The scan_delegator_security_changed function had a few issues
that were addressed:
1) It used an internal field to check level rather than the
value provided by the API
2) It did not treat bt_addr_le_is_bonded as a boolean return value
3) It did not properly truncate the recv state (fixed by using the
proper function bass_notify_receive_state)
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add few missing button codes, these matches the ones used in Linux to
cover HID mouse buttons 1 to 8.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Seemingly newer versions of gcc wrongly detect a variable is used
when it is not set, this is not the case the compiler is wrong,
add a default set to null to prevent the fake warning appearing
as an error in CI
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Fixes an issue with using SMP on devices that do not support
unaligned memory access e.g. Cortex M0 which would result in a
hard fault
Signed-off-by: Jamie McCrae <spam@helper3000.net>
The 14/12-bit variants (AD5692R/AD5691R) require the data to be in the
upper bits of the two byte data field of the write command. See table 12
and the associated footnotes in the AD5693R/AD5692R/AD5691R/AD5693
datasheet.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Fixes the Kconfig for dynamic service registration to make it depend
on dynamic database support instead of selecting it, which prevents
issues whereby it is not actually selected
Signed-off-by: Jamie McCrae <spam@helper3000.net>
DTS binding area was capturing everything under dts/bindings instead of
leaving those to the areas affected.
Remove general wildcard and add some of the missing file filteres in the
relevant areas.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Address the cases where submitter is also the maintainer of the code
changed and other areas are being changed. In this case, assign to the
next area maintainers instead of assigning to submitter.
Example: maintainer of component A introduced significant changes to
area A but also makes changes to other areas B and C. Right now
maintainers of B and C are added as reviewers.
This change will assign to the next area after A, i.e. B in cases where the
submitter is also the maintainer of area A.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix a build error when CONFIG_SPI_ASYNC is set.
The issue was detected by CI
```
spi_xlnx_axi_quadspi.c: In function 'xlnx_quadspi_isr':
spi_xlnx_axi_quadspi.c:489:21: error: 'ctx' undeclared
489 | if (ctx->asynchronous) {
| ^~~
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix the busy wait in the MDIO driver that was causing timing
problems in systems with real time requirements performing tasks
more frequently than about a millisecond.
Restructure the code to be less redundant and change the busy wait
kconfig to microseconds instead of millliseconds. Also actually signal
to the mdio driver that it can use the interrupt instead of busy
waiting, this seems to have been forgotten.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Instead of including the boilerplate text and showing it in the created
issue, use comments that are still displayed when editing, but not shown
in the final issue, avoiding confusing and mixup between actual issue
and template text.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added a few missing CONFIG_ prefixes to Kconfig option references,
reshuffled the CAN release notes a bit to account for the
can_get_min_bitrate() being both introduced and deprecated within one
release cycle.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Set the remote address of received sockets.
This is necessary for services that rely on the remote address.
DNS relies on the remote address to be set properly.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Added definition MCUX_SDK_SAI_ALLOW_NULL_FIFO_WATERMARK
to fix timeout fault on the I2S_Speed test
using MIMXRT1170_evk/mimxrt1176/cm7.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Calls to other function may clobber ip & lr too so these register need to
be added to the clobberlist.
r3 is not actually used in z_arm_switch_to_main_no_multithreading so it is
also removed from the clobber list.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Add a diagram to illustrate a test application's project
components with relationships between Ztest and Twister
objects.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `include/zephyr` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `include/zephyr/logging` and `mgmt`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `include/zephyr/arch` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `include/zephyr/net` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `include/zephyr/dt-bindings` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This tests shows that there is a problematic buffer configuration.
The host locks up when `CONFIG_BT_BUF_ACL_RX_COUNT` is smaller or equal
to the number of connected peers, and all those peers send an L2CAP PDU
that needs re-assembly at the same time.
Although this seems far-fetched, this bug has been observed in a
real-life situation on actual hardware.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Following changes in HCI drivers
(https://github.com/zephyrproject-rtos/zephyr/pull/72323) the build for
the snippet allowing to have the Bluetooth shell run with BabbleSim was
broken.
Fix the snippet by disabling the HCI UART driver.
Add a twister test case that will build the snippet in CI to avoid
silent breaking.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
When validating the flash runner configurations in `soc.yml`, the only
SoCs that were considered had to be defined under this structure:
family:
- series:
- socs:
- name: ...
However, the `family` and `series` keys are optional, so the `soc.yml`
files can also be arranged like this:
family:
- socs:
- name: ...
series:
- socs:
- name: ...
socs:
- name: ...
The solution is to move the validation code further down, so that it can
reuse the SoC data that was already correctly parsed while initializing
a `Systems` instance.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Getting the required alignment size for memory region node
and device node needs to be handled by a separate macro.
Otherwise alignment of single byte is reported for any region.
Add a test that checks for this particular issue.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Rework configuration so that it does not require special treatment
in testcase.yaml.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rework configuration so that it does not require special treatment
in testcase.yaml.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In `lib/posix/options/shm.c` we don't include stdio.h
header but use standard SEEK_xxx definitions (i.e. `SEEK_SET`)
which cause build issues (if the minimal libc is used).
Fix that.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Validate driver in CI by adding the `watchdog` tag to the `mps2/an385`
platform, which uses the driver.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The CMSDK watchdog hardware only supports a single timeout channel.
Return the documented error if more than one timeout is requested to be
installed.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The previous calculation was multiplying the timeout in milliseconds
by the clock frequency, giving a cycle count 1000x larger than it should
be.
Fix the calculation and rename `reload_s` to `reload_cycles`, as the
cycle count is what this actually contains.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Fixed a few bad or missing documentation parts of iso.h
Also formatted some parts to be consistent with not just
the file itself, but also with bluetooth.h
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove references to new device APIs that are not supported by the
samples. Remove the reference to the UART API from the console sample
because it is not really used there, but add it to the CDC ACM sample.
Fix references in HID, MSC and UAC2 samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add missing documentation to USBD_DEVICE_DEFINE,
USBD_CONFIGURATION_DEFINE and USBD_DEFINE_CLASS macros.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The POSIX macros PAGE_SIZE and PAGESIZE (queriable through
sysconf()) were conditionally defined only if an existing definition
did not already exist. These should be defined unconditionally in their
header to ensure they get the correct values.
If these macros are defined elsewhere with a different meaning, that's a
problem. There was an issue where PAGESIZE was already defined with a
different meaning. See #74623 and #74428.
The POSIX macro ATEXIT_MAX is also conditionally defined and should be
unconditionally defined, but there is currently a definition in picolibc
(picolibc/newlib/libc/include/stdlib.h) so this change will be done
separately.
This commit defines PAGE_SIZE and PAGESIZE unconditionally.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
- Fix formatting in board_antenna.c by using the standard config in
Zephyr.
- Reduce diff with cc1352p1_launchxl/board_antenna.c as much as possible
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
- Use antenna switch sky13317 instead of hack
- Base the board_antenna file on cc1352p1_launchxl/board_antenna.c
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Remove an overlay with a wrong name not being picked up,
and change the "A" revision overlay to be used by all revisions.
Also fix the "clocks" property in the overlay causing a fault with sai4.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Updates the minimum version of imgtool to 2.1.0, which is one year
newer than the 2.0.0 release
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
