Use TC_END_REPORT() to report "PROJECT EXECUTION FAILED"
instead of a call to printk() for ZTEST enabled tests. as
this prints the failed message as well as the RunID (and
whatever will be added in future).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Allow the use of the NTP server address, set by
dhcpv4 option, by the net_init_clock_via_sntp function.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Add test case verifying that send() returns an error when called after
TLS session has been closed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It was an overlook to return 0 on TLS send() call, after detecting that
TLS session has been closed by peer, such a behavior is only valid for
recv(). Instead, an error should be returned.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
SSIDs can contains commas (,) when receiving scan results (+CWLAP) or
status (+CWJAP) over AT command from ESP-AT chip. This is in conflict with
modem subsystem argument parsing, which separates arguments automatically
whenever comma is encountered.
Use a direct modem command parsing, so that commas within quoted strings
are taken into account to be part of that string, instead of being treated
as delimiter.
This solves `wifi scan` and `wifi status` Zephyr shell commands output, for
networks containing commas (like "My_2,4GHz_AP") as part of SSID.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
According to [1], SSID and PSK need to be escaped:
Escape character syntax is needed if SSID or password contains any
special characters, such as , or " or \
Implement character escaping to fix connection attempt to WiFi APs
containing special characters as part of SSID, like "My_2,4GHz_AP".
Increase "connect command" buffer length to handle worst-case scenario of
all the SSID and PSK characters being special characters.
[1] https://docs.espressif.com/projects/esp-at/en/release-v2.4.0.0/esp32/AT_Command_Set/Wi-Fi_AT_Commands.html#id6
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Return error to the caller if no data was received or there
was some other error. Earlier we did not check the error
condition properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The cmd_sync_broadcast command now also takes an optional broadcast
code, to support syncing with encrypted broadcasts.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This allows to properly drop single CMUX frames that are
too big to fit in the receive buffer, keeping track of
where they end so that following frames are received
correctly regardless of the data contents.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The SOF delimiter byte may be omitted when a frame follows another
that just ended with that byte.
The parsing used to expect that second delimiter anyway,
which resulted in PPP frames going missing.
As an additional improvement, dropped bytes as well as the length
of received frames are now (debug) logged.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
modem_pipe_attach() can send events before returning, which could
provoke a crash as ppp->pipe, still NULL at that time, could be
used either in receiving (if the pipe had some data pending) or
in sending (if the PPP module had already been attached and had
some data to send in its transmit buffer).
ppp->pipe is now set before modem_pipe_attach().
Also, the ATTACHED_BIT is now set only after having actually attached.
And finally, the send_work is now scheduled on PIPE_EVENT_OPENED
so that data is flushed when the (closed) attached pipe is opened.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
This makes the modem backends use the log level
set for the modem modules instead of the default one.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Some Xtensa cores do not support NMI, so XCHAL_HAVE_NMI=0 and
XCHAL_NMILEVEL won't be defined at all causing
arch/xtensa/include/xtensa-asm2-s.h to throw compilation error.
Fixes: #67855
Signed-off-by: Maciej Kusio <maciejkusio@meta.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
wget is required for installing Zephyr SDK on macOS.
Add this to the homebrew install command as a dependency.
Signed-off-by: Andrew Thompson <andrew@clone.co.nz>
Iterate through I2C addresses in devicetree overlay
for build_all/gpio to avoid conflicts.
Fixes#69551
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
The default 512 bytes stack size is a bit tight for some architecture
and leads to samples running out of stack. Let's default to 1024 and let
the user tweak it down if necessary.
Suggested-by: Benjamin Cabé <benjamin@zephyrproject.org>
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This makes it possible to set the minimum IPv6 packet size that
can be sent without fragmentation. The default value is 1280 bytes.
This commit allows user to set the IPv6 MTU value within reasonable
limits [1280, 1500].
Fixes#61587
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We select sockets service API in Kconfig but should select also
sockets API so that user does not need to set the sockets API separately.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "net sockets" command did not print network management
socket information properly but claimed that the socket
was IPv4 one which it is not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The net_mgmt socket does not support poll() or fcntl(), so
return EOPNOTSUPP error if user tries to use those functions
for AF_NET_MGMT type socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This adds additional memory region property
to NFCT peripheral. This is not mandatory
property, it adds possibility to user to
specify memory region for DMA transfer.
If it is not set then data buffer is placed
in default RAM with other data.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Signed-off-by: Dominik Chat <dominik.chat@nordicsemi.no>
Simply added the missing 'a' in guaranteed. Found this
when I was too lazy to search for the correct spelling
and was hoping to just grep for it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Build vendor LLL as separate library so that independent
compiler flags can be supplied if required.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Skip doc/security/vulnerabilities.rst when checking for undefined Kconfig
symbols as older vulnerabilities can contain references to removed Kconfig
symbols.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Opcodes for erase is taken from jedec basic flash parameter table
These expects 3 byte addresses.
When running with 4 byte addresses, opcodes to be used shall be taken
from JEDEC 4-byte Address Instruction Parameter table
Signed-off-by: Brian Juel Folkmann <bju@trackunit.com>
This new version is required to handle the upcoming IPC-related DT
structure (i.e. BELLBOARD/VEVIF).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add length checks local to the parsing function. This removes the need
for a separate data validation step.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
According to commit 400c1fa744 which
introduced rule A.5 to the coding guidelines, the initial exception list
was based on the non-standard function availability in minimal libc.
gmtime_r() however, has not been included to the list, although it's
present in minimal libc since 3e8df8b369.
This commit fixes this, by adding gmtime_r() to the rule A.5 exception
list.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
gmtime_r() has been in the minimal libc for years, however it was not
added to expcetions due to an overlook. In order to do this however, it
has to be moved first to the common libc area, so that it's available
to any libc that may not implement it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adds support for the CP9314 switched capacitor converter. The
CP9314 is a multi-level DC/DC converter capable of operating in
2:1 and 3:1 modes.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Emulate SERIAL_SUPPORT_INTERRUPT for UART_NATIVE_TTY, using a thread that
polls the tty and invokes the callback.
This allows interrupt-driven subsystems such as modbus to use a native tty,
which is useful for testing purposes.
Signed-off-by: Björn Stenberg <bjorn@haxx.se>
