The convention in this file is to align the struct members vertically. This
hasn't been properly followed for some of the more recent additions, so
let's fix it.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
This reverts commit 9d849d92bf that seems to
be causing dozens of basic kernel test failures across various platforms.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
STACK_CANARIES was enabling canaries in all functions using the compiler
flag -fstack-protector-all. This became confuse with the addition of the
options STRONG and EXPLICIT.
This commit adds the missing option (default level) and disambiguous the
options mapping them close to the compiler flags.
Now we have the following options:
STACK_CANARIES -> fstack-protector
STACK_CANARIES_STRONG -> fstack-protector-strong
STACK_CANARIES_ALL -> fstack-protector-all
STACK_CANARIES_EXPLICIT -> fstack-protector-explicit
Note that from now on STACK_CANARIES_ALL is the symbol that adds canaries
for all functions.
Signed-off-by: Flavio Ceolin <flavio.ceolin@gmail.com>
Add option to enable stack canaries only when explicitely
declared. It adds a new function attribute, __stack_protect, that
can be used to enable stack protection in a function.
Signed-off-by: Flavio Ceolin <flavio.ceolin@gmail.com>
Previously, when stack canaries were enabled, Zephyr applied this
protection to all functions. This commit introduces a new option that
allows stack canary protection to be applied selectively to specific
functions based on certain criteria.
Signed-off-by: Flavio Ceolin <flavio.ceolin@gmail.com>
- provide support for the STM32C071 serie
- add stm32g0-flash-controller compatible on flash node
to fix CI issue on undefined reference to
`flash_stm32_page_layout'
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
It introduces *-pinctrl.dtsi files for the C071XX
STM32 series, which will help to fix a CI problem
encountered.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Add the DWARF v5 sections to the linker scripts of
imx, imxrt, acp_6_0 and xtensa_sample_controller.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
This board has a built-in debug adapter that provides a serial
connection to the host. This is mentioned in the board documentation.
The SoC pins P0.15 (RX) and P0.19 (TX) are connected to the debug
adapter pins TXD and RXD, respectively. This board should not configure
any other serial connection by default.
Update the board documentation accordingly.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clarify how to configure serial output for the console for the two most
common cases. Follow up on commit 0cae816b27
("boards: add common configuration for CDC ACM UART")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Modify the board file when using gpio, input and pwm drivers dts
configuration example for it8801.
test: west build -p always -b it82xx2_evb tests/drivers/build_all/gpio
west build -p always -b it82xx2_evb tests/drivers/build_all/input
west build -p always -b it82xx2_evb tests/drivers/build_all/pwm
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Test "drivers.gpio.1pin.aw9523b" fails on stm32u083c_dk platform
because "arduino_i2c" definition does not exists in the device tree
of stm32u083c_dk board. Also updated the baord yaml
Signed-off-by: Arif Balik <arifbalik@outlook.com>
Add support for the bt_hci_evt_le_cis_established_v2 event in
the host.
This provided additional information to the host and application
about the CIS paramters. Especially the peripheral gets new an
important information such as the SDU size and interval.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In Kconfig, already check both dpp and enterprise mode for enable
NO_CONFIG_BLOBS, so remove the wrong one in the cmakelist.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Start and stop SAP, the IPv4 address is not removed, if then use STA
mode to connect to EXT-AP with same gateway address as the stopped
SAP, STA will not get the DHCP IPv4 address, as the DHCP offer packet
is dropped due to detect of IPv4 address conflict. Removing SAP IPv4
address when stopped SAP can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
The Health Client model supports periodic publication and thus requires
the update callback to be initialized.
This commit implements a callback inside the health client model and
adds a wrapper to it so that the user can fill up the msg buffer.
This way, the Config Server will always accept
Config Model Publication Set message with periodic publication
parameters. If the users callback returns an error or is not
implemented, the periodic publication will be aborted.
Signed-off-by: Stine Åkredalen <stine.akredalen@nordicsemi.no>
apx needs to set compare b due to errata of XTAL glitch
ap4p needs to set minimum delta to 4
err026 requires XTAL to not be switched off/on when resetting
Signed-off-by: Richard Wheatley <richard.wheatley@ambiq.com>
Enhance the wait_queue benchmark to output resulting summary
metrics as records, so when it runs with Twister the results
are parsed and saved into twister.json and recording.csv files
for further analysis.
Minor documentation edits and make ClangFormat happy.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Enhance the sched_queue benchmark to output resulting summary
metrics as records, so when it runs with Twister the results
are parsed and saved into twister.json and recording.csv files
for further analysis.
Minor documentation edits and make ClangFormat happy.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Remove orphaned `k_mutex_unlock` in `eeprom_at25_read` as
the lock/unlock pair is handled in `eeprom_at2x_read` instead.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
To maintain consistency in `init_fn` parameter passing,
remove the address-of operator ('&') when assigning the `init_fn`
function pointer in the `DEVICE_DT_INST_DEFINE` macro.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add a compiler warning when building for an STM32 series MCU with PM
enabled but STM32_ENABLE_DEBUG_SLEEP_STOP=y. That option greatly
increases the power consumption during sleep, which is probably
undesirable when building with PM=y, and it can be activated silently
as a side effect of other options (namely RTT) making it tricky to find
out.
Add a warning to expose the situation.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The compiler requires that much of the C library be built without using LTO
so that various symbols are available for use by generated code, including
things like memset and memcpy.
Add -fno-lto when building both picolibc itself as well as the Zephyr
interface bits.
Closes: #81674
Signed-off-by: Keith Packard <keithp@keithp.com>
This adds data cache manipulations, flushing and invalidation,
to the tests where buffer content are being written and
compared. These tests map different virtual pages to the same
physical pages, and write to one of the mapped virtual
addresses. Some SoCs may cache the virtual address separately
and writes to one virtual address will not be reflected to
another virtual address, this failing the comparison. So we
need to manually flush the cache after writing to the buffer,
and invalidating cache before reading. Note that not all reads
and writes need this treatment as some of them only needs to
test for access permissions, and not the memory content.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For CPUs with incoherent cache under SMP, the tests to read/write
buffer (... majority of tests here) may not work correctly if
the test thread jumps between CPUs. So use the test infrastructure
to limit the test to 1 CPU.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The STM32F4 socs have different channels for the temperature sensor.
Some are at channel 16 and some at channel 18. Made changes wherever it
was relevant.
In short, the base configuration is to channel 16 and wherever it is
supposed to be 18 it is overridden.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
Added aliases to nucleo_l4r5zi/stm32f4_disco/stm32f411e_disco for
die_temp die_temp/vref/vbat nodes so that the die_temp_polling
and soc_voltage samples work for them.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
Remove the PS GPIO controller's static MMU region entry from the
mmu_regions table for both the XC7Zxxx and XC7ZxxxS variants of the
Zynq 7000.
The PS GPIO controller's device driver has been switched over to
using a named DEVICE_MMIO mapping.
Signed-off-by: Immo Birnbaum <mail@birnbaum.immo>
Set up a named device MMIO memory mapping in the GPIO controller's
parent device, map the virtual memory in the init function of the
parent device.
Once the controller's register space has been successfully mapped,
propagate the mapped virtual address to all child (= GPIO bank)
devices. While it is possible to add a named mapping to every
single GPIO bank device and initialize it in the respective bank
device's init function, this would result in multiple virtual
address mappings all pointing to the same 4k of physical memory.
I assume that, although all those mappings having the same attri-
butes, such a setup is at least discouraged.
Signed-off-by: Immo Birnbaum <mail@birnbaum.immo>
