When both the memory base address & its size are zero, the
assertions test will be comparing an unsigned int against zero
which result in compilation warning, and will be raised to
error in Twister
Fix them with more conditional compilations.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Fix build for IMXRT11xx SOCs. The ARM MPU header was missing for the CM4
board overlays, add the required header so the sample can build.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Locate common mpu code together with other arm / nxp mpu code in the
arch folder where it logically belongs.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The pca9685 driver assumes the chip will be in "restart" mode
after putting it to sleep. This is not necessarily the case, which
can cause setting the prescaler to fail.
This fix allows the precaler to always be set and only restart the pwm's
when the chip was actually in restart mode after being put to sleep.
Signed-off-by: Jaap Versteegh <j.r.versteegh@gmail.com>
Fix MCUBoot error for LPC55S69 "slots are not compatible".
Use the standard slot naming,
used by TFM-enabled Zephyr platforms.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Added chat script and initial config to support Telit ME910G1.
Needed to edit power_pulse pin timing in accordance to datasheet.
Signed-off-by: Jeff Welder <Jeff.Welder@ellenbytech.com>
This is a partial revert of one-line from commit 06cfbd4159 ("drivers:
power_domain: Introduce a gpio monitor driver") which not just
introduced a new driver (no problem with that) but also changed the
initialization priority of another, unrelated and existing power domain
driver without even trying to compile it:
https://github.com/zephyrproject-rtos/zephyr/pull/61166#issuecomment-1780959157
```
west config manifest.project-filter -- +sof
west update
west build -b intel_adsp_ace20_lnl modules/audio/sof/app/
ERROR: /soc/ssp@28100 POST_KERNEL 43 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@29100 POST_KERNEL 44 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2a100 POST_KERNEL 45 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2b100 POST_KERNEL 46 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2c100 POST_KERNEL 47 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2d100 POST_KERNEL 48 < /soc/dfpmccu@71b00/io0_domain 51
```
Also note a reviewer (@ceolin) expressed concerns about this unrelated
change but it was ignored:
https://github.com/zephyrproject-rtos/zephyr/pull/61166#discussion_r1357908984
Using `CONFIG_KERNEL_INIT_PRIORITY_DEFAULT` here may be "bad" for some
reason(s) and maybe it should be changed in the future, but it's nothing
compared to breaking _compilation_ of code that has been validated for
months and been released in production
(https://github.com/thesofproject/sof-bin/releases/tag/v2023.09)
So the very urgent thing is to very quickly revert to the previous state
to unblock development. Then we can discuss what is the better thing to
do here.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Portfolio object created string buffers for Identity resources
that was overlapping on some cases.
Don't calculate pointers by hand, allow compiler to calculate it.
Fixes#64634
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Extend the previous support of creating object instances by allowing
creation of resource instances as well.
Similarly, add support for deleting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The existing driver and sample:
- drivers/bluetooth/hci/rpmsg
- samples/bluetooth/hci_rpmsg
are no longer correctly named, since they now use the IPC subsystem to
send and receive data. The IPC subsystem can use RPMsg as a transport,
but that is one of several selectable backends.
I initially wanted to deprecated both the BT_RPMSG Kconfig option as
well as the zephyr,bt-hci-rpmsg-ipc chosen node in Devicetree. However,
this proved to be undoable in the case of the Kconfig option. This is
because it's a choice option, and those have special behavior. In
particular, the only practical way to deprecate would've been to keep
the old Kconfig option outside the choice (much like it's done in this
commit) but then also add a 'depends on !BT_RPMSG' on each of the
remaining choice symbols *except* on the new BT_HCI_IPC one. This, however,
only works correctly for .conf files. If a board instead sets the
default BT_HCI_BUS_TYPE in the Kconfig.defconfig file then the Kconfig
tree parsing would fail, because it'd try to set it to a value
(BT_RPMSG) that is no longer part of the choice.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
it8xxx2 uses a custom linker script, which was not updated on
dfb3674c4c. This patch naively updates it
to support DEVNULL_REGION.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
The mcumgr SMP UDP configs struct was causing a unique tag name
violation (rule 5.7).
The struct name has been changed from configs to smp_udp_configs.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
mcumgr's SMP UDP transport was unnecessarily using a potentially large
amount of ROM space due to static initialising fields in a
config struct that also contains buffers/stacks.
This has been changed to instead initialise fields in the start
function, reducing ROM usage by ~5K in the default configuration
with IPv4 and IPv6 enabled.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
Mark .noinit section as NOLOAD and move it
next to the other NOLOAD sections. This way
it is removed from a generated image that is
embedded in the rt595 app image.
Signed-off-by: Mike J. Chen <mjchen@google.com>
Implementation of PM in the driver requires PM to be enabled. This was
enabled in the SoC until now and was recently removed.
Fixes#64608
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix examples for HEAP_LISTENER_ALLOC_DEFINE()
and HEAP_LISTENER_FREE_DEFINE().
Delete misused input heap_id variable.
It caused incorrect log output.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Unify spelling of CAN Flexible Data-rate abbreviation to "CAN FD" instead
of "CAN-FD". The former aligns with the CAN in Automation (CiA)
recommendation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Define the storage_partition in the internal flash
instead of the external NOR qspi flash,
so the testcase can PASS on the disco_l4754_iot1 board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
For serialized nRF IEEE 802.15.4 Driver host, avoid using
`nrf_802154_csl_writer_anchor_time_set` too often by caching the CSL
RX time and period and using them to detect any shift on the periodic
pattern.
This improves power consumption by limiting the number of serialized calls.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Add a new `clist` regulator shell subcommand that prints
the list of supported current limits for specified regulator device.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Extend the regulator API about support of `count_current_limits`
and `list_current_limit` functions for the current limits.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
README now cross-references the lora receive sample
so that both can be used together more easily.
Signed-off-by: ingram weeks <ingram.weeks@gmail.com>
Power rails of some peripherals are controlled externally.
This is a case in embedded controllers, where the power of
some I2C devices are managed by the main application
processor.
To ensure that zephyr drivers access the devices where is
powered on, introduce a "monitoring" power domain. It works
by registering interrupt handler with gpio a pin, so that
when power state changes, it will notify relevant drivers.
Additionaly add CONFIG_POWER_DOMAIN_INIT_PRIORITY to replace
harcoded init priority.
Fixes: #51349
Signed-off-by: Albert Jakieła <jakiela@google.com>
Renesas RA always uses interrupt handlers dynamically.
But this test requires static vector tables.
So, it needs to exclude platforms that use Renesas RA.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Add support for the Arduino UNO R4 Minima.
This board is the newest version of Arduino that uses Renesas RA4M1 SoC.
This commit provides only limited support to simplify the initial
support patch.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Adding initial support for Renesas RA UART.
To avoid complicating initial code for supporting the SoC,
I have implemented only the bare minimum for now.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Add initial support for Renesas RA GPIO.
To avoid complicating the initial code for supporting the SoC,
I have implemented only the bare minimum for now.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
To avoid complicating the initial code for supporting the SoC,
I have implemented only the bare minimum for now.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
To avoid complicating the initial code for supporting the SoC,
I have implemented only the bare minimum for now.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Add initial support for Renesas RA clock generation circuit.
It returns a fixed value to simplify the first commit to get the UART
working now.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
In the CONFIG_SPI_NOR_SFDP_MINIMAL configuration this value is hard
coded to 256 bytes. Make it configurable via devicetree.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
The test was printing one line for each packet it was sending
by default. That creates a huge log and slows things down.
Instead, let's only print those with verbosity set at 4 or higher.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Also run some split BT stack tests on the nrf5340 platform
to test this configuration.
Move the selection of which BT tests are built and run
in each platform to files in the tests/bsim/ folder.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
With TESTS_FILE the user could provide a file with a list of
tests to run.
Now we also support that file containing a mix of
tests and paths in which to search for tests.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add sysbuild build files, which allows building this test
both for the targets we could already before
(nrf52_bsim & nrf5340bsim_nrf5340_cpunet)
and also adds support for the a split build with the
nrf5340bsim_nrf5340_cpuapp.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add sysbuild build files, which allows building this test
both for the targets we could already before
(nrf52_bsim & nrf5340bsim_nrf5340_cpunet)
and also adds support for the a split build with the
nrf5340bsim_nrf5340_cpuapp.
Note that when doing a split build the controller is
taken from the hci_rpmsg BT sample, and therefore the
controller configuration in this folder is not used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for sysbuild builds, which can be selected
by settings the variable sysbuild.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
