This is just a step forward to make cmd_ipd_parse_hdr() capable of parsing
IP address and port when CONFIG_WIFI_ESP_AT_PASSIVE_MODE=n. After obtaining
this information (IP and port) it will be simply much easier to write this
information into 'struct esp_socket' directly, instead of passing to upper
layer.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Treat ':' similar as ',', '\r' and '\n', so that AT response parameter
parsing can be gracefully stopped.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use it to get information about RSSI. In subsequent commits this helper
will be used to get other information as well.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
'struct sockaddr_in' should contain port number in network byte order. This
means that htons() macro should be used, instead of ntohs().
This was working before since both htons() and ntohs() end up in calling
BSWAP_16().
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This is related to change in commit dacb3dbfeb
("iterable_sections: move to specific header")
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When LwM2M engine is requested to stop,
emit the disconnected event unconditionally.
There is really no reason to skip the event
on network error, or if we have never been registered.
Fixes#76422
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Fix the second k_thread_foreach_unlocked argument, it's supposed to be
an instance of ta_cb_user_data as that's what's it casted back to in
thread_analyze_cb. Current code results in an exception and crash for
single core applications.
This is a regression introduced in 1b6e0f6479.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In thread_analyzer_auto(), it casts one function argument
directly into unsigned int. However, on 64-bit platforms,
the compiler complains about casting from pointer of
different size (-Wpointer-to-int-cast). So cast it first to
uintptr_t before casting it into unsigned int.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Compressing doc build to upload it to AWS S3 is talking several minutes.
Use -T0 to run xz in parallel mode to speed up the process.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This variable is only used under DUAL_BANK condition and a warning
is generated in !DUAL_BANK case, so move its definition accordingly.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Some boards claim `sdhc` support but use the `zephyr,mmc-disk`
instead of `zephyr,sdmmc-disk` compatible, with the former not being
compatible with this sample.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Move the check for valid disk drivers to compile time to enable twister
to run the configure step without errors.
Signed-off-by: Jordan Yates <jordan@embeint.com>
While Breathe seems to not care, the proper role to reference an
enumerator is :c:enumerator:
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Breathe is not very strict about the types used to reference C domain
objects (ex. referencing a struct using `:c:type:` would work, and vice
versa) but other tooling might be. This commit fixes some of such
incorrectly documented elements.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Integrated the application version feature of the build system with
the default configuration of the Bluetooth DIS module and its Firmware
Revision characteristic.
The firmware revision string now defaults to APP_VERSION_TWEAK_STRING
if the application version feature is used in a project. This specific
version format is used to unify version formatting with other parts of
Zephyr like the MCUboot module and its versioning Kconfig:
CONFIG_MCUBOOT_IMGTOOL_SIGN_VERSION
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Allow an application to add a Block2 option to an initial request for a
resource. For any subsequent requests as part of a blockwise transfer,
drop the application-added Block2 option since the coap_client must
append a Block2 option with updated NUM and SZX fields based on the
server response.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Booting the hello world sample fails with an error on the odroid go:
I (124) quad_psram: This chip is ESP32-D0WD
I (124) esp_psram: Found 4MB PSRAM device
I (124) esp_psram: Speed: 40MHz
I (125) esp_psram: PSRAM initialized, cache is in normal (1-core) mode.
SPIRAM size is less than configured size, aborting.
abort()
The device features only 32 Mbit PSRAM (4 MiB), see
dts/xtensa/espressif/esp32/esp32_wrover_e_n16r4.dtsi
included from
boards/hardkernel/odroid_go/odroid_go_procpu.dts
Signed-off-by: Gero Schwäricke <gero.schwaericke@posteo.de>
Remove HTS221 sensor support from sensortile_box_pro as it has been ruled
out from final version. In fact, HTS221 is in the process of being
terminated and is not recommended for new design. The candidate replacement
is SHT40 from Sensirion, which is available also as a DIL24 adapter, which
can be plugged on sensortile_box_pro board.
See SENSEVAL-SHT4XV1:
https://www.st.com/en/partner-products-and-services/senseval-sht4xv1.html
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The documentation does not provide any guides on how to configure
the MCO pin, and responsebility is given to the application.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
During driver init make sure that the IRQ_CTL field is set before enabling
the interrupts. Fixes the i2c read error on startup.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Add support for the Mikroe BLE TINY Click shield that contains the
Renesas DA14531 Bluetooth LE Module.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Add usbd_device_set_bcd_device() for setting the bcdDevice device
descriptor value.
The default bcdDevice is set to the version of Zephyr being used, which may
or may not be what a downstream USB device wants it to be.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Rename usbd_device_set_bcd() to usbd_device_set_bcd_usb() to make room for
other BCD encoded values being set.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
In the sample, print the jesd216_bfp_density is expressed
in bits. add the unit to avoid confusion with the Flash
density expressed in bytes (dw2 entry)
Page size is for programming expressed in bytes, meaning
program execution on bytes basis or here page basis.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
When QSPI configuration is the dual-flash, the total
flash size and erase size are doubled. This is handled
with a STM32_QSPI_DOUBLE_FLASH factor which doubles
the values of one qspi component.
Note that SFDP table is for ONE flash component.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Some of the fields currently in hid_device_data are constant.
Move them to a const config struct to save some RAM and drop the rest of
the data static initializers to runtime to save some flash as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Adafruit feather is a generic name that could match many
boards. Renamed to reflect actual board name:
- Adafruit Feather nrf52840 Express
There are two boards based on the nrf52840, so keeping directory
generic to support additional board defs with mostly shared dts.
Signed-off-by: Jacob Winther <jacob@9.nz>
Add the configuration with a board overlay to execute
the samples/subsys/task_wdt on the nucleo_f091rc
Adjust the window-watchdog clock to PASS the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Set the Mode Register definition of the SDRAM command Mode
register to 0x230 when programming the CAS_LATENCY
of the external memory mode.
Adjust the delay on read data path.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Rename it from litex,eth to litex,liteeth
to reflect the new name of the driver.
Zero got removed from the litex
ethernet compatible, as it now supports
multiple instances.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
add helper for interrupts, so multiple
instances of peripherals work.
this way out-off-tree peripherals are supported.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
