Add heap size configuration and add new panel rk055hdmipi4ma0 for RT700.
It requires extra space for 720p panel.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
Add memory region definition for PSRAM space which is controlled
by XPSI2 in board dts for RT700. In this way user/developer
can place the data in the region in code more easily. This space
can be used by media domain masters like DCNano lcdif controller.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
It is better to let the FLEXSPI2 memory region in the final
linker file be generated from dts, in this way user/developer
can place the data in the region in code more easily.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
1. For the situation when the RAM space is limited and the driver's
frame buffer cannot be place in RAM, add a new property 'ext-ram' in the
binding, so if in device tree this property is assigned to a secondary
RAM space, place the frame buffer there. The old way is to define the
frame bufeer address in Kconfig, which may cause inconvenience if other
data also needs to be placed in the same RAM space.
2. Update the driver to support new requirement on RT700. The IP requires
a 64-byte alignment for the frame buffer stride.
3. Update the calculation of frame buffer size. If the pixel format is
updated, the frame buffer size shall be updated too.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
PINT connects GPIO pin to seperate IRQ slot. This info is
hidden in PINT driver, there is no way to know which IRQ
actually the GPIO pin is connected to.
Add new API to get which IRQ slot is connected to, based on
pin index.
Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
Disable rejoin by setting max_retry_attempts to 1. This is done to keep
the NWP state in sync with Zephyr Host, given that Zephyr does not have
a "rejoin ongoing" state.
Signed-off-by: Muzaffar Ahmed <muzaffar.ahmed@silabs.com>
Adding details regarding the Infineon driver refactoring to drop
cat1 from the driver names and binding files.
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Drop cat1 from the binding files to enable reuse by other
category devices as well.
Fixes#99174
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Since the w5500 is used in arduino shields it should use the current
code patterns since it will be examined as a reference for other
drivers. So, this is just trying to catch up to the changes that have
been made in the microchip, litex, and virtio drivers.
Use the net_eth_mac_load code pattern from those other drivers and
update a few things to the code guidelines as well.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
From the prior change b38a46bade adding
in the mac configuration in the device tree it is appropriate to
remove the local mac address bindings. This is done in this commit.
There is no intended functional change
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
There is an implementation of the System power management protocol in
the SCMI driver, so mention it.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix incorrect indentation that caused some elements to render as
defintion lists.
Added proper nesting of the various headings as everything was top-level
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Remove duplicated #include directives within the same
preprocessor scope across the Zephyr tree.
Duplicates inside different #ifdef branches are preserved
as they may be intentional.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Preserve the volatile qualifier when casting the shared memory pointer
in flash_cpu01_receive_cb() to avoid dropping volatile semantics during
inter-processor communication.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The driver gives us this information, so we just need to translate it to
Zephyr's type like we already do for security.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Remove test from tests/boards/nrf/i2s/i2s_divider.
The i2s_divider test was relying on debug log from I2S driver.
With the recent NRFX updates log was removed.
Better test, that counts rising edges on I2S_LRCLK line was added
in downstream (https://github.com/nrfconnect/sdk-nrf/pull/26230).
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
ext and loader aren't modified inside llext_get_section_header(),
they are just passed to llext_section_shndx(), where they're already
const. Make them const in this function too.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Fix a rare bug where some browsers seem to consider the welcome
admonition is overflowing.
This fixeszephyrproject-rtos/zephyr#101167.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Update the HW models module to:
0f0c43748111c65800c6920f1c0690676423a351
Including the following:
0f0c437 nrfx: Replace nrfx_gppi_domain_id_get() (requires new nrfx)
1bead00 nrf_ppi: Add support for NRF_PPI_ENDPOINT_IS_EVENT in simulation
9f11c2f NHW_misc: Add API to convert from/to simulated addr to real HW
ones
Note: This requires an nrfx 4.0.x which is newer than 2025/12/03,
i.e. modules/hal/nordic 0dbbf4794156ca09dc2d4bad8c42dcdb54acd662 or
newer which is has been used in Zephyr main since Zephyr's
242bf65d1d
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Added stlink_gdbserver as a runner for the nucleo_u0x boards.
Updated the boards' documentation to mention that JLink runners
do not work with the onboard debug probe and removed mention
of the unsupported openocd runner.
Signed-off-by: Martin Lampacher <martin.lampacher@gmail.com>
Add test suite for ARM MPU write-through cache functionality including:
- Cache coherency validation with dma ways
- Cache coherency validation
Support case on mimxrt1180_evk cm33/cm7 cores
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
- CONFIG_ARM_MPU_SRAM_WRITE_THROUGH: enables Write-Through cache policy
for SRAM regions instead of default Write-Back
Includes corresponding MPU attribute macros for ARMv7-M and ARMv8-M
architectures. Maintains backward compatibility with existing
configurations.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
Add Renesas EK-RA2A1 board support for these tests:
- tests/drivers/adc/adc_api
- tests/drivers/adc/adc_accuracy_test
Signed-off-by: Thinh Le Cong <thinh.le.xr@bp.renesas.com>
Add ADC device node to support ADC 16-bit on EK-RA2A1
Update other Renesas board nodes to include the "unit" property
Signed-off-by: Thinh Le Cong <thinh.le.xr@bp.renesas.com>
In current implementation, if the codec is not selected, the codec
CVSD will be used to as default value to start audio connection
procedure.
Optimize the codec selection to select the supported highest quality
codec as the default value.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Add feature support validation in `bt_hfp_ag_voice_recognition()` to
verify that both HF and AG support voice recognition feature before
attempting to activate/deactivate it.
This prevents attempting voice recognition operations when the feature
is not supported by either the Hands-Free device or the Audio Gateway,
returning -ENOTSUP in such cases.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Some macros defined for SDRAM timing configuration have typo.
This commit fixes the mistake and updates the macro used
in the code.
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
The GDB is not compiled by default and a recent change in the slot manager
series contained a typo in ifdef and missed by not compiling the GDB
support.
Fixes: ebb5625bee ("intel_adsp: Add debug slot manager")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
