The driver can run in either native_posix or native_sim.
Let's make sure to set the dependencies acordingly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
LwM2M SEND functionality is defined in LwM2M v1.1
So quard the condition with protocol version, not
server object version.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The Host Interface Type in the DEVCNT register sets the HIF type
(either eSPI or LPC).
Currently, it is configured in the host-interface-related drivers like
eSPI or SHI. However, some I/O pads sourced from VHIF in the other
modules such as GPIO and I3C also rely on this field. It might be
problematic when using those I/Os without enabling eSPI or SHI drivers.
This commit moves the setting from the specific drivers to the global
system initialization function scfg_init().
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Introduce Controller dependent EVENT_MAFS_MIN_US value to
use as the value when populating the aux offset between
Extended Advertising primary and auxiliary channel PDUs.
This can be used as workaround for peers having difficulty
receiving Extended Advertising PDUs with near 300 us MAFS
values used in aux offset calculations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Propose myself as collaborator to areas I have contributed to lately
in order to more easily follow/take part in them and help in those
where there was no collaborator.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Merge "TF-M integration" into "West project: trusted-firmware-m".
The former was a superset of the latter.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Merge "Mbed TLS" into "West project: mbedtls".
Also, change the label to a more fitting one.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
As Renesas Hal is not compatitble with C++98 we use
filter CONFIG_HAS_RENESAS_RA_FSP to skip the test
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Initial support for EK-RA8D1 board this commit
only support basic GPIO and Serial driver for
RA8D1 board
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Initial commit to suppor RA8D1 SoC
This is deveop base on RA8M1 so it will have similar stucture and
feature
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Relax the radio packet pointer assignment deadline assertion
until access address being transmitted. The PDU buffer is
probably only needed just after access address is being
transmitted or received by the radio. This will give some
more breathing room for slow CPUs like in nRF51x SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression using speed optimization introduced in
commit 1b7fe792e0 ("Bluetooth: Controller: Support Link
Time Optimizations (LTO)").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in encrypted connection introduced in
commit f3deccda91 ("Bluetooth: Controller: CCM read data
to early when DF enabled on PHY 1M").
Due to this nRF51x SoC hang waiting to encrypt and/or
check MIC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In case of ISR latencies, if packet pointer has not been
set on time then we do not want to check uninitialized
length in rx buffer that did not get used by Radio DMA.
This would help us in detecting radio ready event being
set? We can not detect radio ready if it happens twice
before Radio ISR executes after latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Only 3 bytes (PDU_EM_LL_SIZE_MAX) is required for empty PDU
transmission, but in case of Radio ISR latency if rx packet
pointer is not setup then Radio DMA will use previously
assigned buffer which can be this empty PDU buffer. Radio
DMA will overrun this buffer and cause memory corruption.
Any detection of ISR latency will not happen if the ISR
function pointer in RAM is corrupted by this overrun.
Increasing ISR latencies in OS and CPU usage in the
ULL_HIGH priority if it is same as LLL priority in
Controller implementation then it is making it tight to
execute Controller code in the tIFS between Tx-Rx PDU's
Radio ISRs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISR profiling when using single timer for tIFS radio
switching wherein in the timer is cleared on every radio
end. Hence, the captured timer value is the latency and
does not required the radio end timestamp to be subtracted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use uint16_t to store ISR profiling value to avoid overflow
in case of higher latencies.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix in-system ISR profiling for advertiser and connection
role for the missing implementation when there is CRC error.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The interval and latency for a CIG are set for each direction now,
allowing applications to use e.g. 10ms for sink ASEs and 7.5ms for
source ASEs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Gets experimental and deprecated symbols directly from Kconfig instead
of rely on hardened.csv.
This way we keep the tool consistent with Zephyr's code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add name to choice symbol, so that default value can be changed
downstream.
Developed-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Add name to choice symbol, so that default value can be changed
downstream.
Developed-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
- Remove the `strlen`, as it is unnecessary for safe copying.
- Limit the `strncpy` to `sizeof(fsm->terminate_reason) - 1`
to ensure the last byte is reserved for null-termination.
- Add an explicit null terminator to guarantee correct string termination.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Instead of disabling code with a specific compilation switch, enable it
and apply `__maybe_unused` in the `ns16550_outword` and `ns16550_inword`
functions to make the codebase cleaner.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Correct the following typo in Kconfig and
the corresponding function.
- Kconfig.it8xxx2 from `BUADRATE` to `BAUDRATE`
- Correspoding function from `burdrate` to `baudrate`
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
The max window time of RaspberryPi Pico WDT is 8,388,607 us(0x7FFFFF),
But 20,000ms have been set.
Correcting the value to 8,000ms to pass the test.
This was a problem that was discovered because the fix in
ccedcd1ac0 now properly handles the error.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Cloning a packet for a capture may fail due to insufficient memory.
In such a case, the networking statistics should be updated
to reflect this processing error. This commit updates the processing
error count on the capture tunnel network interface because this is
the interface that the captured packet would have been assigned to.
Signed-off-by: Tom Finet <tomfinet@outlook.com>
xtensa_mmu_init() is called really early in the boot process
where the _kernel struct has not yet been initialized, and
thus we cannot use it to determine if the current CPU is
the boot CPU. In some cases, this may skip the call to
initialize the page tables which leaves us with incorrect
page table entries. Fix it by using a static variable to
determine whether the page tables have been initialized so
we only do it once per boot.
Fixes#76909
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Samples, that were obtained by profiling perf tool, can be be translated
into flamegraph using stackcollapse.py script.
Originally-by: Yonatan Goldschmidt <yon.goldschmidt@gmail.com>
Signed-off-by: Mikhail Kushnerov <m.kushnerov@yadro.com>
Implement stack trace function for x86_32 arch, that get required
thread register values and unwind stack with it.
Signed-off-by: Mikhail Kushnerov <m.kushnerov@yadro.com>
