With recent SDSC bundles, 54H fails the app core boot in case of a
unsupported GPIO in the UICR.
As Wi-Fi SR co-existence on nRF54H20DK is not yet supported, remove this
GPIO for 54H. This will be fixed properly once co-existence is
revisited.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add overlay to support test pwm_loopback on boards: ek_ra2a1,
ek_ra4e2, ek_ra4m2, ek_ra4m3, ek_ra4w1, ek_ra6e2, ek_ra6m1,
ek_ra6m2, ek_ra6m3, ek_ra6m4, ek_ra6m5, fpb_ra6e1, fpb_ra6e2.
Signed-off-by: Danh Doan <danh.doan.ue@bp.renesas.com>
using "dt_node_prop_enabled" to filter out supported platforms
1. check node existing.
2. check prop in node.
3. check the prop is True.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Change the workflow to pass instead of skip if the PR is mergeable,
just trying to see if it helps with PRs not appearing as mergeable
because they do not match status:success when they should.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Extend i2c_target_api test suite with the nrf5340 cpuapp, using the
new TWIS device driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add nrf twis (I2C controller supporting I2C peripheral role and
EasyDMA) support, including updating the existing twis dt binding
to match the hardware with proper examples.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
When using tickless mode, the socketpair()
seem to use heap by default on native_sim, so
add some space for it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This description provides information about setting up RCP (nRF21540-DK)
and OT HOST (mimxrt1020_evk) to communicate with HOST PC's echo_server
via OpenThread Border Router (OTBR).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This patch adds support for HOST OpenThread communication to the RCP
co-processor via UART using SPINEL protocol.
The aim is to use OpenThread's RCP (Radio Co-Processor) with HOST device
(for example imxRT1020). Such configuration is the same as one used
with PC program (ot-cli) and RCP.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This overlay configures the imxrt1020 EVK board to use its lpuart2 serial
port to communicate with other board (in this case nRF21540-DK), which
is the RCP for OpenThread protocol.
The nRF Zephyr RCP is the one from Nordic (v2.7.0):
west build -p always -b nrf21540dk/nrf52840 -S logging
nrf/samples/openthread/coprocessor
The same UART (on nRF) can be used for testing/debugging purposes with
using the ot-cli's SPINEL communication program:
sudo ./build/posix/src/posix/ot-cli 'spinel+hdlc+uart:///dev/ttyACM1?u
art-baudrate=1000000' --verbose
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This config allows setting up the echo_client program with
RCP HOST UART (via SPINEL protocol) communication.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Cmd_register uses a fixed channel as the rfcomm channel. Cmd_register
doesn't require parameters for channels.
Signed-off-by: Make Shi <make.shi@nxp.com>
Previously added type casting was still causing coverity to complain.
This time casting multiplication before bitshift operation.
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
Retreiving IP address from the networking interface assigned to
a PTP port could result in NULL dereference or undefined behaviour
when passing NULL to `memcpy()` function. Added check on addresses
returned from functions retreiving IP address from an interface.
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
Removed FLASH_BASE_ADDRESS configuration from various boards' Kconfig.
The only thing needed in order to do this was to update the relevant dtsi
files so that the flash0 node has its reg property configured properly.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
Implement the SPI context lock in the USART SPI driver for
EFM32/EFR32.
Remove incorrect -EBUSY error when spi_release() is called while
there are still bytes in the TX FIFO. This condition does not
cause the act of releasing the lock to fail.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The convention in this file is to align the struct members vertically. This
hasn't been properly followed for some of the more recent additions, so
let's fix it.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
This reverts commit 9d849d92bf that seems to
be causing dozens of basic kernel test failures across various platforms.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
STACK_CANARIES was enabling canaries in all functions using the compiler
flag -fstack-protector-all. This became confuse with the addition of the
options STRONG and EXPLICIT.
This commit adds the missing option (default level) and disambiguous the
options mapping them close to the compiler flags.
Now we have the following options:
STACK_CANARIES -> fstack-protector
STACK_CANARIES_STRONG -> fstack-protector-strong
STACK_CANARIES_ALL -> fstack-protector-all
STACK_CANARIES_EXPLICIT -> fstack-protector-explicit
Note that from now on STACK_CANARIES_ALL is the symbol that adds canaries
for all functions.
Signed-off-by: Flavio Ceolin <flavio.ceolin@gmail.com>
Add option to enable stack canaries only when explicitely
declared. It adds a new function attribute, __stack_protect, that
can be used to enable stack protection in a function.
Signed-off-by: Flavio Ceolin <flavio.ceolin@gmail.com>
Previously, when stack canaries were enabled, Zephyr applied this
protection to all functions. This commit introduces a new option that
allows stack canary protection to be applied selectively to specific
functions based on certain criteria.
Signed-off-by: Flavio Ceolin <flavio.ceolin@gmail.com>
- provide support for the STM32C071 serie
- add stm32g0-flash-controller compatible on flash node
to fix CI issue on undefined reference to
`flash_stm32_page_layout'
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
It introduces *-pinctrl.dtsi files for the C071XX
STM32 series, which will help to fix a CI problem
encountered.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Add the DWARF v5 sections to the linker scripts of
imx, imxrt, acp_6_0 and xtensa_sample_controller.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
This board has a built-in debug adapter that provides a serial
connection to the host. This is mentioned in the board documentation.
The SoC pins P0.15 (RX) and P0.19 (TX) are connected to the debug
adapter pins TXD and RXD, respectively. This board should not configure
any other serial connection by default.
Update the board documentation accordingly.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clarify how to configure serial output for the console for the two most
common cases. Follow up on commit 0cae816b27
("boards: add common configuration for CDC ACM UART")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Modify the board file when using gpio, input and pwm drivers dts
configuration example for it8801.
test: west build -p always -b it82xx2_evb tests/drivers/build_all/gpio
west build -p always -b it82xx2_evb tests/drivers/build_all/input
west build -p always -b it82xx2_evb tests/drivers/build_all/pwm
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Test "drivers.gpio.1pin.aw9523b" fails on stm32u083c_dk platform
because "arduino_i2c" definition does not exists in the device tree
of stm32u083c_dk board. Also updated the baord yaml
Signed-off-by: Arif Balik <arifbalik@outlook.com>
