When pytest is executed, it only writes logging messages to the twister
harness, and does not include information about any test assertion
failures. This information is printed to stdout, so simply write
the contents stdout to the harness log.
Remove the log file arguments previously passed to pytest, as these are
no longer needed.
Signed-off-by: Daniel DeGrasse <ddegrasse@tenstorrent.com>
The sample app draws rectangles in the corner of the display.
On devices with the SCREEN_INFO_X_ALIGNMENT_WIDTH capability,
each draw needs to transmit a complete line. Make the sample
work on such displays (e.g. the `ls0xx` driver) by making the
rectangles take up the full width of the display.
Co-authored-by: Benjamin Cabé <kartben@gmail.com>
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Fixes a multitude of Kconfigs that wrongly appear on devices
where support is literally impossible
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Introduce `UDC_STM32_CLOCK_CHECK` Kconfig option since
`USB_DC_STM32_CLOCK_CHECK` was intended for use with `usb_dc_stm32.c`,
which is mutually exclusive with `udc_stm32.c`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add a configuration option to skip the rx-queues for high priority packets
analogously to the tx-side.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
Add a Kconfig option which can be used to enable vendor HCI extensions for
Silicon Labs EFR32 devices.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
nRF70 can only choose a single security method due to limiting memory,
so, add individual tests to ensure build.
This is based on tests/net/wifi/configs test.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Updated list of partition tables generated using the following schemes:
- 'default' for most single core applications,
- 'amp' for the multi core applications using AMP.
The allocation rate for PROCPU and APPCPU usage is 3:1.
Added partitions for low-power (LP) cores to allow updates.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
In case channel_setup is called with a new attenuation
config, make sure previous calibration scheme is deleted properly.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Remove ADC2 support (identified as adc1 entry)
for additional ESP32-C3 based board targets.
Other boards have those instances already deleted.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This file defines some of the most important properties in the
devicetree, including core concepts like 'compatible', 'reg', and
'interrupts'. For some reason, we've never prioritized writing up
proper descriptions that indicate their importance or show where the
user can get more information about them in the specs or elsewhere.
Give this file a once-over to improve the situation.
Signed-off-by: Martí Bolívar <mbolivar@amperecomputing.com>
Signed-off-by: Martí Bolívar <marti.bolivar@oss.qualcomm.com>
Although it's quite unlikely that we will see shared memory
objects in practice that are greater than 2GiB, there is a
possibility of integer overflow when comparing intptr_t and
size_t, since the former is signed and the latter is unsigned.
Explicitly check to ensure that the addend is less than
INTPTR_MAX before subtraction.
This fixes CID 487734
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The nsem_list_unlock() static inline function looks as though it
was designed to always ignore the return value of
k_mutex_unlock(), presumably for performance reasons.
A quick audit of the code looks as though the call should
always succeed.
Prepend (void) to the call to avoid the coverity defect in the
future.
CID 444386
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
To avoid starvation of a traffic class by another, limit the maximum amount
of packets, that can sit in a single traffic-class-fifo to a fraction of
the maximum amount of available packets. In the tx-case also reserve
packets for direct sending, in the case, where
CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO is enabled.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
Without this patch the hdlc_iface_init() function assigns to
ot_hdlc_rcp_context structure pointer (*ctx) value of 0, as in the
NET_DEVICE_DT_INST_DEFINE() preprocessor macro the 'data' field is
set to NULL.
Afterwards, the ctx->iface is set to iface address passed to the function
(as well as the ctx->ot_context is set).
Writing those values to address 0x0 is catastrophic to for example
mimxrt1020, which uses ITCM memory (mapped from 0x0) to store flash
handling functions, as those are used to XIP code directly from
SPI NOR memory (as mximxrt1020 doesn't have internal flash).
In this particular case - the flash_flexspi_nor_erase() function is mapped
(i.e. relocated) to ITCM's 0x0 address. Overwriting first 8 bytes of it
causes the SoC to enter "Precise data bus error" exception.
The fix is to define the static instance of struct ot_hdlc_rcp_context
and pass its address to the NET_DEVICE_DT_INST_DEFINE() macro. As a result
its storage is now in RAM, not ITCM.
This issue has been discovered on UART based HDLC RCP communication, but as
it also may be problematic on the NXP driver, this patch fixes it too.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
To fix the native hardware chip select, we need to rewrite this driver
to not use the MCUX SDK handle abstraction, which does not fit the
zephyr use case.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add functions to get remaining length in the transfer. Refactor a bit to
avoid duplicate code for the for loop that is the same as in the total
length function.
The difference between the total length and left length function is that
the current buffer total length is counted in the former and the current
buffer remaining length is counted in the latter.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add properties for describing RX and TX fifo sizes.
Also reformat some descriptions and fix the description of the
transfer-delay property which was incorrect. Since zephyr spi bufs are
not continuous, every possible Zephyr LPSPI driver must use
continuous transfer mode, for which the meaning of this delay has
nothing to do with the chip select.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
There is no such thing as associating a compatible to a child binding
so remove this from the nxp,dmic binding definition and devicetree files
that incorrectly set one.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The GPIO peripheral on Silabs Series 2 devices is responsible for
allocating analog buses to analog peripherals. Enable support for
this in the pinctrl driver. Since these bus allocations are not
digital pins, introduce a new property silabs,analog-bus for this
purpose.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The event monitor did not handled IPv4 multicast address
addition or deletion information.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
To simplify debugging what event code is missing from the
events shell module, print also event id for the for unknown
events. This way it is a bit easier to figure out what the
unknown event is.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print Ethernet carrier on/off and VLAN tag enabled/disabled
status when monitoring events.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
