Add more functionality in clock control driver.
Implement bootup clock initialization, async on and set_rate API.
Signed-off-by: Sunil Abraham <sunil.abraham@microchip.com>
Add more functionality in clock control driver.
Add bindings for dfll, fdpll, gclk generator, mclk cpu, osc32k, rtc clock
and xosc.
Signed-off-by: Sunil Abraham <sunil.abraham@microchip.com>
Drop usage of `pcfg` and `pdata` in favor of unified `cfg`
for common configuration and `port_cfg`, `port_data` for
port-specific configurations.
Signed-off-by: Sai Santhosh Malae <Santhosh.Malae@silabs.com>
Add the port_count field to the configuration structure
and allocate different sizes for the ports array based
on whether the node is HP or ULP.
Signed-off-by: Sai Santhosh Malae <Santhosh.Malae@silabs.com>
Initial support Flash-LP driver for Renesas RA
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Signed-off-by: Phi Tran <phi.tran.jg@bp.renesas.com>
Add reboot support in shell for FRDM-IMX91.
Compile commands:
west build -p always -b frdm_imx93/mimx9352/a55 \
samples/subsys/shell/shell_module
Signed-off-by: Hongbo Wang <hongbo.wang@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Enable TPM2 counter support on FRDM_IMX93 board.
Compile commands:
west build -p always -b frdm_imx93/mimx9352/a55 \
tests/drivers/counter/counter_basic_api/
Signed-off-by: Hongbo Wang <hongbo.wang@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Add i.MX 943 EVK support for counter_basic_api test application.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Update the yaml files of i.MX 943 CA55 for adding TPM counter
to the support list.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Add board support for EK_RA6M5, EK_RA6M4 i2c test use sci_i2c:
- tests/drivers/i2c/i2c_api
Example for i2c use sci_i2c:
west build -b ek_ra6m5 tests/drivers/i2c/i2c_api/ -p always \
-DDTC_OVERLAY_FILE=boards/ek_ra6m5_sci_i2c.overlay \
-DCONF_FILE="boards/ek_ra6m5_sci_i2c.conf"
Signed-off-by: Khai Cao <khai.cao.xh@renesas.com>
Enable support of i2c sci driver on these boards: ek_ra6m5,
ek_ra6m4
Signed-off-by: Khai Cao <khai.cao.xh@renesas.com>
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
logging.log_user test requires 3 free MPU regions, however MAX32657 only
has 2 free MPU regions available after boot. Skip this test on
MAX32657EVKIT since it does not meet this requirement.
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
If the other examples are not sufficient, put the problematic in the
angle of the impact of using two different components has on application,
which seems to me as a simple rule of thumb.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
CSI feaure switch to use static library.
A.Binary blob origin:
https://github.com/NXP/wifi_nb_fw/raw/nxp-v4.2.2/
B.Type of blob (precompiled library, firmware image):
Precompiled library
C.Zephyr module that the blob(s) will be referenced from:
wifi_nxp
D.Brief description of what the blob(s) do:
Implemented an algorithm for processing CSI information
E.What other components do the blob(s) depend on, if any?
Does not depend on any component
F.License the blob(s) are distributed under：
LA_OPT_NXP_Software_License
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Adding files to allow running the following tests for the Infineon
AutAnalog SAR ADC driver on the PSOC Edge family of MCUs:
* tests/drivers/adc/adc_api
* tests/drivers/adc/adc_error_cases
Signed-off-by: John Batch <john.batch@infineon.com>
Adding files to allow running the following samples for the Infineon
AutAnalog SAR ADC driver on the PSOC Edge family of MCUs:
* samples/drivers/adc_dt
* samples/drivers/adc_sequence
Signed-off-by: John Batch <john.batch@infineon.com>
Changes initialization to use a function from hal_infineon. This
initialization function will initialize the AutAnalog system if needed
as well as the SystemInit.
Signed-off-by: John Batch <john.batch@infineon.com>
*Adds AutAnalog related files to the cmakeu list and adding KConfig
definitions for AutAnalog and AutAnalog SAR ADC.
*Updates hal_infineon in west manifest.
*Updates infineon_kconfig.h to prevent multiple declarations of defines.
Signed-off-by: John Batch <john.batch@infineon.com>
*Separates AutAnalog and AutAnalog ADC in device tree.
*Makes AutAnalog SAR ADC a child of the AutAnalog system to reflect
hardware architecture.
*Adds binding file for AutAnalog SAR ADC driver.
Signed-off-by: John Batch <john.batch@infineon.com>
The product photo is from
https://learn.adafruit.com/assets/124731 and has the
license CC BY-SA 3.0.
Tested with the command in the index.rst file. Compile testing of
the overlay file is done via the samples/drivers/dac sample.
Signed-off-by: Jonas Berg <jonas.s.t.berg@gmail.com>
Add a new 'west bindesc extract' subcommand that dumps all binary
descriptors into a separate binary file. It will also report the range
(offset and length) of the dumped data within the original image.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This patch fixes an issue in the SPI driver that caused the chip select
line to remain low after a transaction completed (when using a GPIO and
operating in non-interrupt mode).
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Code was using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC value.
System can have non constant value for cycle counter when
this constant is not valid.
Now code calls sys_clock_hw_cycles_per_sec() that will expand
to CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC (as before) when needed.
It only impacts systems that can change hw cycles per second
at runtime (due to calibration or some other clock change).
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
This patch enable TPM on frdm_mxw71 and mimxrt1180_evk/cm33
This patch covers following test cases:
- test_all_channels
- test_multiple_alarms
- test_set_top_value_with_alarm
- test_single_shot_alarm_notop
- test_single_shot_alarm_top
- test_valid_function_without_alarm
- test_set_top_value_without_alarm
Signed-off-by: Felix Wang <fei.wang_3@nxp.com>
1.Include barrier.h to fix barrier_dsync_fence_full() not found issue
2.Support multiple channels for alarm function
Signed-off-by: Felix Wang <fei.wang_3@nxp.com>
