- Adds Large Comp Data Server and Client
- Defines some dummy metadata for Health Server
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Some test cases require more control over transmission parameters used
when sending access messages.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Removed the tests for invalid bt_bap_broadcast_source_reconfigure
parameters and state, as those tests now implemented as unit tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a simple central and peripheral CIS test that
exercises the ISO host API for unicast ISO (CIS).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
bt_iso_cig_reconfigure would almost always fail due to invalid
checks that did not take the functioner properly into account.
The CIS provided to bt_iso_cig_reconfigure can now be allocated
beforehand, if the CIG for the CIS is the same as the one being
reconfigured.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This sample is an alternative implementation of hci_uart. The new sample
differs from the existing sample in that it uses the async UART API
instead of the interrupt driven API.
Included in this commit is a new test for HCI UART flow control. It's
enabled for hci_uart_async. The test can excercise also the existing
hci_uart sample (with some minimal changes to allow compiling in the
mock controller and test suite). The existing hci_uart sample currently
fails the flow control test.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This allows testing code that uses the UART interrupt-driven API and
UART asynchronous API.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The CONFIG_NET_L2_WIFI_SHELL isn't always enabled.
But these functions might still be used, so need to
move functions into mgmt.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
If an IPv4 address is requested on an IPv6 interface or vice versa
use a sane default fallback address to send the response.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Adjust model names and compats for Intel alder-lake boards. Names are now
consistent with names used in other Intel boards.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
Rename filename of binding for quicklogic,usbserialport-s3b to make it
consistent with compatible string.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
Update compatible strings and file names of Intel CPUs. Always use dash
instead of underscore. This will make all the compat strings and binding
files names for Intel consistent.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
Zephyr increments the gain until it reaches the maximum value and
then sets the registers to zero which is incorrect.
The values set in the DMIC config should be restored.
Signed-off-by: Fabiola Kwasowiec <fabiola.kwasowiec@intel.com>
The zperf shell sends a IPv6 ping at the start when working
with IPv6. Convert the sending of the ping to use the new API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add suitable functions that offloaded network device driver
can receive ICMP Echo-Request (ping) requests and give
ICMP responses back when it receives them from the network.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add new net_if_is_offloaded(iface) that returns true if
the network interface is offloaded (either IP or socket
offloading is enabled for that interface) and false if
the interface is not offloaded.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to send ICMP Echo Request message a.k.a pings.
The same ICMP API and framework is used for network stack
internal needs in later commits. One benefit for this new
API is that it allows sending Echo Requests to offlined
network devices.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add `mdio_read_c45()`/`mdio_write_c45()` APIs for Clause 45 access
and remove the `protocol` MDIO binding property so that MDIO bus
controller can support more than one protocol.
A new MDIO header is introduced with generic opcodes, MMD and
registers addresses, to be used by MDIO and PHY drivers.
Existing MDIO drivers that support both Clause 22 and Clause 45
access are migrated to the new APIs.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Rename argument `devad` to `regad` to indicate this is the register
address in a given PHY device and to not be confused with the
Clause 45 device address within a port.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add tests for the DHCPv6 library. The tests verify that:
* message format is valid for the outgoing messages
* incoming messages are only processed in respective states
* processing through standard DHCPv6 transactions is correct
(Solicit/Confirm/Renew/Rebind)
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add DHCPv6 support to the net config library. In case DHCPv6 is enabled,
net config will attempt to acquire IPv6 address and/or prefix when used.
The user can select with Kconfig whether to request address or prefix
(or both).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a DHCPv6 client implementation for Zephyr (RFC 8415).
The implementation allows to request IPv6 address and/or prefix from the
DHCPv6 server, and for now supports only the mandatory set of DHCPv6
options needed to achieve this. Currently the implementation supports
the following scenarios:
* Requesting new IPv6 address/prefix with Solicit/Request exchange
* Refreshing existing leases with Confirm, Renew or Rebind (depending
on the context).
For now, no Information Request (the case where neither IPv6 address or
prefix are requested) is supported. No support for Reconfigure was added
either, as this is optional (the client manifests clearly to the server
that it does not support Reconfigure). Support for these can be added
later if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
