Two functions have parameters in the wrong order in the function
description, fix them to the correct order
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The network log backend had the POSIX_C_LANG_SUPPORT_R
dependency added in a previous commit, but the dependency was
never added to the sample.
Add the dpeendency of LOG_BACKEND_NET to the
samples/net/syslog_net/prj.conf
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Do not set TC_PROVIDES_POSIX_C_LANG_SUPPORT_R as the default in
lib/posix/options/Kconfig.c_lang_r . TC_PROVIDES options are
only intended to be set by C libraries that implement parts of
the POSIX standard.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The return value of the system_off call is overwritten by the the call to
pm_s2ram_mark_check_and_clear. As arch_pm_s2ram_suspend needs to specify
why system_off failed, we need to make sure the rv of system_off is moved
to a safe register before calling pm_s2ram_mark_check_and_clear and moved
to r0 als rv of arch_pm_s2ram_suspend when the suspend call exits.
Signed-off-by: Hessel van der Molen <hvandermolen@dexels.com>
Using `west patch` with the `--patch-base`, `--patch-yaml` or
`--west-workspace` option results in an unhandled AttributeError in
filter_args() because the function expects these args to be of type
path. Adding the type to the argument definition forces argparse to
create variables of type path.
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
RFC6455 section 5.1 specifies that "A server MUST NOT mask any frames
that it sends to the client". Implement this for websocket write calls
via ZVFS, by storing in the websocket_context whether a socket is acting
in the client or server role, and using this to determine if sent data
should be masked.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
The non-raw API has been removed from the nRF 802.15.4 Radio Driver.
There is no need to set NRF_802154_USE_RAW_API macro anymore in
CMakeLists.txt that integrates the driver.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
This commit updates revision of hal_nordic to bring the latest changes
in the nRF IEEE 802.15.4 driver.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
When using this snippet with Zperf a boot warning is seen, fix the
warning by increasing the sockets.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add settings to get peak throughputs for nRF7002DK, this relies on the
overlay-wifi-nm-hostap.conf.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The Atmel counter driver requires a valid pinctrl list to initialize.
This relax this condition since the timer can be used as general purpose
timer, which may not require a pin associated with the timer unit.
Fixes#83509
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Adds a new error code that can be used to signify that a query was
valid but the response was not valid
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This sample works without increasing ZVFS_OPEN_MAX and ZVFS_POLL_MAX to
some arbitrary number. This also removes a duplicate entry for
ZVFS_OPEN_MAX.
ZVFS_OPEN_MAX already defaults to a reasonably large value of 16 if
POSIX_API is enabled, which is the case for the echo_service sample.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
Oddly, even though CI passed when the file_system_r change was
merged, now CI has encountered a build error because MIN() was
not defined.
Include `<zephyr/sys/util.h>` to pull in the definition.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
A copy-paste error propogated this typo to a few different
Kconfig files.
Correct 'informnation' to 'information'.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add the Sensor Fusion Low Power (SFLP) FIFO streaming capability,
using RTIO. The decode function is now aware of parsing following FIFO
tags:
- LSM6DSV16X_SFLP_GAME_ROTATION_VECTOR_TAG
- LSM6DSV16X_SFLP_GYROSCOPE_BIAS_TAG
- LSM6DSV16X_SFLP_GRAVITY_VECTOR_TAG
To activate SFLP the user should put in DT the proper configuration.
For example, to activate a 60Hz SFLP FIFO batching rate of game rotation
vector, gravity vector and gbias components, the user should add in DT
the following:
sflp-odr = <LSM6DSV16X_DT_SFLP_ODR_AT_60Hz>;
sflp-fifo-enable = <LSM6DSV16X_DT_SFLP_FIFO_GAME_ROTATION_GRAVITY_GBIAS>;
Signed-off-by: Armando Visconti <armando.visconti@st.com>
In case I3C IBI interrupt is not used do not skip reading the status
register, otherwise the interrupt event will not get cleared.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v2.8
Requires https://github.com/zephyrproject-rtos/hal_st/pull/24
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add three new channels and relative data:
- SENSOR_CHAN_GAME_ROTATION_VECTOR
The "game rotation vector" reports the four components x/y/z/w
(quaternions) of the unit vector representing a 3D spatial
rotation or orientation.
- SENSOR_CHAN_GRAVITY_VECTOR
The "gravity vector" reports the three axis x/y/z of the gravity
vector separated from the linear acceleration components.
The measurement unit is m/s^2.
- SENSOR_CHAN_GBIAS_XYZ
The "gbias" reports the gyroscope offset x/y/z components.
The measurement unit is radians/s.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Low power mode for non-asynchronous API case is only available when
RX is not used (RX pin is not defined). In that case TX starting
function was using uarte_enable_locked() which tracks if UARTE is
used by TX or RX and TXSTOPPED interrupt was disabling UARTE
unconditionally. Because of that following attempt to TX start
was assuming that UARTE is already enabled when it was disabled.
Fixing it by using uarte_disable_locked function in TXSTOPPED
handling.
Code reordering was required to make uarte_disable_locked()
available earlier.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The DHCPv4 options always assigns the DNS address if the router
provides one through the DHCP callback. There are times a developer
may not always want to assign the server from the router, but only
manually assign them. Adding a Kconfig option for assigning the DNS
address and defaulting to true to not interfere with previously
expected functionality.
Signed-off-by: Kris Wolff <kwolff@wavelynx.com>
Despite having higher log buffer sizes the log messages are being
dropped due to high rate (and longer messages) as hostap debugging is
very verbose, so, use "immediate" logging by default. As hostap is only
for control path this will not have impact on timing.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
As kernel heap is used for hostap, which replaced libc heap, then no
need to consider the MBEDTLS_ENABLE_HEAP case. For enterprise case,
mbedtls will use MBEDTLS_HEAP or libc heap to allocate memory, instead
of the kernel heap.
Modify the heap size for enterprise case to have necessary memory.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Latest supplicant uses 1K buffer size for sending control message via
socketpair, so reducing the NET_SOCKETPAIR_BUFFER_SIZE to save memory
footprint. There are 4 socketpairs for supplicant only case, and 6
socketpairs for hostapd case, update the heap size correspondingly.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Add the stm32f413h_disco target to the boards/st
Add the PLLi2S when needed by the USB or SDMMC or RNG.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The simple path and naming wasn't really right, there are no other tests
and the test suite has become quite automated and extensable to cover
most things we'd like to test with llext. Building, loading, and linking
of course.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Move the functionality of POSIX_FILE_SYSTEM_R to its own
compilation unit and remove the unnecessary dependency on
POSIX_FILE_SYSTEM.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The default stack size was causing qemu_arc/qemu_arc_em and
qemu_arc/qemu_arc_hs to fail when a dirent object was
stack-allocated.
Increase the default stack size to accomodate for additional
usage.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Previously, a NULL pointer was passed as the second argument to
readdir_r(). This is incorrect. The passed pointer should be
to a valid, externally-allocated struct direct.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The get_frame_count() API must return the number of frames in FIFO
for a given channel type, and not the total number of generic FIFO
frames. This API may be also re-used in the decoder routine when
the timestamp baseline is adjusted.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Address issue where the timing source is not stopped upon step completion
and not adjusting the actual position after performing a step.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Adds a fallback for the dual-edge-step property in the step dir common
code. Without this drivers using the common code would have to declare the
dual-edge-step property so it can default to false when not set, even if
the IC does not support adjusting it.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
BSIM tests that enabled CONFIG_BT_CTLR_TEST=y now require
-RealEncryption to pass the Controller's in-system unit test
of ECB module.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the NRF_ECB isr_ecb function to reduce redundant
common code.
Updated the unit tests to use Bluetooth Specification
defined test vectors.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
