According to the Zephyr documentation, the multi-level interrupts
are encoded as follows:
`L1_ID | ((L2_ID + 1) << L2_BITS) | ((L3_ID + 1) << (L3_BITS + L2_BITS))`
This means that when L3 interrupts are enabled, the gen_isr_table.py
script will receive the value of L2_ID + 1. Currently, the script
takes this value and directly compares it with the offsets set via
`CONFIG_3RD_LVL_INTR_xx_OFFSET`. This is wrong because the values from
said configurations are the same as L2_ID and because of that the
script will generate an error. To fix this, use the value of L2_ID
instead of L2_ID + 1.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Increases some of the timeouts so that when using this sample
against other interactive devices (such as a phone or the
Zephyr audio shell), then it's easier to do it in time.
Also updates a few of the printks and ensures that we are not
doing name filtering when we have been requested to sync to
a specific broadcast source by a broadcast assistant.
The test for the sample has also been modified to have a longer
timeout to accomodate for the new semaphore timeout values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Toolchain headers can be include in assembler files causing compilation
error for posix architecture. The fix involves adding
`!defined(_ASMLANGUAGE)` condition to exclude including posix C code in
this case.
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com>
The unicast_stop command takes either "all" or one or more
stream pointers as argument, but the argument handler did
not allow this.
The documentation for the command was also out of date.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The context had a bug where if GMAP was enabled, the context
was only BT_AUDIO_CONTEXT_TYPE_GAME.
The context should also (per BAP spec requirement) contain the
BT_AUDIO_CONTEXT_TYPE_UNSPECIFIED context.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix LLL ISO stream get by group to return stream context
sorted by CIS offset in ascending order.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The assumption of going through 100 iterations of allocating for
work queue is that the HEAP size is 1024 bytes. However, there
are platforms where the HEAP size is inflated due to subsystems
and/or drivers being included. So change the for loop into
a loop where it only stops until there is no memory to be
allocated.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The UP Squared board comes with different CPUs where Atom ones
run at 1.6GHz while the Pentium and Celeron ones run at 1.1GHz.
Since the APIC TSC Deadline timer driver is tied to the CPU
speed, and we were using 1.6GHz as the hardware clock speed,
real world time would not be correct for Pentium and Celeron
based boards (i.e. 1 second sleep requested in application does
not translate to 1 second in real world). Change it to use HPET
timer instead as HPET has the same clock rate for all board
variants. Applications requiring more precise clock rate can
override this in their configuration.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Support of stm32h5 targets with pyocd is required to allow debugging.
Provide runner configuration and update board documentation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
The log2 prefix was deprecated and changed to log some time ago,
but log2_generic() seems to have been inadvertantly left with
the old prefix.
Rename log2_generic() to log_generic() to follow suit.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Fix handling bus-off events in the Bosch M_CAN driver backend:
- Cancel all pending TX buffers when entering bus-off state
- Call all pending TX buffer callbacks with -ENETUNREACH when entering
bus-off
- Automatically initiate bus-off recovery if
CONFIG_CAN_AUTO_BUS_OFF_RECOVERY=y
Fixes: #68953
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The Broadcast Assistant API should be fully independent of the scan
delegator. Therefore the new struct bt_bap_bass_subgroup has been
defined to avoid a dependency.
Fixes: #68338
Signed-off-by: Ping Wang <pinw@demant.com>
Binaries are located in multiple build directory subfolders when built for
multiple domains (sysbuild is one example). Parse domains.yaml and preserve
files across all domains for testing when --prep-artifacts-for-testing
option is used.
Signed-off-by: Mike Szczys <szczys@hotmail.com>
If the IPv6 DNS address is not a valid address, DNS will fallback
to the IPv4 DNS address.
Fix copying the IPv4 address to the IPv6 address by using
the IPv6 address destination length.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
In error cases, where send_data() returns early, the allocated net_buf
is not free'd, causing a memory leak affecting the net_buf pool.
Fix this by freeing the allocated net_buf before returning early
from send_data().
Signed-off-by: Sean Farrelly <sean.farrelly@outlook.com>
Settings NVS adds entry into Settings NVS cache after writing it
into flash. Previously, the entry was added into cache only
on the second writing attempt that caused very huge timing
despite cache was enabled since it was still empty.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The lower bits of the brightness control registers were erroneously
shifted even though FIELD_PREP already does the shifting. In practice,
the effect is negliglible but of course should be fixed.
Also add missing parenthesis around shifting operations to satisy static
analysis.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@escolifesciences.com>
Replace slave_register with target_register and slave_unregister
with target_unregister.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Commit 940c66f82e added a bunch of
ACPI PNP ID to x86 boards but skipped those for ACRN. And commit
34a2fbfba1 changed the behavior of
PCIe controller to looking for PNP ID, it results in compilation
error due to build asserts. So add the PCIe controller node to
the ACRN base DTS file.
Fixes#68956
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Driver BBRAM for STM32 had a compilation error: "unknown type name
'RTC_TypeDef'" due to missing include file.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
The warning should only apply for configurations where the
device may actually send ISO data (e.g. not the ISO sync receiver).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The nRF54* SoCs are in a very early stage of production and the software
supporting them is to be considered experimental. Document this
accordingly in the respective boards.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The conversion of the raw sensor value overflows because
only a 32 bit multiplication is executed.
Fix the issue by promoting the raw sensor value to uint64_t before
executing the multiplication.
Analysis:
The current implementation overflows for all raw values grater
than 9544(14-bit).
But according to the datasheet the sensor has a maximum resolution of
20-bit. So Multiplying that value with 450.000 would need at least 39
bit to avoid an overflow, hence do it using 64-bit arithmetic.
Fixes CID 330657
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add changes to Ethernet and Wi-Fi drivers for v3.6.
Also add information about generic Ethernet and Wi-Fi changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Quite a few of userspace related functions, macros and struct
have been renamed (z_ to k_). So make notes in the migration
guide.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
