Change the variable name from **us** to **ms** and increase its size
to **uint16_t** within the min_alarm_handler function. This update
allows the function to correctly handle the millisecond values in the
range of 0 to 999.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The wait times in the self test procedure, according to the datasheet
are 4 / ODR (current set value).
Update the self test procedure by using the delay corresponding to the
current ODR value that is set, instead of default ODR.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
This reverts commit d963900dbd.
Since i.MX 93 is supported by mcux_ccm_rev2, remove i.MX 93 support
from mcux_ccm driver.
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
i.MX93 share similiar register layout with i.MX RT11xx. Change ccm driver
to align with i.MX RT11xx, and make it easier to enable other drivers.
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
The LPS22DF is an ultracompact, piezoresistive, absolute pressure sensor
that functions as a digital output barometer. The LPS22DF provides lower
power consumption, achieving lower pressure noise than its predecessor.
This driver is based on stmemsc HAL i/f v2.3
https://www.st.com/en/datasheet/lps22df.pdf
Signed-off-by: Armando Visconti <armando.visconti@st.com>
It is just used to be able to DEVICE_DT_GET() bus devices from
tests/drivers/build_all in an upcoming commit.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Corrected comapare value of dma_is_enabled as it is compare with
wrong macro to check if channel is enabled or not.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Enhance LPSS DMA to support UART and I2C DMA transfer by
enabling init priority of DMA based on dependency on
parent device.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Replace unrelated part name with the actual driver name in the
adxl372.h header file.
Fixes: a3e7cea ("adxl372: Add driver for ADXL372 high-g accelerometer")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Added a short paragraph explaining how to use pyOCD to flash and debug this
board, as well as a disclaimer requested by NXP
Signed-off-by: Tim Guite <tim.guite@ttp.com>
There are more ipc_service backends that supports multiple endpoint.
This sample can be used for any of those backends, so this commits
makes the sample more generic. The default backend it still icmsg_me,
but now, the sample has files and instructions for icmsg_with_buf
backend.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
The icmsg and icmsg_me backends has limitations in context of
concurrent access to single instance. Some limitations are:
* sending by more thread at the same time may cause -EBUSY
* allocating TX buffer will cause errors in other threads that want
to allocate before first thread sent the message,
* during no-copy receive, when RX buffer is on hold receiving is
totally blocked.
This backend resolves those limitations by adding dynamically allocated
buffers on shared memory next to ICmsg circular buffer. The data is
passed using those buffers, so concurrency is not a problem. The ICmsg
is used only to pass short 2-byte messages containing references to
those buffers. The backend also supports multiple endpoint.
The ipc/icmsg_me sample was modified to support this backend.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
This prevents the compiler from optimizing calloc into an
infinite recursive call.
For example a call to malloc + memset zero at GCC -O2 will be
replaced by a call to calloc. This causes infinite recursion
if the function being implemented *is* calloc.
fno-builtin-malloc forces the compiler to avoid this optimization.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
This avoids duplication of the function signature in several places and
makes the API documentation more clean.
Signed-off-by: Martin Jäger <martin@libre.solar>
Rename the lorawan_set_battery_level_callback to
lorawan_register_battery_level_callback to make it consistent with other
functions for downlink and data rate changed callbacks.
Also making the function void for consistency. The get_battery_level
already checks if the callback is NULL before invoking it.
Signed-off-by: Martin Jäger <martin@libre.solar>
Create copys of the common configuration values when constructing test
scenarios, to avoid mutating the common value with test specific
appends.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
'native_posix_source_files' is used only when CONFIG_NATIVE_APPLICATION=y,
but it was set unconditionally regardless of this Kconfig option.
Set 'native_posix_source_files' under CONFIG_NATIVE_APPLICATION=y to narrow
scope of this variable.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
When connection manager (CONFIG_NET_CONNECTION_MANAGER) is disabled,
application starts right away. Scenario that it covers is when static
networking is used, like with emulators (QEMU, Native Sim, ...).
Since 'connected' flag was not set in such scenario, the internal loop
inside start_client() has ended up early and stop_udp_and_tcp() was called
quickly after starting TCP and UDP clients.
Set 'connected = true', when connection manager is disabled, so that it is
assumed that connection is working for the whole duration of the
echo-client sample.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
`bt_mesh_default_key` is declared as const and thus located in flash.
`bt_mesh_cdb_subnet_key_export` tries to copy to that address which
results in a Bus Fault.
Use separate array for storing net_key.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The native device type name is "native", "native posix" is just
one of the possible target boards (which is going to be deprecated
in the next release).
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
A CoAP client can re-issue an observe request (same endpoint and token)
to refresh it's subscription. No new observer should be registered in
this case.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add a function to the public CoAP API to find and return the unique
observer based on the address and token.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
A recent iface lock removal in ed17320c3d
exposed issues with concurrent access on TX to drivers that are not
re-entrant.
Reverting that commit does not really solve the problem, as it would
still exist if multiple Traffic Class queues are in use.
Therefore, introduce a separate mutex for TX data path, protecting the
L2/driver from concurrent transfers from several threads.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
On SoC series s32ze, Zephyr application cannot run with MPU
disabled, skipping relevant samples/tests
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
The debug.coredump.backends.logging testcase did use 'console'
Twister harness whereas the test suite itself and the rest of
the testcases are implemented as Ztest. This misalignment
allowed to check basic output expected from the logging backend,
but caused inconsistency of the test suite results because
the 'console' Twister Harness can't use test cases' ID provided
by the 'Ztest' Twister Handler.
It is decided to focus the debug.coredump.backends.* suite
on the coredump backend API testing with Ztest.
The logging backend's resulting output should be tested
by its dedicated test suite debug.coredump.logging_backend
(tests/subsys/debug/coredump).
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
