Adds tests related to the shuffling of the tests:
* -B, --subset
* --shuffle-tests
* --shuffle-tests-seed
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Set status = "okay" for temp device tree node to allow use
of nRF 802.15.4 Radio Driver on the nrf54l15pdk_nrf54l15_cpuapp board.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Set status = "okay" for ieee802154 device tree node to allow use
of ieee802154 on the nrf54l15pdk_nrf54l15_cpuapp board.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Used RADIO_IRQ number is based on information provided by DT rather
than direct use of RADIO_IRQn.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
For use nRF 802.15.4 Radio Driver on nRF54L series there is
necessary update for nrfx_glue.h file. It follows the pattern
used for other nRF family members.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Adds a test to verify the saving and restoration of the HiFi
AudioEngine registers. Twice as many threads as there are CPUs
are created and each thread sets its HiFi registers with a
unique set of values. If after a context switch, the HiFi AE
registers contain any unexpected data, we then know that the
registers were either not saved or restored properly.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Adds the necessary code required to unconditionally save/restore the
HiFi AE registers. The macros xchal_cp1_load and xchal_cp1_store
are defined in the Xtensa HAL.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Updates the xtensa_irq_base_save_area structure to include space
for saving/restoring the HiFi AudioEngine registers used by CP1.
The starting address of these HiFi AE registers also needs to be
referenced from assembly, so it is added to the set of symbols
symbols for which we need an offset to be auto-generated.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Currently, the state transition function doesn't allow
the re-configuration of an already configured channel
(i.e: CHAN_CONFIGURED -> CHAN_CONFIGURED transition). This
causes problems when using `pulseaudio` and `SOF` because
the same channel ends up being configured multiple times
in the beginning due to how pulse seems to work. Logically
speaking, re-configuring an already configured channel is
not wrong so this commit solves the issue by allowing
the CHAN_CONFIGURED -> CHAN_CONFIGURED transition.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Replace the use of a memcmp of a temp buffer filled with
the comparison value with a direct comparison of
the read buffer contents.
Improves speed of the function (no more memset() call)
and reduces stack usage.
Signed-off-by: Mike J. Chen <mjchen@google.com>
On HAL RTD version 1.0.0, there is available Canexcel_Ip_DeactivateMD()
API that have similar capabilities as can_nxp_s32_abort_msg() API,
can use to instead.
Remove the reg grp_ctrl and reg base_dsc_ctrl that unused
after implementation this.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Incorporated changes requested by @keith-zephyr:
1. Grammar fix
2. Make explicit that transition to self in super-states is not supported
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
Brings SMF framework closer into alignment with accepted Hierarchical State
Machine operation by:
1. Allowing 'programming by difference' by having some child states handle
events and prevent propagation up to the parent run actions while others
propagate events up to a common handler in a parent state.
2. Optionally allow initial transitions within a parent state to determine
the most nested child state to transition to.
3. Adding a test case for `CONFIG_SMF_INITIAL_TRANSITION` and
`smf_set_handled()`
4. Updating documentation for the new API (and fixing some references)
There was discussion in https://github.com/zephyrproject-rtos/zephyr/issues/55344
about not making the initial transition a Kconfig option, but I'm not sure
of any way else of doing it without permanently adding a pointer to each
`smf_state` entry, which is a problem for resource-constrained devices.
This does not fix https://github.com/zephyrproject-rtos/zephyr/issues/66341
but documentation has been updated to warn users of the issue.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
Do not enable Standby low-power mode by default since the associated
Kconfig PM_S2RAM is disabled by default. Otherwise we could enter an
unsupported low-power state.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
The added configuration files allow the sample to be run
on the nRF52840 present on the nRF9160 DK with the nRF9160
(running SLM) being the modem and communication happening
through pins that are routed internally between the two.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
- A small delay is added after the post-restart L4_CONNECTED event
is received to prevent trying to send packets too quickly. Otherwise
the first packet would not get sent and the sample would hang on recv().
- Some logs and function parameters are fixed.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add support for LVGL rounder callback function. Sometimes,
either the underlying display controller and/or the LCD host
controller might impose restrictions on frame resolution.
For instance, the E1394AA65A display model should impose that
either axis of a frame be multiple of 2 pixels or the Renesas
LCD controller of the DA1469x SoC, should impose that the
stride value, number of bytes between consecutive frame lines,
be multiple of 4 bytes.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
lld gained support for the --print-memory-usage flag somewhat recently
(May 2023). Associate this flag with the memusage property when building
with lld, similar to what is done for GNU ld.
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
Add devicetree based settings for resolution, axis inversion and sleep
mode enable. Keep the resolution setting in its own function so it can
be called by the application again in runtime if needed.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
SOC_TOOLCHAIN_NAME was used instead of the SoC name for setting include
path, so all SoCs were using the same path. Originally this was relying
on SoC (before hwmv2), so reverting back to using the SoC name instead
and renaming directories as well.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was part of the mega hwmv2 commit. Looks like hpet drivers heavily
relies on soc.h. Reverting this for now while we look for a proper fix
and remove reliance on soc.h for drivers.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We were missing mocking for normalized_name and board detection was not
working correctly after moving to hwmv2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make sure we run twister and west unit tests on branches, to avoid
breakage when introducing changes to those branches.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
During HWMv2 porting there was some build fails missed from
typos in the RT1064 and RT11XX series, fix these.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Including HWMv2 Kconfig in sysbuild allows sysbuild to introduce
configuration options or defaults based on selected board and SoC.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The active key mask can be used for supporting multiple keyboard layouts
with a single firmware. A possible use case is to support keyboard with
or without a numpad, in which case an entire set of columns may be
missing. Add a check to detect this condition and skip scanning that
column entirely if no keys are defined in it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Added missing condition to check if log backend is configured before
calling the function: z_shell_log_backend_disable. Without this, in some
configurations, a compilation error appeared due to calling a
non-existent function.
Fixes: #69555
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@verkada.com>
The dlc->session is invalid in the callback
hfp_hf_disconnected. The behavior of obtaining
an ACL connection handle through an invalid
pointer is unknown.
Add a field "struct bt_conn *acl" to "struct
bt_hfp_hf". Save acl connect handle to "struct
bt_hfp_hf::acl" in function bt_hfp_hf_accept.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
C++ compilers forbid usage of compound literals with -Wpedantic enabled.
They also forbid the usage of designated initializers for standards
lower than c++20.
So switch to explicit initialization, that would not make compilers
angry at us.
Signed-off-by: Mykyta Poturai <mykyta_poturai@epam.com>
fix QSPI NOR flash is25wp064a input page programming to 32h
as 38h isn't functional. Also adjust the frequency to max
possible value from nRF52 as 32MHz as the flash supports upto
133MHz.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
