There is an unused variable, which may result in a compiler warning.
Since we can not guarantee the value of this variable
we can not test for it, so it is removed.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Add sample which clearly and thorougly shows how to use RTIO with
I2C controllers, both synchronously and async, comparing it with
the "standard" I2C API, in an controlled environment. Both the I2C
controller and I2C target are managed by the sample, using loopback
to monitor and control the I2C transfers.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
create rampstat Kconfig template to enable respective tmc drivers to
reuse the common configurations
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Convert vendor specific **_WIFI_BUILD_ONLY_MODE symbol as global
in order to provide common build flag to enable CI with no blobs.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Sleeping and suspended are now orthogonal states. That is, a thread
may be both sleeping and suspended and the two do not interact. One
repercussion of this is that suspending a thread will no longer
abort its timeout.
Threads are now created in the 'sleeping' state instead of a
'suspended' state. This dovetails nicely with the start delay that
can be given to a newly created thread--it is as though the very
first operation that a thread with a start delay is a sleep.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
At the present time, Zephyr does has overlap between sleeping and
suspending. Not only should sleeping and suspended be orthogonal
states, but we should ensure users always employ the correct API.
For example, to wake a sleeping thread, k_wakeup() should be used,
and to resume a suspended thread, k_thread_resume() should be used.
However, at the present time k_thread_resume() can be used on a
thread that called k_sleep(K_FOREVER). Sleeping should have nothing
to do with suspension.
This commit introduces the new _THREAD_SLEEPING thread state along
with some prep-work to facilitate the decoupling of the sleeping and
suspended thread states.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
ADS131M02 is Texas Instruments 2-channel, 24-Bit differential
input ADC which support wide range datarate.
Driver add support for adc read, channel configure, adc sampling
mode configuration and power management.
[1]. https://www.ti.com/lit/ds/symlink/ads131m02.pdf
Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
Shield was enabling some Kconfig options for no reason. Shields do
not need to enable driver classes unconditionally, these are enabled
either by drivers or samples that require them.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new option to control usage of DT nodelabel board_power. This
option also allows to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add options to control the behavior of sw0/sw1. These options also allow
to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new option to control the behavior of sw0. This option also allows
to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new option to control led0 behavior. If enabled, led0 will be used
for blinking. This option also allows to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new Kconfig option to control the behavior of sw0. If enabled, sw0
button will be used for provisioning. This option also allows to select
GPIO.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new Kconfig option to control the behavior of led0. This option
also allows to select GPIO only when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add additional test cases which verify that the HTTP server code can
handle PUT/PATCH/DELETE request types.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Extend the list of methods supported by dynamic resources with
PUT/PATCH/DELETE. The methods does not require any extra handling
from the server perspective, so the existing method handlers could be
reused.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
config->base is already defined as ADC_TypeDef so no there is no need to
cast it as such. Remove all occurrences throughout the file.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Now that clock source and sequencer are defined with strings in device
tree, move the old defines directly in the driver
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Now that st,adc-sequencer and st,adc_clock-source use a string, update the
ADC driver.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
fu drv adc update driver with string
In all STM32 dtsi and board dts, update the st,adc-sequencer and the
st,adc-clock-source properties so they are strings.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
fu dts: arm: st: use string instead of enum
STM32 sequencer property and clock source were defined using
arbitrary numbers. Use string instead.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Adds an ADC DMA test for Nucleo F103RB board now that support for it is
added in the ADC driver.
Reading multiple channels in F1 is only possible with the DMA, hence the
necessity to have a dedicated twister test for it.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
