With changes introduced in commit 6a3602a306
("net: buf: Clear `user_data` on allocation")
our memset() calls are redundant.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Pass a test failure reason text from harness to the instance
to convey more details on the failure.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Set missing TestCase statuses when a test under the BinaryHandler failed
(crashed), so remaining 'STARTED' and 'NONE' are now 'BLOCK' instead.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Core spec V5.4 Vol. 3 Part G 2.5.2.1 Robust Caching specifies
the conditions where Database Out Of Sync (0x12) error needs to
be returned as follows:
If a client that has indicated support for robust caching (by
setting the Robust Caching bit in the Client Supported Features
characteristic) is change-unaware then the server shall send an
ATT_ERROR_RSP PDU with the Error Code parameter set to Database
Out Of Sync (0x12) when either of the following happen:
• That client requests an operation at any Attribute Handle or
list of Attribute Handles by sending an ATT request.
• That client sends an ATT_READ_BY_TYPE_REQ PDU with Attribute
Type other than «Include» or «Characteristic» and an Attribute
Handle range other than 0x0001 to 0xFFFF.
Add the conditions to ATT_READ_BY_TYPE_REQ handler.
Signed-off-by: Chang Kim <changshik@meta.com>
When the CONFIG_BT_STM32WBA the stm32wba_fm flash driver is compiled
and must takes flash_stm32_sem_take/give functions from the
flash_stm32.h header file, like other stm32 series.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
* Add documentation about nRF9161 SoC variant
* Modify example apps to include both nRF9161 and nRF52840
* Switch from DFU to MCUmgr in example apps
Signed-off-by: Jan Kowalewski <jkowalewski@cthings.co>
The Bluetooth HCI USB transport layer implementation is provided by
"subsys/usb/device/class/bluetooth.c". The USB H4 Bluetooth function
implements a non-standard transport layer. There is no known host-side
equivalent that uses this protocol.
Note that the H4 protocol functionality is also provided by the
"subsys/usb/device/class/bluetooth.c".
Since that there are no real USB H4 Bluetooth users, remove the
implementation and sample without deprecation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
"west sign" uses the C preprocessor to generate a TOML configuration
file, needed for rimage. When creating LLEXTs rimage also uses a
configuration file where all supporting components are configured as
LLEXT. This adds such a file generation.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add two new flash extended operations for reading and writing STM32
option bytes from the application code.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Output a CMake error when the ITS store module is enabled but no
implementation ended up enabled (due to unfulfilled prerequisites).
This is to make it more clear than undefined references at link time.
Not a fatal error because CMake cannot fail for the twister filtering
to work on the tests.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Remove the hard restriction on CONFIG_SECURE_STORAGE_ITS_MAX_DATA_SIZE.
SETTINGS_MAX_VAL_LEN is in practice not used by any settings backend
implementation.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add a test scenario for the ITS store module implementation that uses
ZMS for storage.
Reorganize the others at the same time.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
It becomes the new default when the secure_storage_its_partition
devicetree chosen property is defined as it is a preferred alternative.
See the help message of the
`CONFIG_SECURE_STORAGE_ITS_STORE_IMPLEMENTATION_ZMS` Kconfig option
for more information.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves tests in the xsi_threads_ext
option group into a singular testsuite tests/posix/xsi_threads_ext
app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
Add Devicetree overlay for sample drivers/led/pwm and fix the one in
basic/blinky_pwm for nucleo_l4r5zi board to set appropriate to enable
pwdleds and set appropriate timer prescaler.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
In zephyr_hostapd_init, calls net_if_get_wifi_sap to get the SAP iface,
it means mgd iface of SAP type is registered before zephyr_hostapd_init.
Actually the mgd iface of SAP should be called in iface_api.init phase.
Therefore, remove unnecessary register of mgd iface in hostapd init.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Default enable WIFI_NM for both supplicant and embedded supplicant
case, to distinguish STA and SAP interface when use L2 layer.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
There are currently four types of roaming, 11r roaming, 11v roaming, 11k
roaming and legacy roaming, The priority of the roaming mode is
11r-->11v-->11k-->legacy roaming. If the ap does not support 11r/11v/11k
roaming, we will use legacy roaming. legecy roaming needs to do
full channel scan, which is the same as the general scan connection
process, so the legacy roaming time will be longer.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
These device driver APIs were merged after the DEVICE_API macro was
introduced.
Cleanup these leftover drivers.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Remove hard-coded clock values from device tree nodes,
instead read the clock values from the clock controller
during run time.
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
The clock controller/manager registers are updated with
the correct divider values by bootloader via hand-off
data, so now we can use the clock controller to get the
clock value of each peripheral during the run time.
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC is promptless so it cannot
be selected. Moreover it's also automatically enabled by
CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE in the same overlay file
so there would be no need to explicitly enable it.
As for the IMPORT, EXPORT, DERIVE they are needed for the TLS connection
to work properly. Previously it was working because at least IMPORT and
EXPORT are internally enabled by Mbed TLS at build time. So here we
are basically doing the same enablements with Kconfigs in clear.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_BASIC build symbols are automatically
enabled in Mbed TLS header files whenever any key pair feature between
IMPORT,EXPORT, GENERATE,DERIVE is set. So we mimic the same behavior with
Kconfig symbols:
- do not add BASIC to the automatic generated Kconfig file;
- let BASIC be auto-enabled as soon as any other feature (IMPORT,EXPORT,
GENERATE,DERIVE) is enabled for the same key type.
The 2nd point is achieved by adding a new Kconfig file which is meant
to hold the logic between PSA_WANT symbols. This is necessary because
Kconfig.psa is automatically generated.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The board hardware has no network interfaces, although the ECM/EEM class
implementation can provide Ethernet-like functionality and export it to
the host, this is no reason to default to a specific USB class
implementation.We do not make this kind of configuration for other
boards that have a USB device controller. Also, it may not be what a
user expects when using these boards with networking and a USB stack.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove all USB and CDC ACM configuration in favor of common
configuraiton.
Do not adapt board-specific configurations such as unknown PID/VID or
string descriptors. There is no justification for using them on specific
boards, and we do not have formal approval to use them in the project
tree. Also, we need more uniform configuration, since the main reason
for enabling CDC ACM here is to allow users to run examples like
hello_world right out of the box. Of course, anyone is free to customize
these settings in their fork or downstream project.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
