Fixes: #80193
With #62395 the Zephyr kernel and app version customization values were
moved to target properties to allow Zephyr modules to adjust the values.
This had the consequence described by #80193 that version customization
using CMake arguments, `-D`, or CMakeList.txt toplevel file can no
longer be used for customizing the version.
To support both CMake variable as well as Zephyr module version
customization use-cases then this commit uses `zephyr_get()` to fetch
any CMake variable adjustments and uses the value for default property
setting. This allows users to set customized version while still allow
Zephyr modules to overrule this as intended with #62395.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With the recent update to Sphinx RTD theme 3.0.0, a 19px-high element
that used to display the version number is not visible anymore, so the
JS code that hides the upper-left logo when scrolling down needs to be
adjusted to account for this change.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
If the direction of the last setup packet is not to the device but to
the host, then the transfer is not a status stage and should be queued.
This is not checked and prevents a zero length control IN transfer to
the host, e.g. used by the DFU class to indicate the end of the upload
process.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Reset control endpoint busy flags if configured and enabled, otherwise
it could mark the wrong buffer as busy after endpoint disable/enable.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Using strncpy gives this warning
warning: 'strncpy' output may be truncated copying 32 bytes from
a string of length 32 [-Wstringop-truncation]
strncpy(roaming_params.neighbor_rep.neighbor_ap[idx].bssid_info,
bssid_info,
sizeof(roaming_params.neighbor_rep.neighbor_ap->bssid_info));
There is '\0' at the end of the allocated buffer so we can safely
use memcpy() here to avoid any warnings.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure we are not able to overwrite string variables in sscanf
call. Allocate also one extra byte for null terminator character.
Fixes#80644
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Usage of K_SPINLOCK with CONFIG_DEBUG=y seems to trigger a compiler
warning about request not always being initialized. Fallback to
k_spin_lock/unlock calls to fix this issue.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Twister shall now verify that the user does not
use an obsolete Python version. If user's Python
is deemed too old, it will raise a relevant error.
This check will also happen when running Twister
via west.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This Kconfig has wrongly been added to defconfig files. It is not the
right place for it. It has never been the right place for it. Drivers
that need it should select the symbol in their Kconfig entries. Drop
PINCTL from Kconfig.defconfig and add proper select at Kconfig.sam*.
Fixes#78619
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
I recently found out, that the Ethernet support for the boards Nucleo
H563ZI and STM32H573I-DK is already available but it isn't mentioned
in the "Supported Features" section.
Signed-off-by: Philipp Steiner <philipp.steiner1987@gmail.com>
Not all the stm32H7 have a clock enable for their flash;
only the dual-core.
For the st,stm32h7-flash-controller with "clocks" property, the driver
will enable the flash clock bit in the corresponding RCC register.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Define the "clocks" property, for the flash "st,stm32h7-flash-controller"
node, only for the stm32H7 dual-core devices
which have the RCC bit 8 present in their RCC AHB3 register.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Because we might get answers in capital letters, convert the answer
to small case letters and also make sure we send query in small case
latters. This makes sure that our query_hash is properly calculated
regardless of how the resolver gets the data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allocate one extra pointer for the DNS server list so that
DNS resolving code can detect the end of the list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This Kconfig has wrongly been added to defconfig files. It is not the
right place for it. It has never been the right place for it. Drivers
that need it should select the symbol in their Kconfig entries. Drop
PINCTL from Kconfig.defconfig and add proper select at Kconfig.gd32.
Fixes#78619
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This change was in the same commit previously reverted and seem to be
unrelated and should not be reverted.
Fixes the problem:
..... /swap_helper.S:432:(.text.z_arm_svc+0x26):
relocation truncated to fit: R_ARM_THM_JUMP11 against symbol
`z_arm_int_exit' defined in .text._HandlerModeExit section in
....core/cortex_m/libarch__arm__core__cortex_m.a(exc_exit.c.obj)
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The struct jesd216_bfp was declared as __packed but later in the code
the address of a member was given to a non-packed pointer, potentially
causing reading of wrong addresses, and causing warnings with the
IAR ICCARM compiler.
After studying the JEDEC documentation JESD216F.02, section
6.4.2 JEDEC Basic Flash Parameter Header: 2nd DWORD, the struct must
be aligned to 4 so __packed is not necessary, just 4 byte alignment.
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
I for the life of me do not know what is going on here with the RNB chip
but it seems this override must be set in order for the chip to work,
regardless of strap-in configuration, and if not set explicitly, the
value after a reset for these two bits will be seemingly random and
inconsistent. And it was working before by luck before removing a second
redundant reset in a recent commit, because apparently the register
was getting the opposite of the reset value according to the datasheet
which makes it work. The result of these bits after reset seem to vary
depending on host mcu, board, debugger, number of times reset, type of
reset, and with a pinch of random chance after keeping all variables
seemingly the same, so let's just set it to the value that works
explicitly, even if it doesn't make sense. The bit here doesn't have
clear documentation but it seems it's for using RMII regardless of the
strap in option, which is what we want to do anyways if we know the
interface type from DT, so I think it's fine, considering it is making
this driver work again.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
500 ms reset time is only for software reset and comes from IEEE spec.
Datasheet mentions for hardware reset the assertion of the signal should
only need to be 500 us, and 100 us after deassert to wait to access
programming interface.
Also remove an unused macro.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
It is enabled by default if we enable device PM, but we do not want
this, otherwise we get linker errors (PM subsys, fun guaranteed!).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
When GPD is managed by pinctrl, pins retention needs to be controlled by
the driver to avoid glitches.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This patch allows to _safely_ configure GPIO ports that have their pad
on FAST_ACTIVE1 domain.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This patch introduces a new flag to indicate if a peripheral belongs
to FAST_ACTIVE1 domain. This way, pinctrl knows when to request the
SLOW_ACTIVE domain (where CTRLSEL multiplexer resides).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add the global power domain entry. This domain is not memory-mapped
but controlled using NRFS services.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The AT / STA wifi sample is generic so it does not need to be
located under espressif board directory. Following commit
will do additional changes to make the sample more generic.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move samples/net/wifi application to samples/net/wifi/shell
as it has been used as a shell application before.
Following commits will add new wifi samples to this directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
- fixes overlay-udp.conf build for platforms without TRNG.
- adds TEST_RANDOM_GENERATOR, as for most network samples.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
