A space-constrained device wouldn't enable this feature.
Fixes build errors since these tests constrain the size of
the IDT.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This has extra stack overhead, no need to impose this on the caller
unless it's needed to avoid doing a system call for every
character.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We add macros to define test cases that should be run with the CPU
in user mode, if the CPU supports it.
ztest_test_suite() declarations are now static as they can't go on
the main thread stack; the data gets shared between multiple threads.
It's better here anyway as a large test suite could fill up the main
stack, which is by default reduced to 512 bytes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
By default, threads are created only having access to their own thread
object and nothing else. This new flag to k_thread_create() gives the
thread access to all objects that the parent had at the time it was
created, with the exception of the parent thread itself.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This requires openocd version 0.10 or later.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@linaro.org>
- When flashing with dfu-util while alt is not a number, the name must
be quoted.
- Add missing commas in self.list_pattern
- Always call dfu-util with the VID/PID
Fixes: 257fa4af9 ("scripts: zephyr_flash_debug: flash like dfuutil.sh")
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
All commands need to have quotation marks stripped.
Fixes: bee6f9e73 ("scripts: zephyr_flash_debug: flash like openocd.sh")
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
This patch adds composite support for USB class drivers.
It acts as a relay between the usb_device stack and
class or function drivers.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add common device descriptor for USB class devices.
The common descriptor allows easy configuration of Manufacturer,
Product, SerialNumber strings and PID/VID.
It also allows future support for composite devices.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add Mass Storage Class header. The header is based on mass_storage.h,
has been cleaned up and extended by the Class and Protocol Codes.
mass_storage.h will be removed after mass_storage.c has been reworked.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
1. After calling sendto(), the packet will be unreferenced.
Call coap_pending_cycle() to make sure the packet is referenced until
we got the response from the peer or retransmission timeout.
2. In retransmit_request(), we rearrange the order to avoid the issue.
3. Remove IPv4 configuration for source code is expecting IPv6
4. Correct a typo in README.rst
5. Initialize the interface w/ IPv6 address
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
When testing against etsi_coaptest.sh, test cases TD_COAP_BLOCK_03/04
will get stuck. This is because these testcases send out a blockwise
transfer but with an empty payload. Although this should be a legit
request, large-update/create handlers did not check "MORE" flag in
block1 option and always return an error when request comes with empty
payload.
Corrected as below
1. Initialize coap_block_context when first block arrives.
(SIZE1 option is not always available. In the case that SIZE1 is
unavailable, the zoap_block_context will be re-initialized each time
a new block has arrived)
2. Check "MORE" flag of block1 option. If it's the last block, then
an empty payload should be allowed.
3. Response w/ 2.04 CHANGED when the last block has arrived for
large-update
4. Response w/ 2.02 CREATE when the last block has arrived for
large-create
5. Remove adding block2 option to the response since we are not sending
back any data to the caller
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Some chips are smart enough to handle the ACK request flag on
transmitted frames, so it's unneccessary for the L2 to wait for it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is both required in L2's radio part as well as it might be useful
on some ieee802154 radio drivers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Finally removing set_ieee_addr, set_short_addr and set_pan_id which have
been replaced by set_filter.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
set_ieee_addr, set_short_addr and set_pan_id are now unused by L2, so
removing their exposure through the radio API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These are now fully replaced by set_filter() thus removing their usage
by the L2 layer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the hw supports filtering, L2 will apply the ieee address, short
address or PAN ID filters.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will replace the current mandatory set_ieee_addr, set_short_addr
and set_pan_id functions, which are only valid if the hardware is
supporting filtering. Which is not the case on some chips.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using radio's get_capabilities, it is possible to know if the driver can
get CSMA work handed-over.
For now, up to device drivers to use
CONFIG_NET_L2_IEEE802154_RADIO_CSMA_CA_* parameters.
Let's see if it will be interesting at some point to enable runtime
modification of these parameters.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Further support will need work per-driver basis, as soon as the L2 will
be able to make usage of such support.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be useful to know various generic hardware aspects that can be
used relevantly by the L2 layer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that lqi and rssi are embedded into net_pkt, there is no need for
that function.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of having dedicated function on the radio api level for 15.4,
let's just add the relevant values to the net_pkt structure (if only
IEEE802154 is enabled). It's simpler and make the values relevantly
tied to the received packet.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixed a missing reset of FC feature on HCI reset. This
feature provided a simple connection handle based event
exclusions, but this is no longer needed with the
support for controller to host flow control. This feature
should be removed in the future.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for flashing targets compatible with esp32.sh.
Only tested by comparing commands that would be run.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Add support for flashing targets compatible with bossa-flash.sh.
This is something of a bug-for-bug reimplementation, as the existing
flashing script makes some potentially unsafe assumptions.
Only tested by comparing commands that would be run.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Add support for flashing targets compatible with pyocd.sh.
Tested on 96b_nitrogen, nrf52_blenano2, and frdm_k64f, with and
without PYOCD_BOARD_ID. Additionally, frdm_k64f was tested with
PYOCD_DAPARG_ARG='limit_packets=True'.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
