On some i.MX SoCs, such as i.MX95, the System Manager is running on a
Cortex-M core to manage the hardware resources and provide services for
SCMI requests.
So add the SCMI-based pinctrl driver to support these i.MX SoCs.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The MU init should be very early for some platforms. For examples,
i.MX95 is using MU for ARM SCMI. It should be initialzied early
for next power, pinctrl, clock etc. management.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Adds "chosen,uart-mcumgr" for nxp boards that support
the secondary bootloader partitioning.
Fixes the subsys\mgmt\mcumgr\smp_svr sample.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
GRTC needs to use direct clock source path instead of system clock path
to support ELV mode for nRF54L targets.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Add `DT_INST_NUM_IRQS()` to get the number of interrupt lines
of the current `DT_DRV_COMPAT`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
frmd_mcxc242 supports i2c, but it is not enabled.
Enable i2c and configure it to read accelerometer sensor on the board.
Update board documentation. Test it using sample.sensor.accel_polling.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
This PR updates all Espressif board names to meet its
original value. It also update reference links, re-organize
entries and removes unused content.
This also fixes bootloader information regarding a few boards.
IDF Bootloader was removed and these boards kept that info.
This updated it accordingly with the Simpleboot Bootloader.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
For some systems, the display peripheral or GPU requires that buffers be
aligned on a boundary for optimal performance. We already align display
buffers using CONFIG_LV_ATTRIBUTE_MEM_ALIGN_SIZE, but some applications
will rely on the definition of LV_ATTRIBUTE_MEM_ALIGN. Provide this
definition so those buffers will be aligned as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support the ccc deftgts. This also includes a function to check if
there is a secondary controller on the bus, and will transmit deftgts
after initialization or a hotjoin event.
This also adds dynamic_addr to the config_target in order to retrieve
the currently configured dynamic address to be used with deftgts.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Fixing the regression caused by 3949873886 ("Allow service to be
created with NULL host"). If the host parameter is null when creating
the HTTP service, the IPv6 socket is created by default. This can cause
issues if both IPv4 and IPv6 are enabled, like in HTTP server sample,
and the HTTP client connection is done by IPv4.
To fix this, we need to enable IPv4-to-IPv6 mapping in order to allow
IPv6 socket to serve a IPv4 connection. Allow also user to override this
if needed.
Fixes#78112
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The code was checking IPv4 address instead of IPv6.
Print also IPv6 address when rejoining the group.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This sets initial unpaged mappings for __ondemand_func code and
__ondemand_rodata variables. To achieve this, we have to augment the
backing store API.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This provides __ondemand_func and __ondemand_rodata tags for annotating
functions and read-only data that should be loaded on demand so not to
exhaust all available RAM. The demand paging mechanism will be leveraged
to load so designated code/data as needed and to evict it from memory
when unused.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Get console baudrate property from device tree to allow
proper configuration for 26 and 40 Mhz devices.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Adds a new DTS prop for i3c devices as support for the CCC SETAASA
requires prior knowledge of the target if it supports it according
to i3c spec v1.1.1 section 5.19.3.23.
This will be used as an optimization for bus initialization.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
This particular qemu platform seems to run into a strange TLB exception
with unclear cause. Disable the test suite on xtensa qemu for the time
being.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The custom linker script was required because SOF needed
some extra linker sections. Other than that, the custom linker
script was identical to the common architecture script. This
commit removes the custom linker script because:
* keeping the custom linker script in sync with the
common one is troublesome.
* application-specific linker sections shouldn't be
included in the generic soc linker script. Instead,
they should be handled at the application level
(i.e: via cmake commands if additional sections are
needed or via a new, custom linker script if more
changes are needed)
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
It appears some strangeness occurs around the consume semaphore today
that causes a TLB exception on qemu_xtensa_dc233. Unclear *why* just yet
but this fixes things in CI today.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Moves the telnet client into runners/core.py as well, as this is now shared
between openocd and jlink.
Signed-off-by: Tobias Pisani <mail@topisani.dev>
This was non-trivial, as openocd is a bit weird to work with. Using only
commands passed with '-c' arguments, I couldn't get it to reliably resume
(or just not halt) the target when started. I tried using the 'sleep'
command, and various 'configure -event XX { resume }' events, but nothing
panned out, as it seems to always halt after all `-c` commands have been
run.
To avoid that, this waits for the TCL RPC port to be up, and sends a
resume command there. This works reliably.
Signed-off-by: Tobias Pisani <mail@topisani.dev>
This command runs separately from a debug server, instead of attaching
to a running server. This is both the easiest out of the box experience,
and also should be possible to implement consistently for most runners.
This commit includes an initial implementation for pyocd.
Signed-off-by: Tobias Pisani <mail@topisani.dev>
This allows to run the test 'chan_blen_transfer' and 'loop_transfer' on
the sim3u1xx_dk board.
The functionality tested in `chan_link_transfer` and `scatter_gather` is
not (yet) supported by the Si32 DMA driver, and those tests therefore
not enabled.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This allows the users to know about the supported features and to run
(some of) the tests/drivers/dma tests on this board.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This supports the minimum of what is required to allow the AES hardware
to be used (memory to peripheral, peripheral to memory).
In addition, to pass some of the existing unit tests, it also supports
memory to memory operators.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Move the transfer process codes to work context becuase
it lock the mutex, move bus reset process codes too
because it calls some common udc apis (they may add
mutex lock in future).
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
This was seen in CI
START - test_cycle_ready_CC
Assertion failed at ...tests/net/conn_mgr_monitor/src/main.c:262:
cycle_ready_ifaces: (stats.conn_count_gen not equal to 1)
NET_EVENT_L4_CONNECTED should be fired when connectivity is gained.
FAIL - test_cycle_ready_CC in 0.015 seconds
As the event wait timeout is very short (1ms) by default, increase
it to 10ms so that we will not miss the event.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add condition for KConfig Renesas FSP hal module
Move the DUAL_BANK_MODE from SOC to flash driver KCONFIG
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Features enabled by this commit:
* RNG
* Ethernet port (shell sample works without changes)
Also fixed flash addresses in docs and added the default
mapping between inputs and GPIO pins.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Fix flexspi xip configuration issue regarding code relocation
due to the order of kconfig defaults being sourced
The flexspi setup was not being relocated to an on chip location
Also remove rt1060 conf file in flash common test which changes the
code relocation location to RAM, just keep as ITCM for all M7 which
as of now all have ITCM from NXP with flexspi.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Set a default value for constant-charge-voltage-max-microvolt, matching
the device hardware default, this ensure compatibility with existing
applications that did not specify the recently introduced property.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add and verify against reference descriptors a High-Speed only 192 kHz
24-bit stereo headphones with explicit feedback UAC2 instance.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Generate and test both Full-Speed and High-Speed descriptors against
reference values. Verify that IAD, interface and endpoint descriptors
are not shared between Full-Speed and High-Speed descriptor sets because
the number of non-UAC2 interfaces can be different at different speeds
and thus the assigned interface numbers and endpoint numbers can differ.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Generate full and high speed descriptors based on UAC2 instance
properties. Fail the build if an instance does not have speed properties
or if the instance with given speed property exceeds the bandwidth
available at the selected speed.
Remove obsolete no longer used macros to determine offsets inside
complete UAC2 descriptors blob. Only speed-specific descriptors arrays
are supported.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add full-speed property to build all configuration and to UAC2
descriptor tests because this is what the tests were written for
(UAC2 class originally was full-speed only and there were no speed
properties available).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The samples were written when UAC2 class supported only full-speed and
it was not clear how the high-speed would be supported.
Add the full-speed property so the samples can work with updated UAC2
implementation.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
