This commit introduces a driver for ADC keys, a common circuit design where
keys are connected to an ADC input via a resistor ladder.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Always execute tx_notify from a single context. For sanity and ease of
debugging / observability.
The previous behavior was calling from BT_RX thread + system workqueue.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Changes include:
- Improving handling of frames for unconfigured DLCIs.
- Adding logs and outputting error codes in failure cases.
- Adding warnings to not reuse buffers.
- Fixing comments.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
In the function bt_l2cap_chan_set_state, BR
channel is treated as LE Chan.
The BR L2CAP channel state is updated
incorrectly.
Add a function bt_l2cap_br_chan_set_state
for BR L2CAP channel. For BR/EDR channel,
call bt_l2cap_br_chan_set_state directly.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Adds use of CHARGER_PROP_DISCHARGE_CURRENT_NOTIFICATION and
CHARGER_PROP_SYSTEM_VOLTAGE_NOTIFICATION_UV to the charger
sample application.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Adds the path to the sample application in the charger API
area of the MAINTAINERS file.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Moves the charger API sample app from samples/charger/ to
samples/drivers/chargers/ as mentioned in issue #65032.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Adds a CHARGER_PROP_SYSTEM_VOLTAGE_NOTIFICATION_UV property to
issue a notification to the system when the system voltage falls.
This system voltage is provided by the charger to the system and can
suddenly dip during peak loads.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Adds CHARGER_PROP_DISCHARGE_CURRENT_NOTIFICATION property
to notify the system of a excess battery discharge event.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Corrects expected type mentioned in the documentation of the
CHARGER_PROP_INPUT_CURRENT_NOTIFICATION.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Verifies that there is no host RX buffer leak due to disconnections.
That is, not actual host buffer objects but rather the number of buffers
that the controller thinks the host has.
If there is a desynchronization between those two, the result would be that
the controller stops forwarding ACL data to the host, leading to an
eventual application timeout.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Optionally record run-id and run-attempt github context variables
as additional test suite environment properties on upload into
ElasticSearch to track re-runs of CI workflows.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
In the scan delegator when adding a source, the state was not
marked as active before calling the PA sync callback, which
would prevent applications from requesting PAST in that callback.
This commit also adds and fixes a few log statements.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implement bind() and recvfrom() for UDP sockets. This is achived by
setting remote field in net_pkt which in return makes recvfrom() fill
in *src_addr. This is only implemented for passiv mode and CIPDINFO needs
to be enabled. Also set net_if to non-dormant when enabling AP mode to
make binding to a port and address possible.
Signed-off-by: John Johnson <john.filip.johnson@gmail.com>
The sys_mm_drv_unmap_page function first replaced the tlb entry with
the default one and then read the physical address that was mapped.
However, it was already overwritten, so it always release the default
physical address instead of the truly mapped one.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Added sys_mm_drv_update_page_flags function that allows to change access
flags to a already mapped memory region.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Add traffic class priority custom option to customize traffic class
priority base for throughput performace.
Wi-Fi traffic performance depends on cooperation between net threads
and Wi-Fi driver threads. So we want traffic class threads priority
to be more flexible to fit more vendors.
Eg: when traffic class tx thread priority is higher than driver tx
thread, it will consume much more cpu time and send packets until driver
queue full.
When traffic class tx thread priority is lower than driver tx thread,
it will become serial transmition, also affecting throughput.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
This change reduces the memory footprint by changing the data type of
`valid_5g_chans_20mhz` from `uint16_t` to `uint8_t`.
Additionally, since the maximum channel number for 5GHz Wi-Fi is 177,
it can fit within the `uint8_t` range.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Compare value and DAC resolution in `dac_write_value` and return -EINVAL
if the value is above supported resolution.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Check for BASS and PACS, while scanning for
Broadcast Audio Sinks was wrong in the
Broadcast Audio Assistant sample.
Signed-off-by: Lars Knudsen <LAKD@demant.com>
Add a command `net ipv4 gateway` that allows
setting IPv4 gateway for an interface from net shell.
Signed-off-by: Mateusz Karlic <mkarlic@antmicro.com>
Add CONFIG_NET_SOCKETS_DTLS_MAX_FRAGMENT_LENGTH for limiting
the Maximum Fragment Length (MFL) for DTLS with Mbed TLS.
This is needed when MBEDTLS_SSL_OUT_CONTENT_LEN and
MBEDTLS_SSL_IN_CONTENT_LEN are set to larger values than the MTU
of the network and IP fragmentation is not supported.
Signed-off-by: Markus Lassila <markus.lassila@nordicsemi.no>
In current implementation, the upper is not notified when BR ACL
connection is established.
L2CAP does not know that ACL connection has been established.
All fixed channels will not be notified. Then The SDP server
cannot work properly.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
This patch handles multiple interrupt lines for errors. Each of the
4 DW SPI error interrupts (txo_err, rxo_err, rxu_err, mst_err) can
use a different line of the GIC, instead of using a single line of
the GIC for all error interrupts (err_int).
Signed-off-by: Julien Panis <jpanis@baylibre.com>
This patch manages DW SPI driver MMIO region. As a result, the driver now
runs properly on 64 bit platforms.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
When CONFIG_SYSTEM_SLOPPY_IDLE is not set, then system
can sleep for -1 means waking Up at the max possible
counter value (INT_MAX)
When CONFIG_SYSTEM_SLOPPY_IDLE is set sleeping K_TICKS_FOREVER
means never wakingUp
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Provide multiple write transaction support for BlueNRG-MS, st_hci_spi_v1
protocol. Since by default, BlueNRG-MS write buffer supports up to 127
bytes; however, it is possible to have consecutive write transactions
so as to send data more than 127 bytes.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Added IS_ALIGNED macro to check if a pointer is aligned to
a given alignment. Additionally, removed a macro with a
conflicting name in drivers/crypto_intel.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
This flag indicates that only passive transmissions are allowed in that
channel for that regulatory domain.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
There are quite many BT host test images being built.
Today these are all built in parallel, causing a quite
high load.
Let's split them in their separate sub-scripts,
so we don't parallelize too many builds,
and users have more granularity if they only
want to build a subset.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CIS tests are building quite many
apps on their own.
Let's split them in their separate sub-script,
so we don't parallelize too many builds,
and users have more granularity if they only
want to build a subset.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Make sure that socket service is started earlier than
config library. This is enforced in config libs init.c
but set the default value here too.
The reason for this is that the config library might need
to start dhcpv4 server which needs socket service to work,
so the ordering is important here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We must make sure that IPv6 configuration pointer is valid
so that the hop limit can be set for a given interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We must make sure that IPv4 configuration pointer is valid
so that the TTL can be set for a given interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As the interface init function might configure the system
such a way that would affect the naming of the network
interface, we need to call the init before setting the name.
This is mostly needed by Wifi where the Wifi driver needs
to mark its network interface as Wifi interface as by default
the Wifi interface will look like Ethernet one.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix the dead lock between rx_q and tx_q thread.
When tx_q thread prepares to send ARP packet, it might get
the net_if_tx_lock in net_if_tx(), then in net_arp_prepare(),
it will try to get the arp_mutex.
At the same time, if the rx_q thread receives an ARP reply
packet, in arp_update(), it will get the arp_mutex first,
and flush the packets in arp pending_queue and try to get
the net_if_tx_lock. Then the dead lock occurs, two threads
stuck and all the packcets can't be freed.
In arp_update(), taking the net_if_tx_lock first then taking
the arp_mutex can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
'buffer' argument is read only, so it can be 'const'. This makes it
compatible with POSIX specification of write(3) syscall.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
