In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace native_posix with native_sim as the
default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of always enabling fuse for native_posix,
let's give users instructions on how to enable it
while building.
In the documentation: replace the references to native_posix
with native_sim, improve the links, mention the flash
simulator, and provide a separate subsection for FUSE access.
Add a separate test for the sample with fuse access enabled
and be sure it is possible to run both this and the basic
one with native_sim (was filtered out before for native_posix)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For native_sim we need to have the fuse library linked with the
native simulator runner, not with the embedded code.
Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
DTLS Connection Identifier support requires DTLS stack
that supports it. MbedTLS support in Zephyr is already
ported in, also some offloaded sockets support it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
After some further investigation, I could find the current solution to
enable zbus channels (by using ZBUS_CHAN_DECLARE) to be used in C++
files, which generates a warning when we mix C and C++ code. This fixes
the issue by using an approach to add the extern keyword only when the
file is being compiled with a C++ compiler.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
For some STM32 MCUs the busy flag of SPI is unreliable. This is a known
issue of the device and described in the device errata.
As a fix implement a configurable timeout which ensures that a call
to spi_transceive will eventually return.
Fixes#64927
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Remove syscalls that allows user threads to set callbacks that
will be invoked by the kernel.
Userspace is not trusted we can't allow a user thread set callbacks
that will be invoked by the kernel and run with supervisor privileges.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Coverity issues need to be resolved and closed by owners, not by the
bot. Other wise we will continue scanning them and reporting them over
and over.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 415b6fc945.
This does not even compile as it attempts to do assignment to a read-only
object (config->config.behaviour).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Split the common keyboard scanning code out of the ITE specific driver
and use the generic code instead.
Note that this changes few timing defaults, the change is not
significant though so I suspect there's no difference in practice.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The SoC header already includes the necessary device headers for
all SoC variants supported.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The SoC header already includes the necessary device headers for
all SoC variants supported.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
To simplify the inclusion of device headers in common code for
NXP S32 devices, make sure all SoCs are including their respective
device headers. This PR adds the missing headers for S32Z/E.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Update this page to account for the fact that now
we have several bsim boards in tree.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Now that we also have this target board, we have
some more options.
Update the docs to reflect these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Polish and correct the documentation to reflect the use
of the native_simulator, and the fact that we have
now more than one bsim board in tree.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update this board docs to reflect that these 2 peripherals
are now supported.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable LinkerServer and PyOCD runners for LPC55Sx6 EVKs,
where it is supported.
It was tested on a real HW.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
- added example of usage Infineon CAT1 i2c driver
- added note that pinctrl nodes need to be configured
as open-drain and input-enable.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Setting slew-rate property is not supported on Kinetis KE series
and the value will not have effect, so this property should not
be required.
We are also planning to reuse the Kinetis pin control binding and
associated driver for NXP S32K1xx devices, which doesn't support
setting the slew-rate rate as well.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Since model struct most of member should not change at run time,
so mark as const will be suitable and safely.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Change the default TF-M model for small profile to match the
configuration set in the profile small configuration file.
Otherwise we would be overriding the profile default.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
LOG_PRINTK needs to run in supervisor mode and since there
is no syscall that allows it to be called from userspace, this
option has to be disabled when userspace is selected.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This syscall is completely problematic in userspace, it does
not check ANY parameter that is given and it uses variadic argument
that are not copied / checked before being used in the implementation,
instead it just pass a pointer to user stack with unknown data is
blindly consumed by the kernel.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Remove anything that would be covered by MAINTAINERS.yml leaving only
mostly instances that are not covered.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Allow this sample in native_sim, and set it as default
integration platform instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Allow this sample in native_sim, and set it as default
integration platform instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix and native_sim are already excluded thru
the lack of required tags.
Let's remove the platform exclude instead of adding also
native_sim to it explicitly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace the references to native_posix with native_sim,
and update link names accordingly.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix include order between platform_ns and tfm_api_ns libraries.
platform_ns functions may depend on tfm_api_ns.
This would typically be platform specific IOCTL services added to the
platform_ns library requiring the tfm_platform_ioctl from the
TF-M platform partition exposed in tfm_platform_api.c
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Drop the input_ prefix fromthe internal functions. Trying to unify the
input drivers to use the same style for function naming, this makes it a
bit more compact and makes it easier to distinguish the common keyboard
structures and functions from the driver ones.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
On xtensa architectures the string "ZEPHYR FATAL ERROR"
comes after the coredump itself. The ordered regex will
incorrectly fail for this arch.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Add configuration lines to be able to use the jlink debugger with this
board. The disco board leaves the debug lines tri-stated until connecting
to stlink, so it is safe to just plug in the jlink and use it.
Signed-off-by: David Brown <david.brown@linaro.org>
Add a missing c-file (buf_simple.c) and use a dedicated label for
Networking Buffers. Also add explicit excludes of the same files to the
Networking section. Without the dedicated label it seems that the wrong
maintainer gets set as assignee for pull requests.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use __nocache_noinit for the Bosch M_CAN MRAM data variables on SoCs
without dedicated MRAM.
Fixes: #64691
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Allow tagging variables with __nocach_noinit.
With CONFIG_NOCACHE_MEMORY=y, this will resolve to __nocache, which implies
__noinit. With CONFIG_NOCACHE_MEMORY=n, this simply resolves to __noinit.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Include the zephyr/dsp/types.h header for float32_t/float64_t type
definitions to avoid conflicts with other subsystems including this header.
Add compile-time asserts to ensure the typedefs meet the requirements of
the CANopenNode module.
Fixes: #63896
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Previous implementation didn't work if CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD
was set to 1. Minmimum value that worked was 2. A value of 1 would
just be ignored and act like 0 with threshold triggerring disabled.
Signed-off-by: Mike J. Chen <mjchen@google.com>
Set Spi StateIndex equal to index of DT Spi node.
Because number of State array is set base on
number of DT Spi node used. If StateIndex is set
equal to Spi instance, StateIndex can be over array.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
