This commit should deal with fixing unbalanced policy state locks.
When PM and PM_DEVICE are declared, default state, policy locks
should be given only when active.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
This Kconfig has wrongly been added to defconfig files. It is not the
right place for it. It has never been the right place for it. Drivers
that need it should select the symbol in their Kconfig entries. Drop
PINCTL from Kconfig.defconfig and add proper select at Kconfig.sam*.
Fixes#78619
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
- Modify the macro in source code AGT to get the right data from
device tree
- Modify name of agt node
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Include value of 30 us as not valid to set alarm for RTC counter.
Change included to allow RTC timer to be properly set to use
RC_FAST_D256 as clock source.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Add OS timer implementation making use of the Sleeptimer HAL.
Sleeptimer integrates tightly with the Silabs Power Manager HAL,
and must be used as the OS timer to achieve optimal power consumption
when using the radio.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
- boards: renesas: Add support for agt.
- drivers: counter: Add support for counter driver use agt
- dts: arm: Add support for agt.
- dts: bindings: Add support for agt counter driver.
- soc: renesas: Add support for agt counter driver.
- samples: drivers: counter: alarm: Add support for RA8
This is initial support with only basic functionality for counter
operation on Zephyr using AGT hardware, current support for
count source is limited to LOCO and PCLKB, other count source
like underflow signal external pin or AGTIO from another AGT
channel will be added in later support
Signed-off-by: Ha Nguyen <ha.nguyen.fz@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Force capture call so that timer counter value is updated
accordingly.
This also adds get_value_64 counter API function.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Make sure to stop timer counter before interrupt is cleared,
otherwise it might re-trigger it due to default interrupt level mode.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
When building with native_sim, We need to specify
```
#define _POSIX_C_SOURCE 200809L
```
to make `gmtime_r` available.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add timer device name autocompletion to the commands.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
These callback functions are not used outside of the file, make
them `static`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Common counter driver based on timer for MAX32xxx MCUs
To use as wakeup source wakeup-source parameter shall be
defined as below
&lptimer0 {
status = "okay";
clock-source = <ADI_MAX32_PRPH_CLK_SRC_ERTCO>;
wakeup-source;
counter {
status = "okay";
};
};
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add barrier between triggering Capture task and reading CC as otherwise
it is possible that CC read will occur before task is triggered when
bus is busy.
Add barrier between reading previous CC value and writing the new one.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Tmr and dtmr drivers were missing a flag which tells the
counter_is_conting_up function that the counter is counting up. So I've
added the flag
Signed-off-by: Krystof Sadlik <krystof.sadlik@nxp.com>
Updated the counter_mcux_lptmr driver to support multiple
instances of the lptmr peripheral. Also added a new
binding property to identify if the user is using
counter-mode or pulse mode. since we were previously using the
prescaler value to check this which could be wrong
if used as a division value for getting the freq.
Added a property that allows the user to decide
what the counter value in lptmr should be divided by.
Cleaned up INIT macro for lptmr.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Add checks to return value of esp_intr_alloc to avoid drivers init
returning 0 when interrupt allocation fails.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
The STM32 devices like stm32F0/G0/C0 which have a f0-rcc compatible
does not have APB2 prescaler : do not try to set it.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Set LPO 1KHZ clock for RTC if clock source 'LPO' is selected.
The frdm_ke17z512 has no 32KHZ OSC, the RTC clock comes from SOSC,
RTC_CLKIN, LPO 1KHZ. But usually the SOSC is connected with 8MHZ
oscilator, so only 1kHZ LPO is usable.
Update the nxp,kinetis-rtc.yaml to select RTC clock source.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Support short relative and late alarms for NXP System Timer Module
counter driver. The late alarm detection algorithm applied, is based on
existing counter drivers.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Convert NXP System Timer Module driver to a native driver.
Timer prescaler in tests is updated because short relative alarms
sometimes give false positives.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Removed PM device runtime support from drivers in PD_SYS domain.
Update the rest device drivers to call pm_device_runtime_get/put()
functions when CONFIG_PM_DEVICE_RUNTIME is enabled.
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
These clock selection Kconfigs should have been deprecated for
more than 2 releases, remove them:
- `CONFIG_COUNTER_RTC_STM32_CLOCK_SRC`
- `CONFIG_COUNTER_RTC_STM32_CLOCK_LSI`
- `CONFIG_COUNTER_RTC_STM32_CLOCK_LSE`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
LPTIM is not available in STOP3 mode, so RTC needs to be used instead.
This code usese similar approach as STM32WBAx for suspend to ram.
The STOP3 is disabled by default in device tree.
Signed-off-by: Adam Berlinger <adam.berlinger@st.com>
Updated the driver to start with a value to compare the counter
with otherwise the counter will not start until the user sets
the top value manually, an issue that will occur inside the counter
test.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Fix error due to compatible string changing in DT and
forgetting to update this driver with the change.
Also make the counter symbol hidden.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fix the warning about control reaching end of non void
function by adding a default to the switch statement.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This commit should add all the functionality needed for the counter
driver to work when PM is enabled. The sleep state is bound to the
counter start/stop functionality. TIMER3/4 block instances are
powered by PD_SYS and so sleep should be constrained when they are
up and running. On the other hand TIMER1/2 block instances are
powered by PD_TMR which is always on (used to generate the os tick).
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Rename nxp,kinetis-lptmr compat to nxp,lptmr.
Because of concerns over breaking downstream users,
keep support for the old compatible temporarily and
make it clear it should be changed.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The RTC subsystem in espressif's SOCs, among other tasks
is responsible for clock selection for CPU and for low
power domain clocks such as RTC_SLOW and RTC_FAST.
This commit allows for proper clock source and rate
selection for CPU, using the espressif,riscv and
espressif,xtensa-lx6/7 bindings.
It also enables clock selection for RTC_FAST and RTC_SLOW,
that impacts some peripherals, such as rtc_timer.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Let the callback execute after the interrupt status has cleared.
Because if the callback is executed before the interrupt status
is cleared, it might cause subsequent counter interrupts to fail to
trigger due to the callback function taking too long to execute.
Signed-off-by: Kevin Wang <kevinwang821020@google.com>
Use "const LL_TIM_OC_GetCompareCHx" & "const LL_TIM_IsEnabledIT_CCx" with
STM32G4X series, following changes in stm32cube:stm32g4xx:drivers:
include:stm32g4xx_ll_tim.h
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Use "const LL_TIM_OC_GetCompareCHx" & "const LL_TIM_IsEnabledIT_CCx" with
STM32F4X series, following changes in stm32cube:stm32f4xx:drivers:
include:stm32f4xx_ll_tim.h
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
check if top cb is null to avoid hard fault
top cb is allowed to be null in api so this is required
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Check that the max-frequency DT property matches the
one provided by the nrfx HAL.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of working it from a macro from the HAL
based on the DT address, let's just get the maximum
frequency directly from DT.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Spell checking tools do not recognize "iff", replace with "if and only if".
See https://en.wikipedia.org/wiki/If_and_only_if
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
