Commit 52e8b1058c (doc: project: clarify
WG member eligibility) broke the link to the collaborator section by
using nested inline markup, which is currently not supported:
https://docutils.sourceforge.io/FAQ.html#is-nested-inline-markup-possible
As the various workarounds are not recommended by Docutils, this change
simply ends the bold formatting before the link.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The second condition needs to check ARP probes only
The ACD is not properly implemented as described in RFC5227 ch. 2.1.1
The implementation incorrectly detects an IP conflict, if an ARP request
is received for the target IP.
The reason is that the current implementation checks for ARP requests
instead of ARP probes.
Signed-off-by: Andreas Huber <andreas.huber@ch.sauter-bc.com>
_xtos_pso_savearea and _xtos_core_restore_nw have been renamed to
xthal_pso_savearea and xthal_core_restore_nw in recent Xtensa
toolchains. Rename them in reset_vector.S to prevent linker errors
when building Zephyr with Xtensa toolchain.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
uart_poll_out had 1 ms timeout which is too short for lower baudrates.
Increase to 10 ms.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This resolves some addressed comments in this PR
https://github.com/zephyrproject-rtos/zephyr/pull/77930
It adds as well a section in the documentation about some
recommendations to increase ZMS performance.
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
Cleanup notrun tests with the -M option. This is used in the weekly
build and fails because devices will run out of space.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We no longer render Doxygen content in Sphinx after the removal of
breathe, so let's remove rst related aliases from Doxyfile. Also adjust
some headers that contained rst content.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
It's already mentioned in the board.tmpl template file as well as in
documentation writing guidelines so fix this leftover and make sure
people contributing boards aim for webp format as it helps with file
size while supporting transparency.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- Update GDMA and ADC drivers and remove deprecated entries.
- Rebased hal_espressif to latest bump sync.
- Added ESP Timer and Radio common config values
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Make sure all kconfig related to Wi-Fi is
in its driver area.
This commit also removes esp_timer_init() call
from Wi-Fi driver.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Updates to project configuration extras to build with
Zephyr Controller.
Configure for 2 broadcast audio sources in 2 groups,
2 unicast audio source in 1 group and, 2 audio sinks
for 1 group for both broadcast and unicast usecases.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enabled Periodic Advertising Sync Transfer feature in the
Bluetooth Low Energy HCI Controller samples.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Align Kconfig values used with bt-ll-sw-split Controller as
same used in hci_uart sample.
Relates to commit 2c6306d099 ("Bluetooth: Controller:
BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU")'.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compile error when BT_CTLR_PRIVACY is disabled. Compile
error seen building hci_uart sample for nrf54l15dk.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the sample so that multiple advertising setup can
be reused in other sample if required. Bluetooth enable can
be in the sample that reuses the advertising setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix buf alloc timeout to 20 millisecond as the sent callback
can have a latency that is upto twice the ISO interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Restrict possible maximum stream synchronization to
implementation defined 2 stream, as structure declarations
in the implementation is limited to 2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect use of BIS indices to dereference the payload
array, instead correctly use synchronised stream indices.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Extended UICR will not be used as its configurations will be merged
with the UICR registers in NVR.
Memory maps changes are needed to align with pre compiled
firmware.
Signed-off-by: Håkon Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
This commit updates the CI workflows to use the CI image v0.27.4, which
includes nrf-regtool v7.0.0.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Files renaming done to better isolate zephyr related
functions from stm32 hal related functions
Signed-off-by: Alessandro Manganaro <alessandro.manganaro@st.com>
Make the SMPS_MODE define visible from drivers by moving it to soc.h
This define is for example used by the ADC driver to determine if sampling
should be synchronized with the SMPS clock.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
The Seeed Studio XIAO ESP32S3 Sense board is a board based on the XIAO
ESP32S3 board with a soldered B2B connector that allows to connect
an extension board with a camera sensor, microphone and the sdcard slot.
Signed-off-by: Patryk Biel <pbiel7@gmail.com>
