Let find_program in codechecker/sca.cmake search for both 'CodeChecker'
and 'codechecker'. Before this change, I wasn't able to run CodeChecker
because cmake couldn't find it. (Ubuntu 23.10, CodeChecker 6.21.0 installed
via snap)
Signed-off-by: Benedikt Streicher <streicher.b@posteo.de>
Once Wi-Fi is associated few parameters like listen interval and
power-save mode cannot be changed. The state for association is
"ASSOCIATED" and not completed. Even after state transitions to
COMPLETE, it can still go back to other states, e.g., PTK/GTK renewal.
Fix the state check.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
To minimize time the CPU spends when preparing for sleep, make sure
the pending transactions are finished before calling `wfi`.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
If host is not reading RTT data (because there is no PC connection
or RTT reading application is not running on the host), thread will
stuck continuously trying to write to RTT. All threads with equal or
lower priority are blocked then. Adding detection of that case and
if host is not reading data for configurable period then data is
dropped until host accepts new data.
Similar solution is using in RTT logging backend.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Create the folder for the results if it does not exist.
Fixes these warnings in CI:
```
touch: cannot touch '/__w/zephyr/zephyr/./bsim_bt/
53_bsim_results.xml': No such file or directory
realpath: /__w/zephyr/zephyr/./bsim_bt/
53_bsim_results.xml: No such file or directory
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
ANSI color is great for viewing output in a terminal, but currently it
also gets written out to the `handler.log` file. Text editors usually
don't render these, resulting in a hard-to-read file with a lot of
gibberish interspered. This commit strips ANSI sequences from lines
before writing them to the handler log file. This change does not
affect what is printed in Twister's console output, so one would still
see the colors there.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
All implementations of random number generator where duplicating logic
for sys_rand32_get. Since this subsystem already has a logic to
generate random values of arbitrary size, we can generically implement
sys_rand32_get on top of that.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Enable DMIC on RW612 BGA board. The DMIC is enabled for both onboard
MEMS microphones for this board, and the board is enabled with the DMIC
sample and test
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Since I have integrated some samples into samples/drivers/led_strip,
seting up redirection from the deleted apa102, lpd8806, and ws2812.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Set the PLL1_Q divider to 6 give a can core clock of 80MHz to
resolve fdcan_clk reception problem because M_CAN requires that
the host clock "APB1" should be higher or equal to the CAN core
clock "PLL1_Q".
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Add necessary overlay and stm32h573i_dk in i2c_target_api test case
to enable the board.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Enable Transmitter Delay Compensation whenever the data phase timing
parameters allow it.
Fixes: #70447
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a utility macro for calculating the Transmitter Delay Compensation
(TDC) Offset using the sample point and CAN core clock prescaler specified
by a set of data phase timing parameters.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the unused "tx-delay-comp-offset" property from the base CAN FD
controller devicetree binding.
Having a static Transmitter Delay Compensation (TDC) offset is useless.
The offset needs to match the data phase timing parameters in order to
properly configure the second sample point when transmitting CAN FD frames
with BRS enabled.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove broken support for Transmitter Delay Compensation from the Bosch
M_CAN backend driver.
Even if this was enabled via Kconfig, the TDC bit in the DBTP register set
during driver initialization is overwritten in can_mcan_set_timing_data(),
turning TDC off.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The Virtual LAN is changed to use the virtual network interfaces.
Add information what changes might be needed because of this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The gPTP is not suppose to be run on top of VLAN and the
earlier support was just for testing purposes. Remove VLAN
support now after the VLAN overhaul.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN interfaces are now Virtual type so we need to
collect only the Virtual interfaces and not Ethernet ones.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Virtual LAN logic is now done in Ethernet L2 so no need to manipulate
VLAN packets in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print also network interface index together with the pointer value
in order to get more useful information what is going on in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print information whether a multicast address is properly
joined to a multicast group when print addresses using
"net iface" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As the interface type is always Virtual, no need to print it.
Print instead the name of the network interface as it is more
useful to the user.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
