When receiving a UDP packet, net_conn_input() searches for a
matching connection within `conn_used`.
However, when receiving UDP packets simultaneously from multiple
clients, we may encounter a situation where the connection that was
supposed to be bound cannot be found within `conn_used`, and raise
the ICMP error.
This is because, within recv_udp(), to avoid the failure of
bind_default(), we temporarily remove it from `conn_used` using
net_conn_unregister().
If the context already has a connection handler, it means it's
already registered. In that case, all we have to do is 1) update
the callback registered in the net_context and 2) update the
user_data and remote address and port using net_conn_update().
Fixes#70020
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
This commit adds the new internal function for update the callback,
user data, remote address, and port for a registered connection
handle.
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
This commit adds the new static function for change the remote
address and port to connection, and replaces the changing process
for remote address and port in net_conn_register().
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
The net_conn_change_callback() is not currently being called by
anyone, so this commit moves to static function, and replaces
the change callback parameter process in net_conn_register().
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
Since the move to HW model v2, the MCUxpresso NXP SDK drivers got
updated during the build due to a missed rename. This caused parallel
builds and CI to become flaky.
This fixes issue #70215.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Use `DT_REG_HAS_IDX()` instead of `DT_NODE_EXISTS()` when checking
if for a given nodelabel the base address of the associated node
should be validated, so that the validation is performed only if
the base address is available. This prevents build failures in cases
like the os_mgmt_datetime test where the `rtc` nodelabel is used for
an emulated RTC.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
A Bug in the watchdog driver code allows an unconfigured
WDT timer channel to be feed.
The first configured WDT timer channel has an id of zero.
At this point, data->m_allocated_channels is equal to one.
The condition of the if statement is invalid and allows
channel one to be feed.
Change the test condition from greater to greater-or-equal.
Add check if channel id is less than zero.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
This commit fixes Kconfig.nxp_mailbox depends on is now
set to correct value DT_HAS_NXP_MBOX_MAILBOX_ENABLED.
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
This commit changes the value of the `arch` from `riscv64` to `riscv`, so
that it is in line with the rest of the RISC-V boards.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The nrfx_qspi driver in nrfx 3.4.0 started checking conditions that
could trigger anomaly 159 on nRF5340 so make sure that QSPI transfers
are only performed with properly configured clocks (PCLK192M undivided
and HCLK128M divided by 2).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
New hal_nordic revision contains nrfx 3.4.0 which adds support
for nRF54H20 and nRF54L15 devices.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
The mutex was removed in tcp_recv() where it doesn't seem
to be needed anymore as tcp_conn_search() got
tcp_mutex. In the other areas the tcp_mutex was
narrowed down to protect only the list.
Signed-off-by: Daniel Nejezchleb <dnejezchleb@hwg.cz>
During stress test with WiFi connect, disconnect, ping and throughput
traffic, ARP table updating failed issue may occur.
In arp_prepare(), if packet allocate failed, should add the arp
entry back to arp_free_entries, to avoid this entry is leak forever.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
The comments for `index` and `num_colors` in `struct led_info` were
mistakenly swapped. This commit corrects them to accurately reflect their
actual purpose.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Fix up the BUILD_ASSERT so that it does not trigger if the resolution
cpi is not specified in the devicetree and left to the default value.
Also use the correct spelling for "cpi".
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Both VEVIF and BELLBOARD test cases are unidirectional from the core
executing the test (cpuapp). For VEVIF, cpuapp pings, and for BELLBOARD,
cpuapp pongs.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The bonding info is not loaded after the Bluetooth
initialization again.
Call settings_load after the Bluetooth initialized.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
For command zperf udp download 5001 192.168.10.1,
zperf will bind both ipv4 and ipv6 sockets on ipv4 address.
But bind ipv6 socket will fail, thus command return fail.
Fix it by check ip address when zperf download.
For ipv4 address only bind ipv4 socket.
For ipv6 address only bind ipv6 socket.
For unspecific address bind both ipv4 and ipv6 sockets.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Due to number of IRQs the ROM offset, that contains MCUboot,
needs to be moved to address that is aligned with 2048 byte
long vector table.
This comes from Cortex-M requirement where vector table needs
to be placed at offset equal to lowest power of two number
that will fit vector table.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Mateusz Michalek <mateusz.michalek@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add checks for vendor specific data path in ULL and HCI driver, to
enable use of vendor data path for BIS reception.
Signed-off-by: Morten Priess <mtpr@oticon.com>
- Calculate broadcaster channel for control subevent
- Calculate sync receiver channel for control subevent
- Fix broadcast CSTF only set in first subevent
- Remove ctrl_chan_use from LLL, as there is no longer a reason for
storing it.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Update the legacy low latency variant of the ticker
implementation to skip to next periodic interval when
ticks to expire is behind the current tick. This makes
the low latency variant of the implementation consistent
with the default ticker implementation.
Also, cleanup conditional compiles in the implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Unlike the remainder of the RT10xx series, the RT1011 SOC requires that
the flash configuration block be placed at an offset of 0x400 bytes,
instead of the start of the flash.
Fixes#70090
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
If I2C recovery mode uses GPIO push-pull to drive(3.3v), it will result
leakage in a pull-up voltage of 1.8V on the power rail, leading to
damage to 1.8V devices, including SoC, sensors.
Therefore, the recovery mode should be changed to GPIO open-drain type
to avoid this.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
My recent change overlooked this configuration, which is not tested in CI
currently.
If someone had enabled it, they would've just gotten an unfixable assert.
The correct test would be checking if the current thread is the system wq,
but I think the compiler can't know that and can't remove the "dead" code.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add support for devices that use the kinetis
GPIO/PORT scheme but with the slight modification
that the interrupt control bits are in the GPIO
peripheral instead of the PORT peripheral.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The enum define is not implemented with the same name on all SoC's.
Use the register define instead.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Add support to enable PORT control clocks
2. Add support for LP Flexcomm
3. MCX family has a different Clock API for USDHC.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The Low Power Flexcomm driver manages the interrupt handling
and provides an API to register interrupt callbacks.
Register the NXP LPUART interrupt handler.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. This driver allows to configure the Low Power Flexcomm
interface as a UART, SPI or I2C device.
2. Manages the interrupts and dispatches it to the
appropriate device driver.
3. A Flexcomm interface can be configured to be used as
I2C and UART device. However a SPI device cannot be used
concurrently with I2C or UART. Add checks for this feature.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
This binding is for the NXP FlexComm Interface. The
driver will setup an interface for use as a UART, SPI
or I2C device.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
RD RW612 BGA board is built targeting secure mode execution. If
CONFIG_TRUSTED_EXECUTION_SECURE is not set, base address declarations in
CMSIS header files will be incorrect, causing a variety of issues. Fix
this.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
