To check if DVFS can be used, the CONFIG_NRFS_DVFS_LOCAL_DOMAIN symbol
needs to be used, not CONFIG_NRFS_HAS_DVFS_SERVICE which only indicates
that DVFS is technically possible, not that its local domain part is
actually included in the build.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Current nPM1300 charger driver does not work with batteries
without NTC thermistor. Added supported for this feature.
Signed-off-by: Javier Santos <jasr93@outlook.es>
This commit adds support for INA236 into the existing INA230 driver.
These two chips are similar enough to share most of the code.
The device can be defined the same way as INA230 and we only have
the extra option to select the high-precision mode.
```
ina236: ina236@40 {
status = "okay";
compatible = "ti,ina236", "ti,ina230";
reg = <0x40>;
adc-mode = "Bus and shunt voltage continuous";
vbus-conversion-time-us = <1100>;
vshunt-conversion-time-us = <1100>;
avg-count = <1>;
current-lsb-microamps = <1000>;
rshunt-micro-ohms = <15000>;
alert-gpios = <&gpiod 0 GPIO_ACTIVE_LOW>;
high-precision;
};
```
Signed-off-by: Tomáš Juřena <jurenatomas@gmail.com>
Enforce some minimum delay between enabling the voltage divider with a
GPIO and sampling the analog voltage. Without this delay the ADC can
easily sample the transient power up curve instead of the steady state
output.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Implement the parallel mode in the powertrain switch TLE9104.
This allows that OUT1 and OUT2 are controlled together, as well
as OUT3 and OUT4.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Inform the executor of a submissions completion with -ENOMEM
if the size of the workq is not big enough.
Signed-off-by: Florian Weber <Florian.Weber@live.de>
This function can be used to parse HCI-formatted subevent results
regardless of whether they come from CS Test or not
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
Add some defines for packet quality and rssi for RTT,
these are useful for filtering out steps where the RTT exchange
was unsuccessful
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
These options are in microseconds but not fully configurable,
document what options are allowed in 6.0
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
It's more common (and more readable) convention to use lower-case
names for string-based device tree property values. Convert the HCI bus
and quirks to follow this convention. Also take advantage of the
recently added support for string-array enums to enforce that the
correct values are used.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
To enable breakpoints on this board, remove the `dgdb_memory_map disable`,
which is a leftover from early development steps.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
This updates the SHA for SOF to their v2.11 release.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Although boards/index.rst is not included in the PDF toc, it seems as if
Sphinx tries to build the page anyway, which fails because the board
catalog directive is not outputting any node on non-HTML builders.
This commit fixes it by returning a "Board catalog is only available in
HTML." paragraph. In the future, we might want to output some kind of
static table or bullet list for non-HTML builders.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Support for R_XTENSA_SLOT0_OP was implemented with a relocation table
test case, containing only one entry at offset 0. For multiple
entries .r_addend has to be taken into account.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add I2C and SPI configuration to board DTS and mark as supported in YAML.
Also add support for arduino_i2c and arduino_spi.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Add I2C and SPI configuration to board DTS and mark as supported in YAML.
Also add support for arduino_i2c and arduino_spi.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Add I2C and SPI Device Tree nodes in SoC DTSI files to allow usage of these
peripherals.
Note that the SPI driver requires no modification to be functional on WB0.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Select COMBINED_INTERRUPT mode of operation for STM32WB0 to match the
hardware and allow the driver to build - no other modification required.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
- Disables on reset NMI and EzPort.
- Fixes frdm-k64 SW3 user button on reset issue.
So it can be assigned to the mcuboot-button0 alias.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
System lists are not thread safe, therefore all accesses should be
protected with a mutex. Introduce a LwM2M context specific mutex,
and use it whenever lists defined per-context are acessed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The LwM2M message allocation was not thread safe, i. e. the message was
acquired by setting the ctx pointer, and it was freed by clearing the
entire message structure.
If preemptive threads were enabled, and memset() clearing the message
content was preempted, the message structure being currently zeroed
migh've been allocated and initialized by some other thread. If the
thread releasing the message resumed work, it would continue clearing
the freshly allocated and initialized message structure.
In order to prevent this, introduce a new global mutex for the lwm2m
engine global variables. The mutex is used when LwM2M message is
allocated/deallocated. This will prevent reallocating the message
during the release process.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In "connect" all networks are removed and new network is always added,
but in disconnect the network isn't deleted, so, the memory is
unnecessarily held till next connect. This is not exactly a leak, but if
someone profiles using "kernel heap" then this can be construed as a
leak.
Fix this by removing network during the disconnection (for now "all") so
that the memory can be used by someone else.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
When shell is integrated with the logging frontend then pointer to
the logging backend in the shell structure is null. When null pointer
is found assume that it is a shell instance with logging frontend
integration and use frontend in the logging commands.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
ETR handler (for Coresight STM logging) is using console UART and
can act as the shell backend. When that happens default serial shell
backend shall be disabled (and it is by default enabled if there is
a zephyr,console chosen set.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Extend ETR handler to be able to work as shell backend and multiplex
Coresight STM logging with shell content on the UART used by the
ETR handler. Shell backend works only in the standalone mode.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
