Behaviour is unchanged for max_skip == 0
For max_skip > 0, use a slightly different calculation to ensure
we can pass LL/DDI/ADV/BV-28-C
Signed-off-by: Troels Nilsson <trnn@demant.com>
Updated condition to enable NET_STATISTICS. Changed
CONFIG_NET_STATISTICS_ETHERNET to CONFIG_NET_STATISTICS_WIFI
in airoc_wifi.c
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Issue:
Kconfig WIFI_AIROC should not depend on infineon SOC family selection
for the connection. See issue#77012 for details.
Fix:
- update modules/hal_infineon/Kconfig to be able enable
USE_INFINEON_ABSTRACTION_RTOS for non Infineon SOC family.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Ignores "command disallowed" if the host privacy implementation tries
to change the device's random address while scanning or initiating.
This is not allowed by spec. It's caused by scan_update() in scan.c.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
CONFIG_SOC_COMPATIBLE_* is not configurable but CONFIG_BT_LLL_VENDOR_* is.
This allows an alternate LLL to be built on nordic and OpenISA chips.
Signed-off-by: Félix Piédallu <felix@piedallu.me>
With ACE2/3 the HDA DMA includes registers to read the Linear Link
Position.
Previous platforms (CAVS, ACE1) was able to report the LLP for GPDMA. Since
ACE2 all links are handled with HD-DMA, hence the new register has been
added for the firmware to report the LLP to the host.
Set the total_copied to 0 for older ACE1/CAVS platforms and in case of
host DMA on ACE2/3 since the informatiojn is not available.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Fixes: #77705
Fix wrong macro.
Tested with all the boards mentioned in that issue, build now works.
Signed-off-by: Sergio R. Caprile <scaprile@gmail.com>
The logs for retransmission attempts for sending segments and ack
retransmission attempts for receiving segments were the same, making it
difficult to distinguish between them. This can be solved by adding
information to the log of ack retransmission.
Signed-off-by: Junho Lee <tot0roprog@gmail.com>
Add the possibility to disable fault handling in spurious
interrupt handler on RISCs and replacce it with an infinite loop.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
[Reproduce issue]
1. Connect In-STA to Ex-AP
wifi connect WiFi_STA_HE_1.1.8 1234567890 3 2 2
2. Start APUT with ACS using below commands
wifi ap enable nxp-AP 161 1234567890 3
3. Connect Ex-STA to APUT and verify association using ping traffic
4. Now start two TCP server
zperf tcp download -I ml 5001 192.168.0.252
zperf tcp download -I up 6002 192.168.10.1
Observed behavior:
=============
Second TCP server fails to start
[Analysis]
1. After starting uap and a tcp server,
there is only one allocatable fd resource
left in the fdtable.
2. When two TCP clients try to establish a connection
with the server at the same time, the second client
cannot be assigned an fd, resulting in a failure.
[Fix]
Increase the maximum number of open file descriptors.
Signed-off-by: Qiankun Li <qiankun.li@nxp.com>
The change of alignment check in #76045 could be wrong and
isn't unnecessary to fix the stack traces output, undo it for
now.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Using strncasecmp to match HTTP headers can give unexpected results when
the strings to be compared match up until the end of one string, but the
other string contains additional characters. This can result in falsely
matching a HTTP header value, for example:
strncasecmp("Upgrade-Something", "Upgrade", sizeof("Upgrade") - 1) --> 0
In this case we know that both strings are NULL terminated since one is
a string literal and we have just length-checked and explicitly NULL
terminated the other. So we can just use strcasecmp without a max
length.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
The lwm2m_check_buf_sizes() function was not checking resources of
type LWM2M_RES_TYPE_U16, which could lead to potential overflows
when writing larger data types into U16 resources. Add a case for
LWM2M_RES_TYPE_U16 to properly validate the buffer size.
Fixes#77016
Signed-off-by: Hyunsu Yoon <piedroconti@naver.com>
If IPv6 is enabled, the fixed size net_buf data needs to be
large enough so that the full IPv6 header with extensions
can fit to one net_buf packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When an LLEXT object uses symbols of another such object, it depends
on it. Such dependencies have to be tracked to prevent their
accidental unloading. Ideally we should be able to track arbitrary
numbers of such dependencies, but this is a bit difficult. In this
first implementation we use a fixed-size array, currently consisting
of 8 entries.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
When deciding which sections to group together, only the low 3
section attribute bits are relevant, ignore the rest.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Using the immediate logging option from LLEXT modules requires
one more symbol export.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
LLEXT objects can also export symbols for use by other such objects.
That means, that when linking an LLEXT object we have to look for
unresolved symbols in previously loaded objects too.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Replace LL_EXTENSION_SYMBOL() with EXPORT_SYMBOL() in all tests and
samples.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Currently LLEXT has two ways to export symbols:
EXPORT_SYMBOL() to exort symbols from the main firmware to extensions
LL_EXTENSION_SYMBOL() to export symbols from extensions
but it is possible to write code, that needs to export symbols
regardless of whether it is built into the main image or an
extension. And in fact there's no real need in two distinct macros -
we can use one for both cases and recognise at build time which
direction exporting is happening. This patch extends EXPORT_SYMBOL()
to also work from extensions.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add a mode to build the driver without FW blobs, this is mainly for
twister to run and catch any build issues without depending on any FW
blobs.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The `bt_id_set_adv_own_addr` function itself tries to allocate a buffer
for the command and it failes due to lack of buffers, it returns error.
However, the `le_ext_adv_param_set` function doesn't handle the error
properly and keeps its own allocated buffer.
This commit releases the allocated buffer.
Partially fixes mesh in #77241.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add nrf5x binding header, as NRF5X_REG_MODE_DCDC is used in a macro
comparison. Missing header prevented evaluation to become true and so
enable DC/DC module.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Implemented new DIS characteristics:
- UDI for medical devices
- IEEE 11073-20601 Regulatory Certification Data List
- System ID
Also fixed buffer overflow bug when assigning too long DIS string literals
Signed-off-by: Simen Eilevstjønn <simen.eilevstjonn@laerdal.com>
Enable CYW20829_BT_FW_TX10DBM_POWER by default to get
best user experience experience out of the box.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Update CYW20829 Bluetooth LE fw for PAwR support
Commit#88d2529a3c5aee2e81947553bf6cbacb4671088c
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Problem:
on cyw208xx devices i see sometime `Timed out while synchronizing`
error in samples periodical_adv_rps/periodical_sync_rps.
log:
<err> bt_scan: Could not lookup connection handle from PAST
<err> bt_scan: Unknown handle 0x0000 for periodic advertising report
Timed out while synchronizing
...
After investigation i can confirm, the sync was created successful,
but in application (periodical_sync_rsp) terminated the sync when the
connection is not valid.
periodical_adv_rps doesn't have any mechanism to wait for sync and after
gatt write (subevent, response_slot information) it immediately
performs disconnection.
Solution:
Added sync wait delay before make disconnection, to ensure sync
is established before disconnection.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Added setup of PUBLIC ADDR
NOTE: By default, the CYW208xx controller sets some
hard-coded static address.
To avoid address duplication, let's always override
the default address by using the HCI command
BT_HCI_VND_OP_SET_LOCAL_DEV_ADDR. So
1. when cyw208xx_setup gets BT_ADDR_ANY from the host,
it will overwrite the default address, and the host
will switch to using a random address (set in the hci_init
function).
2. If user set the static address (by using bt_id_create)
before bt_enable, cyw208xx_setup will set user defined
static address.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Remove print "Failed to receive response...", if receive
BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_RX_FAILED.
Problem: with cyw920829m2evk_02 device periodic_adv_rsp returns
multiple messages “Failed to receive response….” in the terminal
log.
This happens because controller generates
HCI LE Periodic Advertising Response Report event for each
RspSlot. Because no RSP_DATA is observed in the OTA, which
is no scan device to transmit RSP_DATA, no RSP_DATA can be
received. Therefore, Data Status is 0xFF in all of these events,
which finally cause the messages “Failed to receive response….”
Data_Status = 0xFF is expected because nothing is received
for that Rsp Slot.
Per spec, it’s not mandatory to generate these events,
So another vendors (e.g. Nordic) might skip the HCI event
generation if Data_Status = 0xFF.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Select PAwR if enabled following features:
- BT_PER_ADV_RSP
- BT_PER_ADV_SYNC_RSP
Remove dependency BT_AIROC_CUSTOM for AIROC_CUSTOM_FIRMWARE_HCD_BLOB
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
