Add support for special GPIOTE0 instance on nrf54h20/cpurad.
This instance requires special handling because:
- there is no support for PORT event (level interrupts)
- TE channels are fixed to the pin
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add NRFX_GPIOTE_VAR_FEATURE_SUPPORT feature flag to nrfx configuration.
It enables support for special GPIOTE0 instance in nrfx_gpiote driver.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add new feature flags to gpiote node.
Include pinctrl. Pins used by GPIOTE0 on nrf54h20/cpurad require CTRLSEL
configuration. Pins are listed using pinctrl and parsed by nrf-regtool
to prepare UICR configuration.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Espressif's interrupt controller drive should not build for
ESP32C6 LP Core since it's behavior is different.
Add proper condition for that.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
The original implementation select the port
as best_port when stepsRemoved is equal to
the one of best_vector.
When challenger is from announce message
set in GPTP_PA_INFO_SUPERIOR_MASTER_PORT,
its stepsRemoved is the same as in the message.
When challenger is from master_priority
copied in GPTP_PA_INFO_UPDATE,
its stepsRemoved is [stepsRemoved of bestVector]+1.
Thus, we should add one to the challenger's
stepsRemoved in comparsion to avoid useless
update of bestVector.
Signed-off-by: Yusuke Omae <s1413091@gmail.com>
J-Link runner could be used to flash and debug.
Updated board document to add J-Link runner support, and also update
spsdk runner command to specify the runner by using "-r" parameter.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
More complex suspend and resume scheme might require exactly defined
location of this variable due to platform peculiar SW and HW requirement.
DTS zephyr,memory-region node with nodelabel `pm_s2ram` shall be used to
automatic definition of linker section for such objective.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add check for the RX data buffer size. It should be atleast 400 bytes,
anthing less than that scan fails.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
The default integration platform for all test cases is native_sim, but
there has never been a USB device controller available for native_sim
platform. Since legacy device support has been deprecated and all tests
and samples now use the usbd test feature tag, this test cannot be
performed on native_sim.
Remove bluetooth.shell.cdc_acm to resolve CI failures.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use DT_NODE_HAS_COMPAT_STATUS to skip disabled child nodes. This
avoids build errors when setting a RAM type to 0 banks.
Signed-off-by: Ofir Shemesh <ofirshemesh777@gmail.com>
Correct the boad YAML files for the ADI boards, using the correct RAM size
based on the selected RAM bank, not the total RAM present on the given SoC.
Signed-off-by: Pete Johanson <pete.johanson@analog.com>
TXD_DRIVE_EDGE setting will typically be set to BAUDR/4 for DDR mode,
but this may not cover all cases. Add a configurable multiplier and
divisor to apply to the BAUDR value so the value's relation to BAUDR can
be customized.
Signed-off-by: Daniel DeGrasse <ddegrasse@tenstorrent.com>
Add support the host I/O over eSPI peripheral channel for private
channel2 and channel3.
The default port number of ESPI_PERIPHERAL_HOST_IO_PVT2_PORT_NUM and
ESPI_PERIPHERAL_HOST_IO_PVT3_PORT_NUM are 0x68 and 0x70.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
When fs_stat() queries the root / mountpoint it should return its root
i_node but instead it tries to return the parent i_node which does not
exist. Fix this by checking if parent is set otherwise return the root
i_node.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/94000.
Signed-off-by: Bas van Loon <bas@arch-embedded.com>
The snippet for Zephyr as Xen Domain-0 was missing in the
Xen Platform section of MAINTAINERS.yml.
Add the missing entry to ensure that future pull requests
for this component are correctly tracked and assigned.
Signed-off-by: Dmytro Firsov <dmytro_firsov@epam.com>
Add support for configuring the maximum TX power for STA and AP modes using
a Device Tree property (`max-tx-power`). If unspecified, the default value
is set to 31 dBm.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Initial implementation of nRF54L quirks necessary for nRF54LM20A.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The test requires two UARTs: one for console output and one for device
management. Use UART1 for device management instead of CDC ACM because
the legacy stack is deprecated and it will take some time for MCUboot to
adapt.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add Kconfig option BOOT_SERIAL_UART, defined in the MCUboot module but
needed to be used in tests, to the UNDEF_KCONFIG_ALLOWLIST.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
