Remove `bt_l2cap_le_endpoint.init_credits` that has zero uses and is
just taking up RAM for no reason.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add new Microchip MEC chips using the new MEC5 HAL and
add a HAL version of a legacy chip named MECH172x.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add support for the goworld 16880 display module. As this display module
only features an FFC cable, it is added as a board overlay for the RW612
BGA. This module uses an ST7796S display controller as well as an FT7401
touch controller (which is managed by the FT5336 input driver)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This is part one of several changes to add more methods to the bitarray api
so that it can be used for broader usecases, specifically LoRaWAN forward
error correction.
Signed-off-by: Lucas Romero <luqasn@gmail.com>
This is part one of several changes to add more methods to the bitarray api
so that it can be used for broader usecases, specifically LoRaWAN forward
error correction.
Signed-off-by: Lucas Romero <luqasn@gmail.com>
This is part one of several changes to add more methods to the bitarray api
so that it can be used for broader usecases, specifically LoRaWAN forward
error correction.
Signed-off-by: Lucas Romero <luqasn@gmail.com>
Reschedule from '6:25 and 18:25, Monday-Friday'
to 'everyday at the same time'.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
Added ioannis-karachalios as maintainer in
the hal_renesas
Moved andrzej-kaczmarek to collaborators and added
blauret as collaborator too.
Signed-off-by: Ben Lauret <ben.lauret.wm@renesas.com>
Add support for Nuvoton numaker board numaker_m2l31ki.
m2l31x has 4 MPU regions and can't afford one more region
for TEST_USERSPACE, so set CONFIG_TEST_USERSPACE=n.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Allow to provide from CLI, threshold value for number of test case roots
selected for execution base on changed files.
When such threshold will be exceeded, full scope will be executed.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
An earlier pull request implementing observe support was merged too
hastily. It had a few issues:
1. The predicate for whether a request should be marked not ongoing was
wrong (it checked ret != 0 instead of ret < 0)
2. Without observes in mind, MID-based deduplication is not a required
feature. Deduplication was handled implicitly - the exchange would get
dropped after the first response anyway, so duplicate responses would
not get matched to anything. But with observes, there are several
responses in an exchange. This commit adds this.
3. Using coap_request_is_observe(&internal_req->request) in the response
handler requires the whole request to stay in scope for the lifetime of
the observation, which I observed was not always the case. Adding an
is_observe bool to the internal struct improved stability significantly.
With these fixes, GETs with observe option works very well.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
The NXP Kinetis temperature sensor depends on CONFIG_ADC. Make the driver
Kconfig select CONFIG_ADC to get better CI coverage (enabling the driver
when CONFIG_SENSOR is enabled without depending on CONFIG_ADC=y).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Corrected virtual memory size to match the range supported by the
Translation Lookup Buffer. The TLB size is 16 MB, however the first 128 KB
is dedicated to LPSRAM and bypasses the TLB. This was taken into account in
KERNEL_VM_BASE, so KERNEL_VM_SIZE was reduced accordingly.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
For the choice ETH_STM32_HAL_API_VERSION, both options
ETH_STM32_HAL_API_V2 and ETH_STM32_HAL_API_V1 had the same
prompt "Use new HAL driver". This commit fixes the prompt for the
legacy driver.
Signed-off-by: Charlie Gilliland <charliegilly1@gmail.com>
- Fix mcxn94x flash write-block-size from 16 to 128.
- Fix flash_program() return error 0x65,
that means "Address or length does not meet the required alignment."
- The mcxn94x Flash ROM API flash_program() start address and
the length must be 128 bytes-aligned.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The bt_csip_set_coordinator_csis_member_by_conn function
was seemingly missing, causing the CAP unit tests to not build.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The values set as a min_ram requirement were far from the actual RAM
usage reported during build, make them more realistic.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As native_posix is no longer supported, due to incompatibility with
CONFIG_POSIX_API, remove a dedicated config for it.
A config for qemu_cortex_m3 needed to enable RNG, as otherwise it's not
available for the platform and gives build error.
Finally, enable qemu_cortex_m3 build in the CI.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
These are safety checks to guard against silent data corruption. The
implementation currently does not clobber bufs, but soon it will. The
bufs will be zero-copy segmented and fragmented, which involves
overwriting already-sent contents with headers for the next fragment.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Changes the parsing of boolean input parameter "PolicyApply"
to DFD start command to use shell boolean parse library.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
port infineon CAT1A (psoc6) to HWMv2:
1. move dts\arm\cypress\** to dts\arm\infineon\cat1a\legacy
2. remove dts\arm\cypress\**
3. rename dts\arm\infineon\psoc6 to dts\arm\infineon\cat1a
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
In the current driver, the longest time of the watchdog timeout is ~8
seconds because the pre-scalar is fixed at 32 (WDCP=5). This commit
removes this limitation by dynamically calculating the pre-scalar
according to the watchdog timeout setting from the API.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Tom Chang <CHChang19@nuvoton.com>
Adds a missing network include file which was causing an undefined
function build failure, likely caused by a recent change affecting
includes in other header files
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Declutter `fatal.c` by moving the stack unwinding logic into
`stacktrace.c` and guard its compilation with `CMakeLists.txt`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
