The previous setup packet reference will simply be overwritten when the
host omits data (OUT) stage. If a new setup packet arrives before the
previous data stage is complete, free the last setup packet buffer.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add new filters for Xtensa platforms:
* imxrt7xx supports now a hifi1 core
* imxrt6xx/imxrt7xx support now a hifi4 core
Kconfig* and CMakeList.txt files could be updated for Xtensa related
code so add them to the filters too.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Add support for the frame buffer address and stride alignment.
If user set the CONFIG_LV_DRAW_BUF_ALIGN to not be 4, the buffers
shall be allocated aoocrdingly.
If user set the CONFIG_LV_DRAW_BUF_STRIDE_ALIGN to not be 1, the
methods of flushing the display shall set the pitch accordingly.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
The mipi_dbi_nxp_dcnano_lcdif driver support non-contiguous frame
buffer, so when mipi_dbi_nxp_dcnano_lcdif cannot be used to send
the frame buffer data, the driver needs to check whether the data
is non-contiguous first. If it is then extra methods need to be
applied. First the data of each write must not exceed the line
width, second if each line's data exceeds the max payload, it also
needs to be sent seperately.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
display_rm67162 uses mipi_dsi API(s) to update transfer frame data, some
low level IP can while some cannot handle non-contiguous buffer(the frame
pitch is larger than frame width). In this case, pass the frame descriptor
as the user data in the message to the low level driver and let it
handle how many data to send. The display_rm67162 driver only need to
set the address correctly for each transfer according to the pitch/width.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
Add member in mipi_dsi_msg structure to store user data, incase the high
level driver or application needs to pass down extra configuration.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
Update CMakeLists.txt to conditionally include address translation
support based on Kconfig options.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add NXP-specific address translation table to support memory-mapped
translations between driver and device.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
There are SoCs that have different memory maps for device and driver.
Therefore the shared memory between them has different values and we
need to convert the addresses.
This commit introduces address translation support for OpenAMP:
- implements the address translation functions;
- returns the I/O operations used for address translation.
The ops can be used in Libmetal (see metal_io_init()).
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Make the stm32n6_dk variant (stm32n6570_dk/stm32n657xx/fsbl) unable
to execute tests in CI with Twister.
This change will help avoid many CI build failures caused by this variant.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Fixed typo whereby the description field started with `description: |`
instead of actual description.
Also added a proper title field while at it
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Enalbe II2C hal driver status polling timeout in order to avoid
blocking of some driver API, such as kernel hang during i2c scanning.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Add dt_compat_enabled_num Kconfig helper function for counting the number
of compatible nodes with status okay.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The siwx91x need a specific firmware image format. These image end with
.rps extension. The current name of the image is zephyr.bin.rps. However,
the .bin suffix is not relevant. It makes even more sense if we consider
the output of west sign: zephyr.signed.bin.rps. We can simplify these name
by remove the .bin suffix.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Once the keys has been provisioned on the Silabs siwx91x, the chip expects
the firmware to be properly signed.
This PR automate the signing process. Hence, "west flash" will work as
expected.
Co-developed-by: Aasim Shaik <aasim.shaik@silabs.com>
Signed-off-by: Aasim Shaik <aasim.shaik@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Silabs siwx91x support signed and encrypted firmwares. This PR includes
support for these features in "west sign"
Co-developed-by: Aasim Shaik <aasim.shaik@silabs.com>
Signed-off-by: Aasim Shaik <aasim.shaik@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Disable generation of .hex output, since the Commander runner
prefers it over the .bin output but SiWx91x needs a .bin.rps file.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Co-developed-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Use runners_yaml_props_target to set the name of the file to
flash, rather than hard-coding it for each board.
Co-developed-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Like other API in DNS cache, `dns_cache_remove` should check arguements
return -EINVAL if any of them is NULL.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
STM32H7 spi_loopback test fails since the introduction of a test enabling
SPI_HOLD_ON_CS.
This uncovered an issue where the SPI ISR is constantly called if the SPI
is not disabled, even if the interrupt enable register is completely
cleared.
A workaround is to disable the SPI IRQ at the NVIC level when
SPI_HOLD_ON_CS is used.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Enable parsed results to be printed to the console in addition
to being exported, rather than requiring one or the other.
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
If exporting to multiple formats (e.g., HTML and JSON), do not stop
after the first format when errors are found. Instead, continue
exporting to all specified formats and only exit afterwards.
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
