Rework RAM disk driver to be configured using devicetree and
support multiple instances.
This patch also removes a copy of the RAM disk driver,
tests/subsys/fs/fat_fs_dual_drive/src/disk_access_test_drv.c,
that was there for testing multiple disk drivers support.
Bonus: one SYS_INIT() less and a memory region can be exported to the
host.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
If the network interface naming is enabled, then use the
interface name length (CONFIG_NET_INTERFACE_NAME_LEN) for
IFNAMSIZ instead of device name length.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add input codes to the gpio-keys devices, this makes the board build
correctly with the input samples, that are currently failing to build in
CI.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Added an exception to scl.py module, to not process an empty
yaml file, because of error from pykwalify. New exception
is handled when processing quarantine files, to allow
an empty file.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This commit removes const declarations for members
inside structures used for chat scripts to allow for
modifying them at runtime.
Macros like MODEM_CHAT_SCRIPT_DEFINE() cover the
whole struct when declaring them const, ensuring
they remain placed in ROM.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit optimizes the performance of the script chats by
storing the size of requests with the chat script chat, negating
the need to use strlen() within the modem_chat module every time
a chat script chat request is sent.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit updates the modem_cellular driver to use the
new naming scheme for the modem_chat functions.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit adds one new feature, modem_chat_run_script(),
which synchronously runs a script.
The existing function modem_chat_script_run() is async,
and doesn't follow the naming convention created for the
other modem modules, specifically, all functions are sync,
unless appended with _async.
To preserve backwards compatibility, the existing function
modem_chat_script_run() will remain until deprecated. It
simply calls modem_chat_run_script_async().
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Included kconfigs to set the ISO-AL logging level and control debug
logging verbosity in ISO-AL unit tests.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Updated unit tests to match changes in ISO-AL that disregard the length
of a received PDU with errors.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Intent is to pass Ellisys ISOAL quality tests for framed TX scenarios
where the TX SDU includes a time stamp that is not based on the
controller's clock.
Changes:
-- Include controller's reception time as a separate field in the TX SDU
information
-- Include decision on whether SDU time stamp is valid and based on the
controller's clock
-- Arbitrate and select / compute time stamp for the SDU
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Changes:
-- Changed RX tests and one TX test to cover endianness of the framed
segment header fields
-- Updated RX debug PDU print to include framed segment details
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Changes:
-- Corrected reading and writing time offset in framed segment header to
account for endianness
-- Corrected bit positioning of time offset bit field in the segment
header structure definition
-- Fixed upstream Zephyr BSIM test build failure due to debug logging
39-bit variable
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Changes:
-- Included a test to check TX in concesecutive events irrespective of
the input target event
-- Updated expected output of current tests for change in framed RX
error handling which waiting for the start of an event
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Changes:
-- Disregards target event after segmenting the first TX SDU and instead
decide event based on the next payload and feasibility to fragment
for that event (time-offset > 0)
-- Corrected error SDU release logic when an error occurs while
expecting the start of a new SDU, to avoid releasing an SDU which
could be received in the next payload or event
-- Included additional debug logging
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Adjust test sleep durations to compensate towards timing
changes in Zephyr Controller radio scheduling.
With the change in the radio scheduling, there is overlap
of advertising PDU from multiple nodes that relay the PDU,
hence increase test timeout so that next advertising
interval that uses random delay will get received by nodes
without collisions on air.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Revert back the EVENT_OVERHEAD_END_US value to original
value in initial commit 5c3709c13f ("bluetooth:
controller: Add def's re. update to slot reservation calc").
40 us is a sufficient margin considering ~30 us being the
worst case Rx chain delay for S8 Coded PHY on nRF5x SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After the handler.py module has been split up more,
we can update the relevant tests.
100% coverage achieved.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Simple refactoring aiming to reduce the average method length.
Minor corrections of the handlers module, removing wholly unused
variables, etc.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Expansion of the tests related to handlers.py
Achieves over 85% coverage.
Implemented most of golowanow's suggestions.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
So that the HAL's system init function configures the reset GPIO as
nRESET if requested by the user.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Rather than yielding to idle thread, keep the part awake.
So debugger can still access it,
since some SOCs cannot be debugged in low power states.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
This adds a link for convenience. Many times before I struggled to
find the date for the next feature freeze. This is to help others,
and myself, to find it easier in the future.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
Document how to use pytest_root keyword. Update docs
with changes in pytest-twister-harness plugin.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Allow to specify a list of pytest directories, files or subtests
with pytest_root keyword in test yaml.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This adds support for the Upload OOB Start message to the DFD server, by
providing callbacks that the application can use to hook any OOB scheme
into the model behavior.
There are also extensive changes to the dfu_slot module, to accomodate
the new needs that appeared with the support for OOB transfer (mainly,
fwid, size and metadata are no longer available when the slot is
allocated, they appear later in the handling).
Signed-off-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
All WiFi channel numbers fit within a 8 bit number, as the maximum
allocated channel is 233. This halves the memory requirement.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This driver only supports a single instance. This commit cleans up the
device definition and indicates this.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Assert the source clock is defined in the device tree to ensure the
reference is valid.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
