Fix a few issues with the probes documentation for NXP boards:
- fix references to debug probe type in probes page introduction
- add an explicit "Install the host tools" step for the LPC-Link and
MCU-Link based debug probe update steps.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
RT1050 EVK rev A boards (with rev A silicon) are not well supported by
Zephyr. Update the documentation page to remove the reference to A0
silicon, as the page describes details specific to the RT1050 EVKB with
rev B silicon.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update iMXRT10xx board debug sections to use common snippets, which
describe debug configuration settings shared between all these boards.
This should help avoid documentation falling out of date in the future.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The following heap-related Kconfigs shared by the picolibc &
minimal libc have been deprecated for more than 2 releases,
remove them and update the Kconfigs accordingly:
- `CONFIG_MINIMAL_LIBC_MALLOC_ARENA_SIZE`
- `CONFIG_MINIMAL_LIBC_REALLOCARRAY`
Cleanup the handling to support the deprecated malloc arena
size configuration values.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The following Kconfigs have been deprecated for more than 2
releases, remove them:
- `CONFIG_SUPPORT_MINIMAL_LIBC`
- `CONFIG_MINIMAL_LIBC_MALLOC`
- `CONFIG_MINIMAL_LIBC_CALLOC`
- `CONFIG_MINIMAL_LIBC_REALLOCARRAY`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The following Kconfigs have been deprecated for more than 2
releases, remove them:
- `IEEE802154_CC13XX_CC26XX_SUB_GHZ_RADIO_TX_RETRIES`
- `CONFIG_IEEE802154_2015`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
These Kconfigs should have been deprecated for more than 2
releases, remove them:
- `CONFIG_CPP_MAIN`
- `CONFIG_CPLUSPLUS`
- `CONFIG_LIB_CPLUSPLUS`
- `CONFIG_EXCEPTIONS`
- `CONFIG_RTTI`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`CONFIG_CONFIG_SETTINGS_FS` has been deprecated for
more than 2 releases, remove it and its associated source
code.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Selection of these GIC Kconfigs have been deprecated
for more than 2 releases, users should use the devicetree
method instead, update the Kconfigs.
The SOCs below have been updated to not select `GIC_V3`, since
their devicetree already have the required compatible:
- fvp_aemv8r
- rzt2m
- rk3658
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The following Kconfigs:
- `CONFIG_ETH_STM32_HAL_RANDOM_MAC`
- `CONFIG_ETH_STM32_HAL_USER_STATIC_MAC`
- `CONFIG_ETH_STM32_HAL_MAC3`
- `CONFIG_ETH_STM32_HAL_MAC4`
- `CONFIG_ETH_STM32_HAL_MAC5`
have been deprecated for more than 2 releases, user should
have switched to the devicetree method now, remove them.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`CONFIG_LOG_DOMAIN_ID` has been deprecated for years and
shouldn't be used according to its documentation, remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`CONFIG_BT_DEBUG_LOG` has been deprecated for more than 2
releases, replace it with `CONFIG_BT` + `CONFIG_LOG`:
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
These clock selection Kconfigs should have been deprecated for
more than 2 releases, remove them:
- `CONFIG_COUNTER_RTC_STM32_CLOCK_SRC`
- `CONFIG_COUNTER_RTC_STM32_CLOCK_LSI`
- `CONFIG_COUNTER_RTC_STM32_CLOCK_LSE`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`lwm2m_engine_get_resource()` has been mark for deprecation for
more than 2 releases, but we are still using it in tree now,
because the `__deprecated` marker was probably forgotten in the
initial deprecation commit.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
These functions have been deprecated for more than 2 releases,
remove them:
- zephyr_smp_rx_req
- zephyr_smp_alloc_rsp
- zephyr_smp_free_buf
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
These token enums been deprecated for more than 2 releases,
remove them:
- JSON_TOK_LIST_START
- JSON_TOK_LIST_END
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Update airoc_wifi_host_buffer_get function to set final
buff size based on input “size” param.
Update airoc_mgmt_send to use airoc_wifi_host_buffer_get
instead net_buf_alloc_len.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Since b53a792ff0 Zephyr has the ability to define tristate Kconfig
options. When a tristate option FOO is selected as a "module", this
results in autoconf.h defining CONFIG_FOO_MODULE, not CONFIG_FOO.
This patch allows the check_compliance script to also accept references
to a Kconfig symbol ending in _MODULE if the prefix is defined.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Before merging the BIS specific codec configuration with the
subgroup codec configuration, we should ensure that the
BIS data is not empty, as that would trigger an error from
bt_audio_data_parse.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Execute 'zephyr.exe' in application build directory as 'current working
directory' (cwd). This makes sure that native_sim specific drivers (like
flash simulator with file backend in 'flash.bin') are using unique context
for external resources with relative paths.
This fixes executing native_sim tests in twister with flash simulator.
Previously a shared 'flash.bin' was used for all executed 'zephyr.exe'
processes in twister. After this patch a unique 'flash.bin' file is used
for each tested sample, since those 'flash.bin' is placed in application
build directory instead of twister root directory.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The `orientation-flipped` dt property was dropped from the devicetree
binding for the ssd16xx display driver. Add a note to the migration
guide directing users to now set orientation at runtime.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fixed#74370, the issue is caused by the update to introduce MMIO
mapping, after MMIO mapping, should use data->base for device
base memory address.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Some stm32 series, do not have a LL_DBGMCU_SetTracePinAssignment
function to enable trace IO port, this is the case with the
stm32h7 serie.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
For station and internal AP coexist case, station connected to
external AP, ping from station to external AP cause cpu hang.
Internal AP dhcpv4 server register handler echo_reply_handler
on icmp handler by net_icmp_init_ctx for dhcp server snoop
feature. Ping also register handler handle_ipv4_echo_reply on
icmp handler for ping cmd. If no external station connect to
internal AP, input parameter ‘user_data’ of function
echo_reply_handler is NULL. When we trigger ping process,
icmp_call_handlers fetch all handlers from icmp handler
if receive any ICMP packet, so echo_reply_handler be called,
but input parameter is NULL, cause CPU hang.
Add input parameters check to fix this issue.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
hci_uart_async/debug.mixin.conf is used to enable RTT logging
for hci_uart_async sample. RTT can be used to avoid conflict
between different serial interfaces because the sample uses
UART as an interface for HCI communication.
RTT_CONSOLE option enabled in the debug.mixin.conf depends on
CONFIG_USE_SEGGER_RTT so enabling CONFIG_USE_SEGGER_RTT by
default makes it easier to build the project with RTT enabled
Signed-off-by: Ivan Iushkov <ivan.iushkov@nordicsemi.no>
Add isolated pool (static and dynamic) to the sample illustrating how to
use that and performing some testing in different scenarios.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Currently, zbus uses a single global `net_buf`pool to publish messages to
msg_subscribers. It would be good to have a way to separate the pools for
channels related to critical parts of the systems to avoid publication
failure on these particular channels. These channels will not use the
global pool. They can set an isolated pool by calling the
`zbus_chan_set_msg_sub_pool.`
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
When CONFIG_X86_EXCEPTION_STACK_TRACE is enabled, also forcibly
enable CONFIG_THREAD_STACK_INFO. Without the thread stack info,
it is possible the stack unwinding would go out of the thread
stack and into unknown memory, resulting in hard fault.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The current atmel,sam-tc-qdec sensor implementation shared the timer
counter node. This create issues when users wants define both modes.
The current proposal changes the qdec dedinition to be a child of
tc and refactor all the chain of definitions.
Fixes#71312
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Replaced the software `reverse` function, used for bit reversal, with
the intrinsic `__RBIT` function.
This utilizes the hardware bit-reversal instruction for improved
efficiency.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
