed sometimes as a workaround
e.g., crypto taking too long to complete the request.
Work around for #79834, increase the default from 10 to 15s, in positive
case this will have no impact.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This is related to work on #79973 which creates build tests
for hostap with different configurations.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Try to compile test wifi with various configuration combinations.
This is trying to catch simple compilation issues in the PRs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Even if the enum contains the same values, the values might
change if the wpa_supplicant sources change or Zephyr values
change. In order to avoid weird errors later and prevent the
following warning, add a conversion functions for the enums.
modules/hostap/src/supp_api.c:1172:23: warning: implicit conversion
from enumeration type 'enum mfp_options' to different enumeration
type 'enum wifi_mfp_options' [-Wenum-conversion]
status->mfp = ssid->ieee80211w; /* Same mapping */
modules/hostap/src/supp_api.c:1190:30: warning: implicit conversion
from enumeration type 'enum wpas_mode' to different enumeration
type 'enum wifi_iface_mode' [-Wenum-conversion]
status->iface_mode = ssid->mode;
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "enum wpa_msg_type" was not found by default so add needed
include files to get the definitions.
modules/hostap/src/supp_main.h:61:57: warning: ‘enum wpa_msg_type’
declared inside parameter list will not be visible outside of
this definition or declaration
61 | void wpa_supplicant_msg_send(void *ctx, int level,
enum wpa_msg_type type,
const char *txt,
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Both the supplicant_set_btwt() and supplicant_ap_bandwidth() are
not found in Zephyr sources so remove them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_NONE is enabled, there
are lot of missing functions reported during linking.
Add missing C files to the compilation to fix this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Without this there is an error
modules/lib/hostap/src/crypto/fips_prf_internal.c:47: \
undefined reference to `SHA1Transform'
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The P2P support needs EAPOL support in order to avoid a compilation
error about missing eap field in wpa_ssid struct.
modules/lib/hostap/wpa_supplicant/wpa_supplicant.c:5102:65:
error: ‘struct wpa_ssid’ has no member named ‘eap’
5102 | eap_is_wps_pin_enrollee(&wpa_s->current_ssid->eap)) {
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The functions in ip-addr.c are needed in more places than just
for hostapd so add it unconditionally to the build.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Added helper functions to set and get broadcast name
for codec capabilities and codec configs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Build the C++ version of the Hello, World sample as part of the
multiplatform (build) test in CI.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Implemented:
* Central sync to broadcaster, connects to peripheral and
transfers sync. Peripheral Syncs to PA
* Broadcaster acting Central connects to peripheral
and transfers sync. Peripheral sync to PA
* Moved previous bis tests to test_bis.c and
new PAST tests was added in test_past.c
Signed-off-by: Lucas Mathias Balling <lutb@demant.com>
If we get an error/rejection from the CAP acceptor when
performing the Unicast Audio Start or Stop procedure then
we need to abort the procedure and let the application determine
what the next step is.
This change triggered a corner case when connecting to multiple
CAP acceptors as the CAP initiatior. This was also fixed as part
of this.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the CIS for a BAP stream is not connected, we cannot truly
be in the disabling state (the only state the stop operation
can be performed by the unicast client).
The reason for this is that if the CIS is disconnected, then
the ASCS server shall transition to the QoS Configured state
regardless of whether it has received a receiver stop ready
command from the unicast client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Changed dependency of the BT_BAP_SCAN_DELEGATOR to GATT_DYNAMIC_DB
from 'select' to 'depends on' and solved all loop dependencies
caused by this change.
Fixes#79108
Signed-off-by: Babak Arisian <bbaa@demant.com>
There was a kconfig option used in v1 logging to get clean
output in the immediate mode. It was lost during the transition
to v2 but Kconfig remained. Adding spin_lock to log processing
to ensure that log messages are not interleaved in the output
in the immediate mode.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The own_addr_type used for various HCI commands sometimes
had a BT_HCI_OWN_ADDR_* type value or a BT_ADDR_* type
value. Those are 2 different value spaces, and if the public
address types would ever change, it would start have incorrect
behavior.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit fixes the following issues for adp_xc7k/ae350
1. Incorrect copyright due to copy-paste error
2. Separate RAM region for the host and remote clusters
3. Allocate hart 0 for host and hart 1 for remote cluster
4. Use mbox channel 9, 10 for the sample, leaving channel/irq source
1 ~ 8 for ae350 8-core IPI
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Andes MBOX PLIC-SW use the same hardware as intc_plic driver. Reworked
mbox_andes_plic_sw implementation to leverage the intc_plic driver.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Renamed andestech,plic-sw to andestech,mbox-plic-sw because the mbox node
is based on the PLIC interrupt controller node instead using the plic
hardware directly.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Andes AE350 integrates 2 PLICs in the platfrom, one for external interrupt
and another for IPI. Adusted Kconfig for total IRQ numbers and support 2
aggregators in the 2nd level interrupt controller.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
The plic-sw is the same hardware as the plic interrupt contoller and should
be used with intc_plic driver instead of separate mbox driver.
Renamed plic-sw node from "mbox: mbox-controller@e6400000" to
"plic_sw: interrupt-controller@e6400000".
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
The rom_mpu_padding section is incorrect NAPOT padding for the address of
__rodata_region_end when ROM_BASE is not 0x0, because __rom_region_start
is set to the offset of rom_start section.
Fixed this by use "__rom_region_start = ABSOLUTE(.);" to keep both
__rodata_region_end and __rom_region_start are absolute address.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
The ILPS22QS is an ultra-compact piezoresistive absolute pressure sensor
which functions as a digital output barometer, supporting dual full-scale
up to user- selectable 4060 hPa. The device delivers ultra-low pressure
noise with very low power consumption and operates over an extended
temperature range from -40 °C to +105 °C.
(https://www.st.com/en/mems-and-sensors/ilps22qs.html)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add a generic lps2xdf_config_int() API to configure device interrupt
mode, and implement the specific routines for lps22df and lps28dfw.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Move api_lps2xdf_handle_interrupt() API inside the CONFIG_LPS2XDF_TRIGGER
ifdef, because it should be defined only in that case.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fixes selection of a symbol that was done in a defconfig file,
when actually it should be done in a Kconfig file as a dependency
for the board
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add create_sink_by_name command that scans for broadcast sources
with BT_DATA_BROADCAST_NAME matching the name given to the shell
command.
Fixes#70837
Signed-off-by: Babak Arisian <bbaa@demant.com>
Add call to Z_SPIN_DELAY() to avoid issue in bsim where
time does not progress in loop causing other threads to
starve.
Signed-off-by: Johan Stridkvist <johan.stridkvist@nordicsemi.no>
DWC2 peripherals can have TxFIFO sizes configured to any value between
16 and 32768. The value configured during synthesis is the maximum value
the software can program. Designs that give full flexibility configure
the TxFIFO sizes to value equal to total SPRAM size.
Currently DWC2 driver does not have prior knowledge about the endpoints
used within available configurations and has to come up with TxFIFO0
value up front. The original approach was to use MAX(16, max allowed).
locations. Because DWC2 peripheral cannot have TxFIFO0 with size lower
than 16 locations, always the max allowed was used. This logic prevented
any IN endpoint other than EP0 on designs that have TxFIFO0 size set to
total SPRAM size.
Change the logic to MIN(2 * 16, max allowed) to have sufficient memory
available on flexible designs and allow simultaneous operation if
possible (i.e. when maximum TxFIFO0 size is at least 32).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
DWC2 otg OUT transfers are being used for SETUP DATA0, OUT Data Stage
packets and OUT Status Stage ZLP. On High-Speed it is possible for IN
Data Stage, OUT Status Stage ZLP and subsequent SETUP DATA0 to happen
in very quick succession, making all the three events appear at the same
time to the handler thread.
The handler thread is picking up next endpoint to handle based on the
least significant bit set. When OUT endpoints were on bits 0-15 and IN
endpoints were on bits 16-31, the least significant bit policy favored
OUT endpoints over IN endpoints. This caused problems in Completer mode
(but suprisingly not in Buffer DMA mode) that lead to incorrect control
transfer handling.
The choice between least significant bit first or most significant bit
first is arbitrary. Switching from least to most significant bit first
would have resolved the issue. It would also favor higher numbered
endpoints over lower numbered endpoints.
Swap the order of endpoints in bitmaps to have IN on bits 0-15 and OUT
on bits 16-31 to keep handling lower numbered endpoints first and
resolve the control transfer handling in Completer mode.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Rename the Silabs HCI driver to hci_silabs_efr32.c to better indicate what
hardware it supports. Also rename the associated devicetree binding and
Kconfig options to be consistent with the new driver name.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Boards under a folder that doesn't directly match a vendor prefix
incorrectly end up being categorized as "zephyr" since that's the only
prefix that is eventually found when navigating up the folder hierarchy.
This commits treats boards in the "others" and "native" folders as
special cases and associates them to an "Unknown/Other" category.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Updated imx8mm/n/p and imx93 Cortex-A Core supported features in board
yaml file, and also fixed ram size for the board.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Ensured flash size and partition size are specified in bytes
as required by the STM32 QSPI NOR driver.
Signed-off-by: Harry Jiang <explora26@gmail.com>
Check error codes when sending invalid frames:
- too big data payload;
- wrong set of flags.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
There is negative test for too high data bitrate.
Add test that checks too low data bitrate.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Update the board cmake to use xsdb runner, If users would like to
use default xsdb.cfg then need to pass the fsbl.elf binary via
--fsbl option when using west flash or twister commands.
Usage:
1) west flash --runner xsdb --elf-file kv260_r5/zephyr/zephyr.elf
--fsbl <path>/fsbl.elf
2) ./scripts/twister -p kv260_r5 --west-runner xsdb --device-testing
--device-serial /dev/ttyUSB0 --west-flash="--fsbl=<path>/fsbl.elf"
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
Add support for xsdb(Xilinx System Debugger) used with AMD's FPGA
and SOC platforms, it is a user-friendly, interactive, and scriptable
command line interface, by design choice it's expected that platforms
to have xsdb scripts present inside their platform code.
xsdb runner has bitstream and fsbl optional arguments, bitstream is
needed for fpga targets and fsbl is needed for SOC targets, added
support for both options.
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
remove k_work related code and change
the argument of the callback to `struct net_socket_service_event`.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Add PCI device IDs for common Intel Raptor Lake variants and Alder Lake N.
These all have cAVS2.5 audio DSP.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Numerically sort the PCI DIDs for cAVS2.5 hardware. This follows
the convention in e.g. Linux and coreboot and eases maintainance. No
functional change.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The "Detected cAVS 1.8+ hardware" message is misleading as it implies
some version of Intel cAVS hardware has been found, while in fact this
script supports also other types of hardware, including Intel ACE.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Clean up code documentation to drop references to platforms no longer
supported in the code. Continues the cleanup started in commit
086e4f84ed ("intel_adsp: cavstool: Remove
legacy code").
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Added a check in unicast_client_ase_discover_cb that if
no ASE was discovered, then it would stop the discovery
there instead of attempting to call
unicast_client_ase_cp_discover to discover the control point
which would not be useful to use anyhow.
This terminates the discovery earlier in case of the remote
side not supporting the audio direction we are discovering.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The default configuration for PINCTRL should not be set with
the other default configurations in .defconfig, instead select
a default value as part of defining the UART driver.
Signed-off-by: Andrew Davis <afd@ti.com>
Add initial SoC support for the TI J721E SoC series Cortex-R5 core.
TRM for J721e https://www.ti.com/lit/zip/spruil1
File: spruil1c.pdf
Signed-off-by: Prashanth S <slpp95prashanth@yahoo.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Use full board name in cmake file.
Akin to the fix done in zephyrproject-rtos#80270
zephyrproject-rtos#80270
following the changes from
zephyrproject-rtos#77250
In which twister now uses the full board name when calling cmake.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In case the host doesn't pull the new data from the endpoint, the work task
would schedule itself again delayed (at the max. priority). When there is
no terminal program or active application reading the endpoint this
results in a constant polling of the endpoint burning up to 5% of the
CPU cycles.
By using a atomic flag for tx busy, the polling is solved and changed into
a postponed execution of the next work task which saves up to 5% of
CPU cycles and allows a better real-time behavior for other tasks.
Secondly, if the TX interrupt is disabled but there is still data in the TX
FIFO (ring buffer), the implementation will continue to trigger subsequent
TX work and attempt to flush the data to the host.
Signed-off-by: Vincent van der Locht <vincent@synchronicit.nl>
DT_INST* should be used in MSPI_CONFIG or device tree value capture
will fail sliently and fall back to defaults.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
Switch from using direct `strtol` calls to `shell_strtol`.
This change leverages the extensive error handling provided
by `shell_strtol`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Since `<host>` is a mandatory argument, the (_mand, _opt) values
should be adjusted to 2 and 12, respectively.
Note that `_mand` includes the number of mandatory arguments,
including the command name (`ping` itself).
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This commit does the following:
1. tests set_callback and user_data
2. fixes the api as well as the drivers by passing user_data
back to the set callback
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
IS25LP flash chips have a similar P[6:3] register to the IS25WP series,
and need the same workaround.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
IS25WP flash chips support 133MHz only when P[6:3] is programmed, which
will not occur during the SFDP probe sequence used in the FlexSPI nor
driver. With the default P[6:3] value, the best frequency supported for
read instruction 0xEB is 104MHz, so set this for all boards using this
flash chip with the FlexSPI nor driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Some NXP boards program the read parameters bits (P[6:3]) within the
IS25WP flash device during init, which will result in JESD216 probe
commands failing (as the number of dummy cycles will be incorrect). Add
handling to force these volatile bits to their default value to the
flexspi flash driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Quad enable method 5 reads status register 2 (one byte), but then writes
to 2 bytes to the status registers, so we need to shift the output
buffer in order to manage this correctly.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Writing the quad enable bit on flash chips typically requires a write
enable instruction be issued before writing the non-volatile status
register, and the flash may remain busy briefly after programming this
bit. Add code to send the WREN instruction, and to wait for the flash to
finish programming after writing the status register.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Move the LUT used for probing to be stored in .data, instead of on the
stack. This reduces stack usage during probe by 192 bytes, which avoids
stack overflows that were occurring on some platforms.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Even in cases where the alt-addr is set, we can still use the INT pin
during probe. Some boards require this, as if a reset GPIO is not
defined the INT pin may still need to be toggled in order to initialize
the GT911 IC correctly.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit updates the CI workflows to use the CI image v0.27.3, which
includes Zephyr SDK 0.17.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit increases the test timeout for the wait queue benchmark tests
to 120 seconds because these tests frequently hit the default timeout of 60
seconds during execution.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We now use hwmv2 to list boards instead of relying on twister specific
config files.
One yaml files (twister.yaml for now) will have all the data needed for
all possible targets and variations of a board reusing most of the data
where possible and variations can override the top level data.
Twister keeps track of 'aliases' of boards and identifies that for
example native_sim is the same as native_sim/native, so either names
will be possible in both test yaml files or on the command line,
however, the reporting will always use the full name, so no there is no
confusion about what is being tested/built.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Following similar approach followed on spi_mcux_lpspi driver.
- Enabling DMA by default when SPI RTIO is selected to favor
non-blocking transfers.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Updated ADXL372 driver with RTIO stream functionality.
RTIO stream is using both FIFO threshold and FIFO full triggers.
Together with RTIO stream, RTIO async read is also implemented.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
Enable support for FRDM_RW612 with memc driver sample, using attached
aps6404l PSRAM.
Signed-off-by: David Missael Maciel <davidmissael.maciel@nxp.com>
Some instances of the FLEXSPI IP permit limiting AHB bus access so that
no memory access requests will straddle a page boundary. Add a property
to manage this setting.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
is66wvq8m4 PSRAM always requires the address to be left shifted by
5 bits, regardless of which FLEXSPI port it is on. Fix the addressShift
assignment to be unconditional
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The ADDRSHIFT bit simply left shifts the address written to IPCR0[SFAR],
(or the address used for AHB access), by 5 bits before sending it to the
attached memory. This bit does not have an effect on the base address
used to access the flash/psram device.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Transactions should result in a single transfer call not multiple
transfer calls. Transceive isn't supported by i2c and so the TXRX op
isn't validated for success anymore.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Transactions from RTIO should result in single calls to i2c_transfer.
This corrects the default handler to first count the number of
submissions in the transaction, allocate on the stack, and then copy
over each submission to an equivalent i2c_msg.
It also cleans up the helper functions to be infallible, taking only the
submission and msg to copy to.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
TXRX is meant specifically to handle a full duplex bus like SPI, I2C is
half duplex meaning only read or write can be performed at once.
Drop TXRX as a supported operation code for the default I2C submission
path.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Updated ADXL345 driver with RTIO stream functionality.
Added Trigger intterupt functionality. RTIO stream is using
FIFO threshold.Together with RTIO stream, RTIO async read
is also implemented.
Signed-off-by: Dimitrije Lilic <dimitrije.lilic@orioninc.com>
The commit introduced regression for hsdk4xd platform.
The hsdk4xd SoC setup from soc_early_asm_init_percpu need to be done
in early code before any C code execution.
The current approach has multiple issues
- we call function (which can be easily implemented in C for
this or other SoC) from the place where we haven't setup stack
pointer (so we can't use stack) - which is very error-prone
- we never return back from soc_reset_hook on hsdk4xd platform
So let's just revert it for now. If any other ARC SoC need to use
soc_reset_hook - than it can be implemented properly.
This reverts commit 8c32a82e47.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Fixes commit 1df078158f ("doc: build: Add signing page") that removed
the `imgtool` section from the `sign.rst` page.
rimage configuration was designed in a very different way from imgtool
configuration. The rimage doc section was following the imgtool doc
section and constrating the two approaches. Now that the previous
imgtool doc section has just been removed, some words like "different"
and "instead" don't make sense anymore. Drop them.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Adds a new shield definition for the Analog Devices EVAL-ADXL362-ARDZ
accelerometer shield. This shield provides support for an ADI ADXL362
3-axis accelerometer over an Arduino SPI connector.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Output the timestamp of the PPS timepulse when printing the fix
information, if the driver support the timepulse and it has started
toggling.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add an API function for retrieving the timestamp of the latest PPS
timepulse at the highest resolution we have available, the kernel tick
count.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add overlay for APARD32690 board and add a new test case to
test RTIO functionalities of SPI MAX32 driver.
Signed-off-by: Dimitrije Lilic <dimitrije.lilic@orioninc.com>
Implements the SPIO RTIO API. Refactors internal transcive
fucntios to work with both existing SPI API and RTIO functions.
When SPI_RTIO is enabled the spi_transcieve call translates
the request into an RTIO transaction placed in the queue
that device will execute.
Include the latest refacor changes of RTIO.
Signed-off-by: Dimitrije Lilic <dimitrije.lilic@orioninc.com>
Function dma_smartbond_set_channel_status() used incorrect
condition to release state lock.
In initialization function dma_smartbond_init() function
dma_smartbond_set_channel_status() was called for each DMA
channel and tried to release lock that was never taken.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Timer driver using Microchip 32KHz based RTOS timer as the kernel
timer tick. The driver uses one of the 32-bit basic timers to
support the kernel's k_busy_wait API which is passed a wait
count in 1 us units. The 32-bit basic timer is selected by using
device tree chosen rtimer-busy-wait-timer set to the handle
of the desired 32-bit basic timer. If this driver is disabled,
the build system will select the ARM Cortex-M4 SysTick as the
kernel timer tick driver. The user should specify RTOS timer
as kernel tick by adding the compatible properity and setting
the status property to "okay" at the board or application level
device tree. The driver implements two internal API's for use
by the SoC PM. These two API's allow the SoC PM layer to disable
the timer used for k_busy_wait so the PLL can be disabled in
deep sleep. We used a custom API so we can disable this timer
in the deep sleep path when we know k_busy_wait will not be
called by other drivers or applications.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Series 2 always uses the device init HAL, while Series 0/1 never do.
Create a separate soc.c for Series 2 to make both versions easier to read.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Swap from the deprecated device_init_* functions to clock manager
for clock tree configuration. Populate config headers using
device tree representation of clock tree and oscillator config.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Introduce bindings for Series 2 oscillators: HFRCODPLL, HFRCOEM23,
LFRCO and LFXO.
Add clock tree representation in devicetree `clocks` node.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Switch EFR32MG21 to use the device init HAL. This makes the init sequence
the same as the rest of Series 2.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
On Series 2, set the SYS_CLOCK_HW_CYCLES_PER_SEC Kconfig option from
DeviceTree, rather than separately configuring it in board-level
defconfig.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Defconfig was only available at the vendor and series level,
make it possible to have family specific definitions too.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The DC-DC converter was unconditionally initialized with default
settings on Series 2. Add device tree binding and nodes, and guard
call to init function. Map DT options to config header from HAL.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Move the CMakeLists.txt and Kconfig files from the hal_silabs tree under
modules/hal_silabs in the main tree. This also includes all Zephyr shim
code from the hal_silabs tree.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Enable USART1 that can be used with external periphs via Arduino pins.
LPUART1 can also be used on the same pins.
Tested with tests/drivers/uart_elementary
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Increases default size of stack used by work queue RX thread
from 1024 to 1280 to avoid memory issues.
After adding the buffer with the default size of 128
that is allocated on the thread's stack (see #77552),
there is too little stack left during heavy stress.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
First approach had to be reverted because it did not pass tests.
Take 2 attempts to use uintptr_t instead of a pointer and cast it
to the expected pointer when necessary.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
- add ITCM definitions (for LinkServer) in board.cmake
- update of soc.c to support RAM images (stack pointer)
- doc update
Change applies to both versions of the MIMXRT1170 EVK
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
The Thrift library makes use of POSIX C functions such as ctime_r(), which
are not part of the ISO C standard.
This commit adds a Thrift module-wide `_POSIX_C_SOURCE` feature test macro
definition in order to ensure that the required POSIX C functions are
available when compiling the Thrift library.
Note that this was not caught earlier because Newlib and older versions of
Picolibc did not properly fence off some POSIX functions behind the feature
test macros.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Thrift module tests were under the "newlib" namespace, presumably
because newlib was the default at the time of their introduction.
Since newlib is no longer the default libc and Thrift is not being tested
against multiple C libraries, this removes the libc type from the Thrift
test identifiers.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This new version introduces a new sub-command `uicr-compile`, which will
generate `uicr.hex` based on a new binary format required by an upcoming
release of Secure Domain Firmware (SDFW) closer to production.
Since this is a breaking change, and SDFW is not finalized yet, we need
to support two nrf-regtool versions for a short time, and use different
CLI invocations based on which version is installed. Hence, the minimum
required version is unchanged.
Additionally, retire CONFIG_NRF_REGTOOL_EXTRA_GENERATE_ARGS. There will
be no use for it moving forward.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Enable flash driver test for MAX32690 boards.
Signed-off-by: Mert Vatansever <mert.vatansever@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Extracts the max32 flashprog linker section to a dedicated linker script
that is conditionally included only when the flash driver is enabled.
This prepares max32 soc family to set SOC_LINKER_SCRIPT directly to the
common arm cortex-m linker script.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Add support for building and running the BT tester on the
nrf5340_audio_dk.
This is copying the configuration used for the nRF5340 DK.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use DT_*IRQN helper to get the IRQ number on systems with multi-level
interrupt configuration instead of IRQ number on particular interrupt
controller.
Signed-off-by: Michal Simek <michal.simek@amd.com>
If CONFIG_NET_PKT_ALLOC_STATS is enabled, then "net mem" command
can show net_pkt allocation statistics like succeed / failed
allocation counts, average sizes and allocation time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Though nRF7000 is a special Scan only chipset, scan only can work with
any nRF70 platforms, no need for this enforcement and we can keep things
flexible.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In addition to matching zephyr, prefixed bindings, match common bindings
(assuming that common bindings are those that do not have any prefix)
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Consolidate the testcase.yaml definition for the display sample where
possible to use a single testcase for all shields. This won't work for
all testcases, but helps avoid the pattern where a new testcase using
"platform-allow" is added for every shield/board combination that needs
to be run with this sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
What is changed?
Twister tests and sample applications can now run successfully again
for `fvp_aemv8r_aarch64`.
`__kernal_ram_start` is also modified for cortex_m and cortex_a_r
to be consistent with aarch64 linker script and avoid such issue in
the future.
How is it changed?
Modified linker script to make sure that `__kernal_ram_start` to
`__kernal_ram_end` includes both, bss and data, sections as before.
Why do we need this change?
Twister tests and sample applications failed for `fvp_aemv8r_aarch64`
and it was found that commit #87f68b4dfed14eb08132fe9798fb209f1bed64f2
moved the bss section but missed moving the __kernal_ram_start to the
data section which resulted in a crash.
The change is tested with FVP_BaseR_AEMv8R version: 11.27.19.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Enable CONFIG_CONSOLE in the Segger RTT console snippet as this is a
dependency for CONFIG_RTT_CONSOLE.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Test was failing because after re-enabling QDEC there is an interrupt
REPORTRDY coming after some time. Test had k_msleep(100) added to
accomodate for that but it was added after sensor_sample_fetch and
should be added before so that sample with data from REPORTRDY event
is fetched so that next read is empty as expected.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This patch adds tests for the wifi_credentials library.
Both the main functions and the backend implementations are tested.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
This patch adds a feature to directly connect to stored Wi-Fi
credentials without having to compose the NET_MGMT commands yourself.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Upstream NCS's library for storing Wi-Fi credentials.
This library allows storage of Wi-Fi credentials
using different backends.
Either the Zephyr settings subsystem
or the PSA secure backend can be used.
For testing purposes, credentials can be defined statically.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Signed-off-by: Gregers Gram Rygg <gregers.gram.rygg@nordicsemi.no>
Signed-off-by: Kaja Koren <kaja.koren@nordicsemi.no>
Signed-off-by: Simen S. Røstad <simen.rostad@nordicsemi.no>
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Currently GCC complains that temp64 may be used uninitialized in this
function. Adds a check to ensure time is valid before assignining
and fixes GCC warning.
Signed-off-by: Brandon Allen <brandon.allen@exacttechnology.com>
This updates the documentation of all the Seeed Studio boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
A new zephyr:board:: Sphinx directive allows to flag a documentation
page as being the documentation for a specific board, allowing to
auto-populate some of the contents, ex. by adding a board overview a la
Wikipedia, and later things like supported HW features, etc.
A corresponding :zephyr:board: role allows to link to a board doc page.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Load the board catalog only once at build-inited time so that
it's cached and enabled things like boards, vendors, and socs
to eventually become first class Sphinx objects.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This might be a leftover from a previous version but this is basically
silencing all Sphinx logs when generating the catalog from Sphinx -- not
good!
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This makes dictionary entries from the boards catalog more
self-contained as the name of the board is now included in the entry.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Small change to the way image are stored in the catalog so that we know
where the source image is rather than anticipating on the final path
after build has happened. This allows to potentially reference the
source image from e.g. directives.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Added the battery critical status char to bas service
as per bas_1.1 spec. Updated BSIM test for BAS service
to test the INDs of BAS critical characteristic.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
This makes sure we always fit all configurations. Worst case is two
audio streams in 48_6 configuration in single ISO channel (2x155).
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
For now this seems to be required by PTS as there is not Upper Tester
action for this in Test Specification.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
For transmit_message if the transmission is timed and underlying
driver supports `IEEE802154_HW_SELECTIVE_TXCHANNEL` then use
the selective txchannel feature for transmission.
This does not change the current `channel` at the moment of call,
the driver will transmit the message on the channel selected through
`net_pkt_set_ieee802154_txchannel` then (after receiving an ACK
if requested) it will return to the original channel.
When Kconfig option IEEE802154_SELECTIVE_TXCHANNEL is turned on,
the timed transmissions scheduled some time ahead on different
channel will not abort ongoing reception until the exact moment
of transmission comes.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The ieee802154_nrf5 supports the IEEE802154_SELECTIVE_TXCHANNEL
Kconfig option and advertises the IEEE802154_HW_SELECTIVE_TXCHANNEL
capability.
The ieee802154_nrf5 driver now allows to schedule timed transmission
requests with selective tx channel, that is set at the latest
possible moment. This improves reception performance when the
timed transmissions are requested.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The Kconfig `IEEE802154_SELECTIVE_TXCHANNEL` is added along with
the new capability `IEEE802154_HW_SELECTIVE_TXCHANNEL`.
The new capability of the ieee802154 drivers allows to schedule
CSL transmissions as stated in IEEE 802.15.4-2020 chapter 6.12.2.7
CSL over multiple channels. The benefit of the new API is that
additional call to `ieee802154_radio_api::set_channel()` is not
required. The drivers will switch to the new channel as late as
possible for CSL transmissions thus will not interrupt any reception
that might be in progress until the very late moment when the
transmission actually starts.
This improves reception performance when CSL transmissions are used.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Add wsen_hids_2525020210002 driver with
the corrected name and compatibility with
the hal update as well as added new features.
Signed-off-by: Wajdi ELMuhtadi <wajdi.elmuhtadi@we-online.com>
Updated ADXL362 driver with RTIO stream functionality.
RTIO stream is using both FIFO threshold and FIFO full triggers.
Together with RTIO stream, RTIO async read is also implemented.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
There is an issue where OUT data is not handled correctly when the
toatl length exceeds the MPS. This update fixes the control handling
for the OUT endpoint.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
The ready bit is automatically cleared by hardware. When setting other
bits, there is a chance that the ready bit hasn't been cleared yet,
leading to unexpected USB transactions. This commit addresses this
isuue and locks irq for critical section to prevent racing condition.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
The IT82xx2 chip has three FIFOs shared across endpoint 1 to 15, and
the FIFO control register is configured based on the active endpoints.
However, there are some issues with FIFO control.
Firstly, when a TRANS_DONE interrupt occurs, the completion of the
transaction should be determined by the ready and enable bits of the
corresponding endpoint. Additionally, only one non-control IN endpoint
can access the IN FIFO at a time. The FIFO control register is selected
before writing data and cleared after the IN transaction is completed.
For OUT endpoints, all endpoint bits must be selected in the OUT FIFO
control register when the endpoint is enabled. This can result in fake
OUT tokens being detected if an interrupt is triggered by another FIFO.
To prevent this, an atomic out_fifo_state variable has been introduced
to handle the detection of fake OUT tokens.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
Apply this overlay to test RFU_BTN1 and RFU_BTN2 on PCAL6524.
The user buttons RFU_BTN1 and RFU_BTN2 is connected to i.MX 93 GPIO by
default, but can be changed to connect to onboard GPIO expander
PCAL6524. To do this, switch SW1006 to 0000, then switch SW1005 to 0101.
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
Add support for Bosch bmp390 sensor, the drop in replacement for the
bmp388 with same register but different chip-id. This patch make use
of "bosch_bmp390" or "bosch_bmp388" and set the specific chip-id in a
data->chip-id variable, which then used to check against the register
value.
Additional, manual shift operation had been replaced with ENDIAN safe
macros and calibration values with target variable of int16_t add a
cast for it.
bmp388_spi: read register implementation wrong, fixed it.
tx-buffer must be <addr><dummy><dummy> in order to receive the
register value. Read registers in burst mode and have rx and tx
buffer same spi_buf to avoid clock stop and delay with nrf5.
Signed-off-by: Chris Ruehl <chris@gtsys.com.hk>
The NTC thermistor implementation assumes a constant pull-up voltage
and that the ADC channel is measured against a reference voltage so that
the absolute voltage across the NTC can be calculated. Based on the
relationship of `pullup-uv` and this absolute NTC voltage, the resistance
of the NTC is calculated.
There are applications where the "pullup-uv" is not constant, but VDD.
Most ADCs support relative measurements against VDD. If `pullup-uv` is not
defined, the implementation assumes now that the ADC channel is configured
to use VDD as a reference and therefore no millivolt conversion is
required.
Signed-off-by: Stefan Schwendeler <Stefan.Schwendeler@husqvarnagroup.com>
There were some copy and paste errors that were easily missed where the
wrong print out would happen of an argument with `info` and an extra
autocompelete would happen with the `speed` command.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Add test suite which uses GPIO loopback to produce a "very low" and
"very high" voltage at the positive input of the comparator using the
output of a GPIO. The negative input is set to a voltage between the
high and low output voltages of the GPIO using whichever internal
reference is available to the comparator.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Fix couple of bugs in exit path:
- In case of calloc failure, return's without unlocking
- memory is freed outside lock, in case of a tiny window of race, this
can cause a crash when this function is called from two threads.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
During Wi-Fi connection UMAC sends an unsolicited regulatory change
event but the driver code always assumes that this event is solicited
hence doesn't free the memory for the event.
Fix this by dropping the unsolicited event as it's not supported yet.
Fixes#79733.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Use int instead of ssize_t for select_get().
This eliminates the unnecessary need for POSIX types.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Change regex for no_multithreading test version for nRF54L15 platform.
This needs to be changed because LOG is running in MINIMAL mode.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
This is implementation of ICBMsg endpoint deregistration.
The underlying ICMsg instance and blocks are not affected by
deregistration, so it is possible to reuse the same address
during the re-registration of the same endpoint.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
Add functionality to test the IGMP query handling. This test should
prevent the IGMP logic from sending IGMPv3 messages to IGMPv2 queriers.
The test does now also check backwards compatability when IGMPv3 queries
are received but only IGMPv2 is enabled.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
Add lock to fix race when uart_rx_disable is interrupted by RXTO
event which lead to driver state corruption.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
On uart120 BAUDRATE register is not retained when ENABLE=0 and
because of that BAUDRATE must be set after enabling. Add workaround
to the driver.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add configurable magic byte instead of fixed 0xAA. In some cases, it
is known that certain bytes are less likely in the transmission and
picking specific magic byte may reduce probability of failure of
detection of the correct amount of flushed data.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add support for DMM which manages cache and dedicated memory spaces.
Added support for data cache for buffers which are not DMM managed.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add include path to nordic/soc/nordic/common where some internal
headers for nordic devices are kept (e.g. dmm.h).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Sync the section of the custom.css dedicated to object
signatures with Godot custom CSS.
Fixes#80005.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Clean up if the mount command fails, such as due to a typo in the mount
point name, so that it can be retried.
Signed-off-by: Phil Hindman <phindman@xes-inc.com>
In a uniprocessor system, _sched_spinlock may not need to be
held in all the same cases that it does in a multiprocessor
system. Removing those unnecessary usages can lead to better
performance on UP systems. In the case of uncontested taking
and giving of a semaphore, this can be as much as a +14%
performance gain.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Inlining z_unpend_first_thread() has been observed to give a
+8% and +16% performance boost to the thread_metric benchmark's
message processing and synchronization tests respectively.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Re-orders the checks in should_preempt() tests so that the
z_is_thread_timeout_active() check is done last.
This change has been observed to give a +7% performance boost on
the thread_metric benchmark's preemptive scheduling test.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Silabs maintainer patterns did not match drivers that have the
vendor prefix before the driver name, e.g. gecko_burtc_timer.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The buffer pointer provided to the dynamic handler should be verified
after checking the transaction status. In case upload was aborted and
underlying connection closed, the callback will get
HTTP_SERVER_DATA_ABORTED status w/o a pointer to any data.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Due to the (potentially) hard to understand effects of blobs, it seems
prudent to make their presence more noticeable.
With this change, whenever blobs are present in the Zephyr work space,
the hello world sample output looks like this:
> *** Booting Zephyr OS build (tainted) v3.7.0-4569-gd4f8765ef20e ***
> Hello World! esp32c3_devkitm/esp32c3
Before, it looked like this:
> *** Booting Zephyr OS build v3.7.0-4568-g69c47471d187 ***
> Hello World! esp32c3_devkitm/esp32c3
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Due to the (potentially) hard to understand effects of blobs, it seems
prudent to make their presence more noticeable.
Hopefully, this will make it easier to identify issues (such as those
reported on GitHub) that have been observed on devices running a tainted
build.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
While not visible in the rendered documentation, double spaces look bad
when reading plaintext file.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This commit enables PMP on 64-bit SoCs from the SiFive Freedom SoC series
by default.
This change is needed to e.g. run the Userspace Hello World demo.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Change the callback context to the dev pointer instead of the data
pointer, as the dev pointer is needed by RTIO.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Added a new driver to support SPI communication via EUSART. Since the
Silabs EFR32MG24 family SoCs have only one USART, EUSART support is
necessary for implementing SPI functionality.
Signed-off-by: Teresa Zepeda Ventura <teresa.zvent@gmail.com>
- boards: renesas: Add support for agt.
- drivers: counter: Add support for counter driver use agt
- dts: arm: Add support for agt.
- dts: bindings: Add support for agt counter driver.
- soc: renesas: Add support for agt counter driver.
- samples: drivers: counter: alarm: Add support for RA8
This is initial support with only basic functionality for counter
operation on Zephyr using AGT hardware, current support for
count source is limited to LOCO and PCLKB, other count source
like underflow signal external pin or AGTIO from another AGT
channel will be added in later support
Signed-off-by: Ha Nguyen <ha.nguyen.fz@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
support the configurations which apply for LVDS pads
+ termination resistor
+ current reference control
+ rx current boost
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
Configures pins for the SPI instance attached to the Arduino connector
to enable using this board with the eval_adxl372_ardz shield.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Configures pins for the GPIOs attached to the Arduino connector to
enable using this board with the eval_adxl372_ardz shield.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Adds a new shield definition for the Analog Devices EVAL-ADXL372-ARDZ
accelerometer shield. This shield provides support for an ADI ADXL372
3-axis accelerometer over an Arduino SPI connector.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
IMXRT1062 bootrom reads boothdr initial vector table
from 0x60001000. In the CMAKE scatter linker scripts we put multiple
sections at offset 0x1000 in the rom. In linkers other than LD, we are
not guaranteed a particular order when placing these.
If we specify FIRST we can count on the .ivt coming first. The other
positions aren't as crucial.
From IMXRT1060RM.pdf 9.7.1
> The location of the IVT is the only fixed requirement by the ROM.
> The remainder or the image memory map is flexible and
> is determined by the contents of the IVT.
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
This commit increases the range of value for the
OPENTHREAD_CLI_MAX_LINE_LENGTH option to the maximum allowed.
The previous range may have been insufficient for Openthread vendor CLI
commands.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Use EXTRA_CONF_FILE in documentation .rst/.md files,
that replaced deprecated OVERLAY_CONFIG since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
.conf files added to enable INPUT_ESP32_TOUCH_SENSOR during sample build.
The absence of these files incorrectly prevented the input_dump sample
build from failing due to missing required hal files.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
The production version of the nRF54L15 SoC is now available, so remove
the initial Engineering A (EngA) preview version.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A bunch of copy-paste mistakes when adding the nRF54L15 DK added stale
references to the Preview DK (PDK).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
