Escape the json input string given to `to_yaml()` function and the
content given to `yaml_set()` function.
This ensures that a string like `foo\bar` becomes `foo\\bar` during
internal CMake json processing and when written to the file it becomes
`foo\bar`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
On RISC-V, GCC and possibly other compilers include small globals in
special "small data" sections like .sbss and .sdata.
This allows accessing these globals using the global pointer register
and an offset, which is faster than ordinary relocations.
Currently, llext_load does not support multiple NOBIT sections.
Thus, llext's that use both .bss and .sbss sections cannot be relocated.
Also, the global pointer cannot be used in llext's, as it does not
change when calling into or returning from an llext, making the
optimization pointless for llext.
This commit disables the use of small data sections by adding the
appropriate compiler flag when compiling llext's.
In addition to solving the aforementioned issue, this fixes llext's
test_inspect on RISC-V.
Signed-off-by: Eric Ackermann <eric.ackermann@cispa.de>
Fix HCI command buffer allocation failure, that can cause
loss of Host Number of Completed Packets command.
Fail by rejecting the HCI Host Buffer Size command if the
required number of HCI command buffers are not allocated in
the Controller implementation.
When Controller to Host data flow control is supported in
the Controller only build, ensure that BT_BUF_CMD_TX_COUNT
is greater than or equal to (BT_BUF_RX_COUNT + Ncmd),
where Ncmd is supported maximum Num_HCI_Command_Packets in
the Controller implementation.
Relates to commit 81614307e9 ("Bluetooth: Add workaround
for no command buffer available")'.
Relates to commit 297f4f481f ("Bluetooth: Split HCI
command & event buffers to two pools").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove nested allocation of HCI command buffer so that one
less HCI command buffer is needed starting extended
advertising with privacy enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This resolves some addressed comments in this PR zephyrproject-rtos#77930
as well as this PR zephyrproject-rtos#80407
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Introduce a new directive for displaying hardware features supported by
a board, using information available in the devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
A file similar to vendor-prefixes.txt that provides a short description
of the top-level folders contained in dts/bindings
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Building with clang warns:
subsys/net/l2/ethernet/ethernet.c:178:18: error: unused function
'ethernet_check_ipv4_bcast_addr' [-Werror,-Wunused-function]
enum net_verdict ethernet_check_ipv4_bcast_addr(struct net_pkt *pkt,
^
ethernet_check_ipv4_bcast_addr is called by ethernet_ip_recv, which only
exists when CONFIG_NET_IPV4 or CONFIG_NET_IPV6 is defined.
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
The scd4x_channel_get function converts raw word values to
struct sensor_value's per the datasheet. The calculation for val2 of a
struct sensor_value `val->val2 = ((tmp_val % 0xFFFF) * 1000000) / 0xFFFF;`
can overflow the max of int32_t, resulting in an incorrect
sensor_value.
Fix it by changing the type of tmp_val to int64_t.
Signed-off-by: Zach Thomas <zach.thomas1.zt@gmail.com>
Enabling Dcache on RA8D1 will cause many issue with data coherence
in driver.
This commit disable Dcache for RA8D1 as temporary solution, user
can enable it but should be aware of data coherence issue
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
When DCACHE was enabled as default for ek_ra8d1, Flash HP
could not read or write. This PR aims to updates hal_renesas
revision to fix this issue.
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
These two sensors do not build with asserts enabled as they're
referencing a non-existent variable `pkt_size`.
Replaced for what (AFAIK) is the intended variable.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
PM, PM_DEVICE etc should be enabled by the application/samples, not the
board.
Add a config to default to custom policy for the board though since
there's one defined at soc level.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The harness was set to ztest, but the sample requires the console
harness to match on the "sample complete" line, its not actually
using ztest.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
This changes the board override to track the nodelabel rather than the
absolute node path, which happened to have changed in 0edc89c63b
breaking the test.
Verified with:
west build -p -b qemu_x86_tiny/atom tests/posix/common -T \
portability.posix.common.userspace
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
There are two bugs that caused regression for S32:
First there is a silicon errata specifically for the mask version on
this board that causes FIFO flush to not work as expected. The
workaround is to do a module reset before each transfer.
Second there was a division error for word size > 1 byte. The division
should be rounded up, not down, otherwise there will be an infinite
interrupt loop because the TX fifo will not be written to but the TDR
interrupt enabled causes interrupt when TX fifo is empty.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
These two fields were not being used and were a relic of some
intermediate implementation, and forgot to be removed.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The Kconfig description is wrong, this driver can be used with or
without RTIO. Also, rename the kconfig to be less confusing, as _NORMAL
is meaningless, this is the CPU/interrupt based driver.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Change the driver behavior so that if the provided RX buffer set is
bigger than the TX buffer, we will read all the RX buffer and fill the
TX with NOPs. The SPI driver API does not say to do this, and my
original interpretation of the API was that the TX length controls the
entire transfer length, but this behavior might fit better with some de
facto expectations of in tree consumers.
Also add some robustness to the calculation of how many extra bytes to fill
when tx should be nops.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This patch fixes transaction op items not performed within a single
SPI transfer. This is common for Write + Read commands, that depend on
the CS kept asserted until the end, otherwise the context will be lost.
A similar fix was applied to i2c_rtio_default on #79890.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Filtering on something we set in the prj..conf does not do anything. We
have filter on platforms already.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When building pre-located LLEXTs of ET_DYN type (shared ELF object)
on Xtensa, all the R_XTENSA_RELATIVE relocations are already correct,
the current code actually breaks them by mobing the value from the
target address-space to a storage range address. Simply removing the
recalculation solves the issue.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The ARP protocol handler cannot directly access the Ethernet header
because the caller has removed the header already when the handler
is called. So change net_arp_input() and pass source and destination
MAC address there instead of bogus pointer that was pointing to ARP
header instead of Ethernet header. This requires changes to ARP tests.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The logic for setting the src_inc and dst_inc would improperly set
these to zero when gatter/scatter was enabled but the respective
gatther_interval/scatter_interval was zero (which would imply
continuous operation).
Fixes: #85403
Signed-off-by: David Leach <david.leach@nxp.com>
Add back a reference to EOL'd LTS releases, in a structured way, just
the name, a link to the documentation and the EOL date.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
