Add qemu_leon3 target to the tests that list below. These set
CONFIG_MULTITHREADING=n.
- tests/kernel/mem_heap/mheap_api_concept
- tests/kernel/mem_slab/mslab_api
- tests/kernel/threads/no-multithreading
- tests/kernel/timer/timer_api
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
The pre-alloacted size of the buffer for the SHA ROM API code increases
in npcx4 chip. This commit adds a new property context-buffer-size to
sha0 DT node in npcx9 and npcx4 separately. The driver can pre-allocate
buffer with the correct size based on the property.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Since frdm_k64f is used as example in mcumgr sample with serial transport,
make it ready for compilation.
Fixes#63520
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
The check for number of streams in a subgroup was reversed, so
it would never allow for correct values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Currently context->local is not set for offloaded interface.
This change move net_offload_bind call after set of context->local.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Fixes an issue that reload mode is not disabled in case of an error.
From this case the driver could not recover because in msg_init()
no new transfer could be initialized.
Signed-off-by: Mario Jaun <mario.jaun@gmail.com>
Since 2f003e59 reworked the structure of k_mem_slab information fields,
we need to update the logging statements in the i2s_mcux_sai driver to
access these fields correctly.
Fixes#63527
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
By requiring a full-on YAML fragment, the Domains class can rely on
pykwalify to do the heavy lifting with validating types and structure.
Remove support for loading domains from a dictionary, so that we don't
ever have to replicate the same checks on the input, and we can instead
have a single entry point.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Do extra checks to reject inconsistent `domains.yaml` contents early:
default: app
build_dir: /path/to/build
domains:
- name: image_1
build_dir: /path/to/build/image_1
- name: image_2
build_dir: /path/to/build/image_2
flash_order:
- image_1
- image_2
- unknown
This example lists "image_1" and "image_2" as known domains, but an
entry for the default "app" is missing, which should never be allowed.
A valid `domains.yaml` file shall also not contain extra domains under
`flash_order`, such as "unknown", which doesn't appear under `domains`.
Either of these cases can now be caught while initializing an instance
of the Domains class.
It follows that a valid `domains.yaml` file must always contain a list
of domains with at least one entry - the default image. Since `default`
is a required key in the YAML schema, `domains` should be required too.
Thus, empty lists will be rejected by pykwalify, so the questionable
warning for "no domains defined; this probably won't work" can be axed.
Fixes#63166
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Few channels of this driver were using the wrong units, add a note
pointing out that this needs a matching change in any application using
them.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a migration note entry about CONTAINER_OF type checking for the
k_work use case. This was common enough that it's probably worth a note
pointing at the conversion function.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Different nRF52 devices have different maximum TWI DMA transfer size,
and it's easy to hit the limit with i2c displays on nrf52832 (8 bit) and
nrf52810 (10 bit). Currently neither the driver or the hal validate the
limit, leading to random NACK errors when trying to transfer more data.
Add a check on the driver to fail gracefully when going over the limit.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
These two have been converted from kscan to input already, move the
bindings over to match the change.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Minor updates both to make it more consistent with the
nrf53bsim documentation, and include more links
and a small section about the C library choice.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the documentation describing the bsim boards overall
to match the current reality.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add documentation for the newly introduced nrf5340bsim boards.
And rename the nrf52bsim documentation file as it is not the only
one anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Minor updates as now we have also native_sim, so we
should not only refer to native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
"Numbered steps" were dropped a long time ago in a previous revamp of
the stylesheet, so dropping instructions related to them in the
documentation guidelines.
Also remove unecessary mention to "how to build the doc" as it's
already mentioned as a note at the top of the document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
There used to be a dedicated style to number headings in a .rst document
but there is currently no actual stylesheet for it, and the added value
is somewhat limited: dropping the associated directive from the GSG.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Reword the descriptions for the bus-speed, sample-point, bus-speed-data,
and sample-point-data CAN controller devicetree properties.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Added fail on pairing_failed callback for both central and peripheral.
Added pairing status checks in peripheral.
It has been done to test the case when multi-role BT device tried to
pair without bonding (peripheral role) while already previously bonded
with the same device on another Bluetooth identity as it seems that
there was an issue with it previously.
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
Added run-time BT_CENTRAL role check for the path that was
central specific and did not have such check.
When multi-role BT device tried to pair without bonding (peripheral role)
while already previously bonded with the same device on another
Bluetooth identity, pairing failed.
It executed central-specific code, which should not be executed in case
when the device acts as peripheral (as it is even opt-out from code when
CONFIG_BT_CENTRAL is not enabled).
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
In ll_setup_iso_path cis is only ever set if CONFIG_BT_CTLR_CONN_ISO
is enabled, and similarly adv_stream is only ever set if
CONFIG_BT_CTLR_ADV_ISO is enabled.
The two assignments were reported as dead code by Coverity due
to this, which has been fixed by guarding the code with
the respective Kconfigs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Clean up testcase definition for voltage test, by moving the
LPCXpresso55s36 board overlay file into the boards/ folder of the test,
as well as adding a fixture to the testcase so that it will only be
executed on properly configured boards.
Fixes#62884
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This reverts commit 8084ea55b7.
The rootcause is fixed in the ARC QEMU which is in SDK 0.16.3.
As we've updated SDK in upstream CI we can revert this
workaround.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
BT_SECURITY_FORCE_PAIR option gets overridden when CONFIG_BT_SMP_SC_ONLY
or CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY is defined. Cache the bit value
before overrides.
Add explicit forced pair handling to existing security level check.
Functionality did not change as this was done implicitly due to integer
comparison for enums.
Add extra clarification to the method doc.
Signed-off-by: Rait Rääk <raitraak@gmail.com>
When using a quarantine file with more than 512 unique
entries, than time of matching quarantine increases
significantly. This is because regexp cache size is
512. Add precompiled regexp entries to the quarantine
as a fix.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Properly document structs and convert some @defgroups to @name'd
headings that are more appropriate.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Define all the register offset directly in the driver according
to the RISCV PLIC specification as they are not configurable,
see: https://github.com/riscv/riscv-plic-spec.
Updated devicetrees that has PLIC accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Removing the edge-trigger Kconfig as it is supported by default
in the RISCV PLIC specifications.
Define the edge-trigger register offset in the driver instead
of retrieving the value from devicetree as it is not something
configurable. The value 0x1080 is defined in Andes & Telink
datasheets.
Updated build_all testcase.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Only confirmable messages need pending tracking. Non-confirmable
messages are released after sending.
Match incoming packets with token, not message ID.
Ignore responses with non-matching tokens.
Remove unused function send_reset().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
In case observation token changes (the LwM2M server re-sends
observation request to the client), the LwM2M engine should cancel any
ongoing notifications based on the old token. Otherwise, it will be
impossible to match the pending notification reply (ACK) with the
observer context anymore, causing new notifications for this
observation to stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes#62677 where printf defaults to using armclang's semihosting backed
implementation of printf.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Remove the terminate_ack from struct ll_conn since it is
not used anywhere, and results in dead code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The remaining bit should be zero if auth is
shorter than PROV_AUTH_MAX_LEN and it should
be trimmed by removing octets with indexes
higher than PROV_AUTH_MAX_LEN.
Signed-off-by: Alperen Şener <alperen.sener@nordicsemi.no>
Added SOC_GECKO_HAS_RADIO symbol, to indicate that a SoC has a radio
phy, so that radio related code would only apply to devices with radio.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
