The timing of the sent callback shouldn't be used to determine
when something is sent on air. The callback is issued after the
controller has raised the HCI event "Number Of Completed Packets".
The timing of this event is dependent on the implementation.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Introduce possibility to override `NRFX_DIR` sybol from hal_nordic's
CMakeLists.txt file that specifies source dir for the nrfx drivers.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Update the EFR32BG22 device files inside gecko/Device/SiliconLabs/EFR32BG22
from gecko_sdk to align the codebase of hal_silabs with gecko_sdk 4.3.2
Signed-off-by: Sateesh Kotapati <sateesh.kotapati@silabs.com>
Add power management support to ft5336. The chip can go to hibernate and
reduce power consumption to a minimum, the only way to wake it up though
is by pulsing the reset or wake signal. Only reset is implemented in the
driver right now so only allow this functionality if the reset pin is
defined.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The DMA interface allows start and stop to be called multiple
times and driver should ensure nothing bad happens if the calls
are not balanced.
Fix an issue where after a start-stop sequence the DMA would be
powered down, and then a subsequent stop would result in a crash
as driver accesses registers of a powered down hardware block.
Fix the issue by handling stop without actually reading the hw
registers to check channel status.
Link: https://github.com/thesofproject/sof/issues/8503
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Fixes#65477
Platform key checking seemed to be erroneous;
now the variable names, comments and code seem in line with each other.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Add UI to select preferred search engine when Google Programmable Search is
enabled. The user's preference is saved using local storage.
This also makes the search input field of type "search" for better UX (in
particular on mobile).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add Google Programmable Search engine to the documentation, while
leaving it possible to easily revert to the built-in Sphinx search
engine. As the styling of the search results is apparently not thought
to be easy to tweak, the gcs.css stylesheet might require further
improvements.
Fixes#55173.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Some portions of the documentation do not make sense when shown as
"snippets" in search engines' results. Use "data-nosnippet" attribute to
instruct search engines (Google for sure, hopefully others in the
future) to exclude them.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The "Sphinx search extension" CSS rules are not needed as we are not
using this extension since we are not hosting on readthedocs.io.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Update to a more recent version of Doyxgen Awesome for better
compatibilty with recent versions of Doxygen.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Support lcov > 2.0 tool which has strict error checking and some new
configuration options deprecating syntax used in 1.4 versions.
Fixes#62202
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This picks up custom javscript from Godot documentation and uses CSS
rules we already had in place (only they were not used) to tweak the
page scroll behavior. As folks scroll down the page, the Zephyr logo in
the top right corner gradually disappears, leaving more room for the
navigation menu.
Also, when scrolling in the navigation pane, the UI there is slightly
adapted to make it more clear that the search box is "fixed", plus,
when one reaches the bottom of the navigation tree and continues
scrolling, the "main" page scrolls down.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Similar to what is done in pm_device_runtime_get,
we don't need to wait the device be suspended if
the work is still in the work queue. In this case
we just cancel the work and update the device state
to active.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This test does not define any syscall. It does not need to set
CONFIG_APPLICATION_DEFINE_SYSCALL.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Replace combination of printk() to LOG_DBG() to fix the order of the
test execution logs. The printk() is printed immediately, while logs are
buffered, thus the messages from test are printed out before the stack
logs.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Enable the RNG module interrupt every time it is resumed.
It is done to make sure the interrupt is always enabled. The CR register
may not persist when the device clock is disabled on some chips.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Move enabling/disabling the RNG module to acquire/release functions.
It causes enabling the RNG module for the get_entropy_isr function.
It fixes hanging in the get_entropy_isr function.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
The only difference in the two enums are some entries related to
relocation sections. However, these entries are not used in the
code, so they can be safely removed, along with the mapping function.
Use LLEXT_MEM_* to avoid confusion with low-level "section" names.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
STM32U5X has 128k/256k/512k/1M/2M dual bank Flash.
The address of the 2 bank are continuous, so it's no need a "Dummy page"
in "stm32_flash_layout", which cause wrong slot1 section (for secondary
image), and the BANK2_OFFSET is not right either, which cause
"flash_stm32_valid_range" return a failure.
To fix the issue, just set CONFIG_FLASH_SIZE to STM32_SERIES_MAX_FLASH
Tested on NUCLEO-U545RE with mcuboot.
Signed-off-by: Weifeng Li <weifeng.li@aofrio.com>
Increases 2 variables to be 16-bits instead of 8-bits to allow
for target read sizes, this would only be an issue if someone
changed the default retention block size from the default value
of 16 to a value over 256
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
When using multiple instances of IPC static vring, each instance
should register its shared memory with a unique name.
Instead of a predefined default name, the name of the ipc instance
is reused for the metal device name.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Definition of ADSP_FORCE_DECOUPLED_HDMA_L1_EXIT_BIT,
which is used in the intel_adsp_force_dmi_l0_state function,
is missing.
Signed-off-by: Fabiola Kwasowiec <fabiola.kwasowiec@intel.com>
The dummy L2 layer does not implement any L2 functionality
but it does not mean that it should not implement start/stop
functions that are called when the related network interface
is brought up or taken down.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add tests that check if device is ready or not, and
then verify the functionality of net_if_up() in that case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is pointless to take net interface up if the underlaying
device is not ready. Set also the interface status properly
in this case.
Fixes#65423
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Currently on zephyr, RAIL library is used only by Bluetooth applications,
with this update, it will be able to be used for sample applications
for custom radio phys.
All files were copied from Silicon Labs GSDK v4.2.4.
Signed-off-by: Zoltan Havas <zoltan.havas@silabs.com>
Couple of TLS defines were not in correct documentation group.
Add also missing doxygen comments for TLS defines.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Groupped various defines in socket.h together based on their
usage. This groupping is only for documentation.
Fixes#66081
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Update documentation for SPI_NRFX_RAM_BUFFER_SIZE Kconfig symbol
to reflect new usage of it. Now the symbol specifies size of RX buffer.
The change introducing support for RX buffer placed by a linker in
memory region defined in SPIM devicetree node is in a parent commit
of that one.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
This patch adds support for RX buffer placed by a linker in
memory region defined in SPIM devicetree node. The buffer is placed
in memory region defined as devicetree node. The memory region node's
reference is then stored in `memory-regions` property of SPIM node.
Added build time assertion to check if `CONFIG_SPI_NRFX_RAM_BUFFER_SIZE`
Kconfig symbol has value greater than 0 when given SPIM node has
`memory-region` property.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Add README.rst file with description of sample which shows how to use
pytest and Twister together.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Improve documentation about pytest integration with Twister. Add
examples of usage, improve description of available options and
introduce automatic doc generation of two plugin classes (DeviceAdapter
and Shell) basing on their docstrings from source code.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Since pthread_once() is both the initializer and executor of
pthread_once_t, it can have maximally two states. Since the
implementation in Zephyr previously aimed to maximize libc
compatibility, we opted to use the definition of pthread_once_t
from newlib, which is a structure with two ints.
It does not make sense to use 64 bits to manage 2 possible
states. The control for that should effectively be a bool.
We maintain compatibility with newlib by asserting (at build
time), that newlib's pthread_once_t is larger than Zephyr's
new struct pthread_once (which just contains a bool).
This allows us to delete the non-standard pthread_key.h
header file (finally).
Reuse the pthread_pool_lock in order to synchronize the related
init function (so that it is only called maximally once from any
thread). The spinlock is only used to test the state and the
init function is not called with the spinlock held.
The alternative was to use an atomic inside of
struct pthread_once. But again, that could be up to 64-bits with
Zephyr's atomics implementation.
Ideally we would use C11 generics or something to support atomics
on 8, 16, 32, and 64-bit primitives.
Lastly, also update declarations for C11 threads as they mostly
mirror our pthread implementation.
This needed to be done as a single commit in order to ensure
continuity of build.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Use correct format specifier for LOG_ERR in lwm2m_obj_device.c. The
previously used format specifier of %u was correct for 32 bit systems
but would produce a build warning for 64 bit systems.
Fixes#66441
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Change exception code to use LOG_ERR and align with all other
architectures when CONFIG_EXCEPTION_DEBUG is enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It should be possible to disable exception debug, which is enabled by
default to reduce image size. Add missing guards now that the option is
cross architecture.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This starts using CONTAINER_OF macro instead of inst_by_conn function
wherever possible. It's better approach as the client instance is
a container for parameters passed to the callbacks.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fixed Kconfig to remove dependency between modem_socket and
modem_context, the two do not depend on each other and
should be possible to use independently
Signed-off-by: Alessio Lei <alelei94@yahoo.it>
