Replace NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME with the equivalent for
native_sim NATIVE_SIM_SLOWDOWN_TO_REAL_TIME.
native_sim accepted transitionally NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME
to ease porting from native_posix, but this option is being deprecated.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CONFIG_POSIX_C_LIB_EXT will get support for fnmatch() function.
The old CONFIG_FNMATCH is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Update Kconfig to not select BT_TICKER_REMAINDER_SUPPORT for nrf54L
Add BSim tests to cover using a ticker without BT_TICKER_REMAINDER_SUPPORT
and expire info enabled
Signed-off-by: Troels Nilsson <trnn@demant.com>
A few things were not flagged by CONFIG_BT_TICKER_REMAINDER_SUPPORT
that should have been; This caused building without it to fail
Initialize remainder to 0 where used with ticker_next_slot_get_ext(),
since it may not get set if remainder support is off
Signed-off-by: Troels Nilsson <trnn@demant.com>
Add low-power-write property to MSC device tree node, set
MSC_WRITECTRL_LPWRITE if enabled.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Introduce separate flash driver for Silabs Series 2. This driver
is forked from the Gecko flash driver with no changes outside of
formatting and naming.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
An option is added to allow vendor specific processing at
scmi_shmem_write_message() and scmi_shmem_read_message().
Additionally code has been added specific to NXP which has
some extended validation features.
Signed-off-by: Andre Heinemans <andre.heinemans@nxp.com>
When we receive piggybacked Ack, it means that we have
received all information for this request.
There is no need to track exchange lifetime anymore.
Once we reset the internal request, it is free to be used
for the application. So if we only have few requests allocated,
it would be slow to send those as get_free_request() only
gives request structures that don't have a lifetime left.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
CMSIS modules dsp and nn sets the optimization flag -Ofast for their
libraries. I've now made a new compiler property optimization_fast to
avoid using ifdefs in the cmsis CMakeLists.txt files.
I've update GCC and arcmwdt (not sure if arcmwdt supports -Ofast)
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
This patch will disable DMIC IRQ handling in DMIC driver
because it is now managed by Mic Privacy driver
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
As to facilitate work items preemption, common for sensor read ops.
e.g:
- Sensor read (submitted through workqueue).
- SPI read (submitted through workqueue using default handler).
This requires at least 2 thread pools to allow SPI read to complete,
to then come back and complete sensor reading.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
In `db_hash_setup()` the state object for MAC operations was initialized
using `psa_mac_operation_init()`. This function was not always optimized
or inlined.
A way to reduce stack usage is to use `memset()` and set the object to
0. This is one of the option documented to initialize
`psa_mac_operation_t` object.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
- Add possibility to choose implementation of OpenThread L2 and
set it to Zephyr's by default
- Remove unused `OPENTHREAD_SECURITY_INTERNAL` Kconfig
- Add missing choice names for logging and coprocessor
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
A PSA crypto operation object can be initialized in multiple
ways according to the documentation. For example,
1. Using a dedicated psa_xxx_operation_init() function that
returns an initialized object.
2. Using memset() to zero out the operation object.
For some PSA crypto driver implementations, using the first
method causes an excessive stack usage if the operation
object is large and psa_xxx_operation_init() is not inlined.
Instead, it is better to stick to memset() for this purpose.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Use the newly added timeout in various send functions from within
net_context_sendto.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
Allows to send with different timeouts to not block caller in some
situations. Stable API is kept and just calls `try`-variant with a timeout
of `K_FOREVER`.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
Use the recently added bt_le_get_local_features function as well
as bt_conn_get_remote_info to avoid using internal APIs to
check for PAST supported.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The connection object is, and should not, be modified by the function.
Making it const makes it possible to do this simple operation
in functions that also won't change the conn object (i.e.
that uses `const`).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The function supports reading multiple controller-based values.
It is effectively a copy of struct bt_dev_le but in a more
application-oriented definition.
It was chosen to keep the features as an array rather than a
64-bit value, as the comparison macros work on arrays and that
there already exists new bits > 64 in the core spec which is not
yet supported by Zephyr.
It is being smoke tested in a generic GATT client test,
as the individual values may depend on several Kconfig options.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adding board bbc_microbit_v2 overlay to pong example. This change
mainly enables to buzzer functionality of the example.
Signed-off-by: João Castilho <jpccastilho1999@gmail.com>
This commit updates the STM32 Ethernet binding to include
the `phy-connection-type` property as required.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Removed the Kconfig option `ETH_STM32_HAL_MII`.
PHY interface type should now be set using
the `phy-connection-type` property in the device tree.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
- Added macros `STM32_ETH_PHY_MODE` to determine
the PHY mode and speed from the `phy_connection_type`
property in the device tree.
- Updated the `eth0_data` structure to use `STM32_ETH_PHY_MODE`
for setting the media interface.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
This commit updates the device tree source files
for all STM32 boards to specify the PHY connection
type for the Ethernet configuration.
Added the `phy-connection-type` property
with the value "rmii" to the Ethernet node.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Streamline code in multiple places as follows:
- Remove redundant initialization of `ret` to `0`,
as it is immediately assigned a value.
- Add `len` to store the result of `strlen(argv[ARGV_CONF])` to avoid
multiple calls to `strlen` within the `for-loop` in `cmd_gpio_conf`.
- Merge separate `shell_print` calls by including a newline `\n`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This changes make PM state setting functions in SOC level weak so they
can be overridden by board/app level.
Signed-off-by: Tom Chang <CHChang19@nuvoton.com>
This adds the STEMMA-QT connector to the device tree. The connector
definition didn't exist when making the device tree originally.
Signed-off-by: Ian Wakely <raveious.irw@gmail.com>
This adds the STEMMA-QT connector to the device tree. The connector
definition didn't exist when making the device tree originally.
Signed-off-by: Ian Wakely <raveious.irw@gmail.com>
Use the first nodelabel rather than the node name when available for
shell completion as well as "gpio info". This label is always set gpio
nodes as that's what's used for references by device nodes, there may be
some case where a node has multiple labels for some reason but for a
human I reckon it still makes more sense to suggest a label rather than
the address.
This means that the commands would use, for example "gpioa" rather than
"gpio@58020000".
Fall back to the normal node name if there's no label set or if dt
metadata is not enabled.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Document this command's existence, provide basic usage, and describe
the locations of resources where additional help etc. should be found.
Signed-off-by: Martí Bolívar <marti.bolivar@oss.qualcomm.com>
This is an extension for indexing the source code in the workspace
with GNU Global. See the command line help for more information about
Global.
Signed-off-by: Martí Bolívar <marti.bolivar@oss.qualcomm.com>
